Rudd 81V80HE-T User Manual

HOT
COLD
VALVE
R
8"
B
WATER CONNECTION NIPPLES ALL 3/4" N.P.T.
COLD INLET
HOT
OUTLET
A
COLLECTOR
RETURN
COLLECTOR
FEED
SENSOR
PROBE
PORT
WATER CIRCULATOR
(REQUIRED FOR NON-
GRAVITY SYSTEMS)
S
OLAR
EN
E
RGY
COLLE
CTO
R
SUI
TAB
LE FOR
POTABLE WATER
A
ND P
R
OPYLENE
GYLCOL
S
O
LUTI
O
N
7"
Solaraide
HE Solar Heat Exchanger, Solar Tank, or Electric Storage Water Heater
Available in 80 and 120 Gallon Models
6-Year Limited Tank and Parts Warranty*
Both models have at least 40 gallons of
hot water storage at all times
ouble wall heat exchanger: copper
D
ubing wrapped around and secured to
t
he tank for positive leak detection
t Choice of two models…storage
tank or single element water heater specifically engineered for installation with residential indirect solar water heating systems Collector feed and return fittings
located at front of tank for convenient installation Isolated tank design for better
heat retention High efficiency backup heating element
Rheemglas®tank lining resists
corrosion and prolongs tank life
DESCRIPTION ROUGHING IN DIMENSIONS (SHOWN IN INCHES) ENERGY INFORMATION
T Y
GAL. WATTAGE HEIGHT DIAMETER SHIP WT. R-
P
CAP. MODEL NUMBER UPPER AB(LBS.) FACTOR
E
80 81V80HE-1 4500 W* 58-3/4 24-1/2 222 R-17.3
80 81V80HE-T Storage only 58-3/4 24-1/2 222 R-17.3
120 82V120HE-1 4500 W* 62 28-1/4 380 R-17.3
120 82V120HE-T Storage only 62 28-1/4 380 R-17.3
* Heaters furnished with standard 240 volt AC, single phase non-simultaneous wiring and 4500 watt heating element.
If heating elements of different wattages than those shown are demanded by zone requirements, they must be specifically requested.
• To prevent corrosion, proper pH levels in transfer fluid must be maintained.
• Solaraide models meet all current state requirements for solar storage tanks.
• The tanks are Rheemglas lined and are designed to operate up to 150 PSI.
ELEMENT APPROX.
Brass drain valve
Cold water inlet brings cold water to
tank bottom to prevent mixing with heated water Anode rod equalizes aggressive water
action for prolonged tank life Cold water inlet, hot water outlet, relief
valve and anode rod at top of tank for easy access and fast, economical installation Temperature and pressure relief valve
included Automatic temperature control
Over temperature protector
* See Residential Warranty Certificate for
complete warranty information.
APPROX.
A special 1/2" NPT opening is provided
for installation of a “probe type” thermostat.
COPPER HEAT EXCHANGER COIL
Type L Copper 5/8" I.D.
Solaraide HE Coil Capacity Length of Tubing
Tank Capacity Gallons Around Tank (Ft)
Rheem Water Heating • 101 Bell Road, Montgomery, Alabama 36117 • www.rheem.com
P RIN TE D IN U. S. A 0 5/1 0 WP F ORM NO . 10 1- 16 R ev . 1 5
80 Gallons 2.2 120
120 Gallons 2.6 143
PRESSURE DROP THROUGH COIL (Feet of H20)
Flow Rate 80 Gallon 120 Gallon
1 GPM 1.3 1.6 2 GPM 4.8 5.7 3 GPM 10.0 12.0
In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.
Head Loss (Feet)
Loading...