Russell H-D300L22 User Manual

1/2 to 3 HP

4 to 6 HP

MEA

MiniCon - H Series

Air Cooled Condensing Units 1/2 to 6 HP Brochure 502.12 rev.5

January, 2007

Our newly re-designed condensing unit is:

installation friendly

service friendly

compact and efficient

NOW AVAILABLE

THROUGH 6 HP

H L D 500 H 22 —E

Description

Options

Nomenclature

Refr

igerant Type 22 = R-22 44 = R-404A / 507

emperature Range (varies by unit) H = High /Medium (0° to 55°S.T.) M = Medium (-10° to 45° S.T.) L = Low (-40° to 25° S.T.)

Horsepo

wer 050 = 1/2 HP 075 = 3/4 HP 100 = 1 HP 101 = 1 HP 150 = 1-1/2 HP 151 = 1-1/2 HP 165 = 1-1/2 HP 200 = 2 HP 201 = 2 HP 202 = 2 HP

215 = 2 HP 250 = 2 HP 251 = 2HP 300 = 3 HP 301 = 3 HP 315 = 3 HP 400 = 4 HP 401 = 4 HP 500 = 5 HP 600 = 6 HP 650 = 6-1/2 HP

HTP MiniCon H-Series

Model Style L = Outdoor Flooded Model

Compressor

Type S = Semi-Hermetic H = Hermetic D = Discus O = Scroll

Voltage code

C=230/60/1 D= 208-230/60/1 E= 208-230/60/3 G= 460/60/3

Indoor/Outdoor Models (HLH / HLS / HLD / HLO)

• Hermetic, Semi-hermetic, Discus or Scroll compressor.

• Generously sized condenser, Copper tubes/Aluminum fins

• Large electrical control panel for power and control circuits

• Compressor contactor or start kit

• Encapsulated high and low pressure controls (adjustable low pressure control on low temp models)

• Refrigerant receiver with shutoff valve and relief plug

• All-weather housing

• Liquid line kit with filter/drier and sight glass with moisture indicator

• Suction line piping to exterior of cabinet

• Low Ambient - flooded head pressure control valve

• Crankcase heater

• Electric defrost timer with defrost contactor/relay on low

temperature models (ED10-230/1)

• Air Defrost Timer (2-1/2 through 6 HP High and Medium temp

models only, optional for other HP)

• UL and C-UL listed for indoor or outdoor use

• Wire fan guard(s) kit

• Suction filter (Loose)

• Suction accumulator (Loose)

• Oil separator (Loose)

• Crankcase heater (Loose)

• Tiered stacking

• Liquid line solenoid (Loose)

• Fused disconnect (Loose)

HTP H-Series condensing units are ideally suited for use

in a variety of commercial applications such as cafeterias,

convenience stores, restaurants and fast food outlets. H -Series units offer a winning combination of quality, economy, and flexibility coupled with lower long term operating costs.

This low profile product line has been designed around environmentally safer refrigerants. All models utilize R-22 or R-404A. Units are available with a choice of compressors: low cost hermetic and scroll or heavy duty semi-hermetic and discus.

In addition to the basic Indoor and Outdoor models described in this bulletin, HTP can also provide pre-engineered system packages with matching evaporators and accessories.

These HTP condensing units are designed for operation in ambient air temperatures up to 110°F. Oversized condensers are available for most models. Contact our Applications Engineering department for requirements exceeding 110°F ambient temperature.

Features

DESCRIPTION HLH HLD HLS HLO

Hermetic STD N/A N/A N/A

Discus N/A STD N/A N/A

Semi-Hermetic N/A N/A STD N/A

Scroll N/A N/A N/A STD

Oil failure control (as required) N/R STD STD N/R

Encapsulated high and low pressure controls**

Compressor contactor (1Ø or 3Ø), start kit (1Ø)

Control transformer (460v to 230V) as required

Copper tubes , Aluminum fins

Fan motor(s) - overload protection

Fan blade(s) - individually balanced

Suction line ( vibrasorber† and piping only)

*Liquid line kit

Discharge vibrasober N/R STD†† STD†† N/R

Shut-off valve(s)

Fusible plug

Galvanized steel all weather housing

Control panel

CONTROLS

Flooded head pressure control

Air defrost time clock

Electric defrost package (1) (1) (1) (1)

UL and C-UL listed

Leak and dielectric tested before shipping

Dry Nitrogen shipping charge (25 to 35 PSI)

RECEIVER

HOUSING

DEFROST

PROVISIONS

TESTING

STANDARD

STD on 3-6 HP

STANDARD

PACKAGED UNITS

STANDARD

COMPRESSOR

ELECTRICAL

CONTROLS

CONDENSER

PIPING

COMPONENTS

Features and Options

STD = Standard Feature N/R = Not Required N/A = Not Available

† Vibrasorber not required for Hermetic and Scroll compressors.Vibrasorber not included for 1/2 through 2HP models, Add optional kit

SPR-VB if suction vibrasorber required. ††Standard for 2-1/2 through 6HP Models. For 1/2 to 2HP models, add kit number SPR-VB to include vibrasorbers and compressor spring mounting. *Liquid line kit includes: piping, filter drier, sight glass/moisture indicator. ** Adjustable low pressure control on low temp models in lieu of fixed control. (1) Electric defrost kit is included on Low temperature models. ED-10-230/1 for 1/2 to 3 HP models, and ED11-230/3 for 4 to 6 HP models.

1/2 through 3 HP

4 through 6 HP

+ 5 hidden pages