Flow-Temp
Low Velocity
Now available with optional
EC Motors
High Efficiency / High Reliability
Unit Cooler
Publication No. 110.9
November, 2008
• Applications
The
Flow-Temp
suited for meat cutting, holding and packaging rooms
as well as produce storage and florist boxes.
• Sizes
There are eight models available, ranging in capacity
from 6,700 to 37,000 BTUH@ 10° TD.
• Housing
Rust free heavy gauge textured Aluminum is standard. Optionally available with white enamel coating.
• Coil
Seamless copper tubes are staggered and mechanically expanded into heavy gauge corrugated Aluminum fins assuring maximum heat transfer.
Optionally available with copper or phenolic coated
fins.
low velocity unit coolers are ideally
221 S. Berry St., P.O. Box 1030, Brea, CA. 92822-1030 • Tel (714)529-1935 • Fax (714)529-7203
• Motors/fans
Fan motors and blades can be easily accessed by lowering
the hinged drain pan. Standard motors are permanently
lubricated with thermal overload protection. Available in
115V or 208/230V single phase. Available with optional high
efficiency PSC or EC motors.
• Electrical
Available in 115V and 208/230V. All components are factory
wired to terminal strips and are UL and cUL listed.
• Defrost
All models are available in air, electric and hot gas
defrost designs. Air defrost units are suitable for use in coolers down to 35°F. Electric, Hot Gas Re-Evap and Hot Gas
Reverse Cycle coils are designed for use in rooms down to
28°F.
Visit us on th web at: www.russellcoil.com
Performance and Electrical Data
MODEL
NUMBER
FL 2 6-6 7
FL36-100
FL36-135
FL36-160
FL46-180
FL46-220
FL46-265
FL56-370
CAPACITY (Btu/hr)
10°F 15°F 20°F
TD TD TD
6,700 10,050 13,400
10,000 15,000 20,000
13,500 20,250 27,000
16,000 24,000 32,000
18,000 27,000 36,000
22,000 33,000 44,000
26,500 37,950 53,000
37,000 55,500 74,000
CFM
1050
1220
1670
1820
2230
2420
2420
2830
SP MOTOR
QTY
AMPS AMPS
115V 230/1
2 1.2 .6
3 1.8 .9
3 3.3 1.65
3 3.3 1.65
4 4.4 2.2
4 4.4 2.2
4 4.4 2.2
5 5.5 3.3
Flow-Temp
PSC MOTOR
AMPS AMPS
115V 230/1
.72
1.1
1.1
1.1
1.4
1.4
1.4
1.8
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
EC MOTOR
AMPS AMPS
115V 230/1
.8
1.2
1.2
1.2
1.6
1.6
1.6
2.0
.4
.6
.6
.6
.8
.8
.8
1.0
ELECTRIC DEFROST HEATERS
WATTS 230V/1 230V/3
FL 2 6-6 7 E
FL36-100E
FL36-135E
FL36-160E
FL46-180E
FL46-220E
FL46-265E
FL56-370E
NOTE:
Air defrost models are suitable for +35°F room temperature and
above. Electric and Hot Gas defrost suitable for +28°F room
temperature and above.
3940
5960
5960
5960
8060
8060
8060
9920
17.2
26.0
26.0
26.0
35.0
35.0
35.0
43.1
14.8
22.5
22.5
22.5
21.3
21.3
21.3
28.5
460V/1
8.6
13.0
13.0
13.0
17.5
17.5
17.5
21.6
Physical Data
MODEL
NUMBER
FL 2 6-6 7
FL36-100
FL36-135
FL36-160
FL46-180
FL46-220
FL46-265
FL56-370
1
All models require externally equalized TXV.
AB CD W
48 7-1/2 6-1/4 8-1/2 58-1/2
36 7-1/2 6-1/4 8-1/2 82-1/2
36 10-1/2 9-3/4 12 82-1/2
36 10-1/2 9-3/4 12 82-1/2
48 10-1/2 9-3/4 12 106-1/2
48 10-1/2 9-3/4 12 106-1/2
48 13-1/2 12-3/4 12 106-1/2
60 13-1/2 12-3/4 15 130-1/2
DIMENSIONS (in)
MODEL NOMENCLATURE: 2 6 - 67 E -E S
Number of fans
Fins Per Inch
Capacity (BTUH in hundreds)
Defrost type
A = Air Voltage
E = Electric A = 115/1/160
H = Hot Gas Re-Evap D = 208-230/1/160
G = Hot Gas Reverse Cycle F = 460/1/60
Motor type
S = Shaded Pole
P = PSC
E = ECM
CONNECTIONS (in.)
LIQUID SUCTION DRAIN
1/2 F.N. 7/8 OD 3/4 MPT
1/2 F.N. 7/8 OD 3/4 MPT
1/2 F.N. 1-1/8 OD 3/4 MPT
1/2 F.N. 1-1/8 OD 3/4 MPT
1/2 F.N. 1-1/8 OD 3/4 MPT
1/2 F.N. 1-1/8 OD 3/4 MPT
1/2 F.N. 1-1/8 OD 3/4 MPT
1/2 F.N. 1-1/8 OD 3/4 MPT
1
SHIP WT.
(LBS)
155
205
265
285
325
340
370
490
Visit us on th web at: www.russellcoil.com
221 S. Berry St., P.O. Box 1030, Brea, CA. 92822-1030 • Tel (714)529-1935 • Fax (714)529-7203
P/N 122300009 REV.9A 11/08 R-3000