Royal sovereign LAMINATOR, RSH LAMINATOR, RSR LAMINATOR, RSS LAMINATOR User Manual

21
RSS, RSR and RSH Series Laminator
OWNER'S MANUAL
Royal Sovereign International Inc.
www.royalsovereign.com
Read all instructions carefully before use.
For any Customer Support needs please choose the
RS International Australia PTY. LTD.
30 Prime Drive, Seven Hills, NSW 2147, Australia TEL : +61) 2-9674-2127 FAX : +61) 2-9674-2027 E-mail : salesaust@royalsovereign.com
CORPORATE HEADQUARTERS
Royal Sovereign International Inc.
2 Volvo Drive, Rockleigh, NJ 07647 U.S.A. TEL : +1) 800-397-1025 FAX : +1) 201-750-1022 E-mail : info@royalsovereign.com
Royal Sovereign Inc.
<Oversea Sales Office>
1001, World Meridian II, 426-5, Gasan-dong, Geumcheon-gu, Seoul, 153-759, KOREA TEL : +82)2-2025-8800 FAX : +82)2-2025-8830 E-mail : sales@royalsovereign.com
RS Canada Inc.
164 Oakdale Road, Toronto, Ontario M3N 2S5 CANADA TEL : +1) 416-741-8400 FAX : +1) 416-741-8185 E-mail : info@royalsovereign.com
RS Holland B.V.
Planetenweg 75 2132HM Hoofddorp, The Netherlands. TEL : +31) 23-5626620, +31) 23-5654451 FAX : +31) 23-5654565 E-mail : purchaseorder@royalsovereign.com
18. W ARRANTY
Royal Sovereign International warrants the equipment sold is free from defects in material and workmanship for a period of One (1) year for Parts and Labor from the date of installation, excluding lamination rollers which are warranted for Six (6) months. This warranty is extended only to the original purchaser. This warranty is the only warranty made by Royal Sovereign International and cannot be modified or amended. Royal Sovereign’s sole and exclusive liability and the customer’s sole and exclusive remedy under this warranty shall be, at Royal Sovereign’s option, to repair or replace any such defective part or product. These remedies are only available if Royal Sovereign’s examination of the product discloses to Royal Sovereign’s satisfaction that such defects actually exist and were not caused by misuse, neglect, attempt to repair, unauthorized alternation or modification, incorrect line voltage, fire, accident, flood or other hazard.
All warranty claims must be filed through the authorized Royal Sovereign dealer or reseller through which the equipment was originally purchased. Model, serial number and date of delivery are required for all claims.
The warranty made herein is in lieu of all other warranties, expressed or implied, including any warranty or merchantability or fitness for a particular purpose. Royal Sovereign will not be liable for personal damage or personal injury (unless primarily caused by its negligence), loss of profit, or other incidental or consequential damages arising out of the use or inability to use this equipment.
This warranty specifically does not cover damage to laminating rollers caused by knives, razor blades, or any sharp objects or abrasives, or failure caused by adhesives, or damage caused by lifting, tilting or improper use of the machine. Warranty repair or replacement by Royal Sovereign or its authorized Reseller(s) does not extend the warranty beyond the initial one year period from the date of installation. Unauthorized customer alterations will void this warranty.
LIMITED WARRANTY
RSS, RSR, RSH Series
21
TABLE OF CONTENTS
1. INTRODUCTION
TOPIC PAGE
1. Introduction.......................................................................................................... 2
2. Safety Precautions............................................................................................... 2
3. Installation ............................................................................................................ 3
4. Included with Laminator.......................................................................................4
5. Product Identification.............................................................................................5
6. Control Panel........................................................................................................ 6
7. Speed and Temperature Settings ....................................................................... 8
8. Roller Nip Settings................................................................................................ 8
9. Using Foot Pedal and Remote Control................................................................ 9
10. Using Cross Cutter ............................................................................................ 9
11. Using Slitter...................................................................................................... 10
12. Loading Film
12.1. Installation of the core plugs................................................................... 11
12.2. Installation of the auto grip...................................................................... 12
13. Threading Film
13.1. Laminating and Encapsulation................................................................ 13
13.2. Decaling .................................................................................................. 15
13.3. Mounting ................................................................................................. 16
14. Installation of the Front Feed and Rear Rewind Options................................ 18
15. Maintenance..................................................................................................... 19
16. Troubleshooting ............................................................................................... 19
17. Specifications...................................................................................................20
18. Warranty........................................................................................................... 21
Thank you for choosing a Royal Sovereign laminator. It has been designed and manufactured to provide years of continuous service. For complete operating and maintenance information please read this manual thoroughly. Upon receipt of your laminator, please inspect the box, the machine and all other contents for shipping damage. Damage should be brought to the immediate attention of the delivering carrier (See page 4 for list of shipment elements).
2. SAFETY PRECAUTIONS
Failure to comply with any of the following safety procedures could result in serious injury. Please read the instructions carefully and keep for future reference.
1. Only a licensed electrician should install wiring and outlet for the laminator.
2. Ensure the unit is plugged into a properly grounded outlet with the correct voltage.
3. Keep hands and clothing (i.e. Neckties) away from rollers. The rollers have pinch points that can trap body parts or clothing and cause serious injury.
4. Keep flammable and wet objects away from the machine.
5. Place machine on a level surface.
6. Avoid excessive sunlight, humidity and extreme temperatures.
7. Ensure the unit is turned off, cooled, and unplugged from the outlet prior to moving and/or repairing.
8. Keep out of reach of children.
9. Only Royal Sovereign authorized maintenance and service technicians should make repairs.
10. Do not attempt to laminate items that exceed total recommended material thickness
for the unit.
11. When cleaning the machine, don't use flammable sprays or materials.
12. Do not touch the rollers when they are hot or place foreign objects inside the machine.
13. Do not cover the surface of the machine until the machine has completely cooled.
RSS, RSR, RSH Series
43
3. INSTALLATION
Note: The laminator should be installed by a trained service technician.
ELECTRICAL REQUIREMENTS
The laminator comes fully assembled, except for the feed table and paper guide to avoid shipping damage. Upon arrival, thoroughly inspect the unit. It is imperative that any shipping damage is reported and a claim is filed with the delivering carrier immediately upon receipt.
The laminator should be located in an area with adequate work space for feeding graphics and lamination materials.
Avoid placing the laminator in a dusty area or near sources of extreme heat or cold.
Once the laminator is in place, lock the casters into position(“ON” position). Always unlock the casters (“OFF” position) when moving to a different location.
4. INCLUDED WITH LAMINATOR
Thoroughly inspect the parts and the unit. It is imperative that any missing parts are reported and a claim is filed with the reseller immediately upon receipt of shipment.
Royal Sovereign recommends that a licensed electrician ensures proper power to your laminator in accordance with electrical codes in your area.
The laminator should have a dedicated power line.
MODEL
RSS-685 / RSS-1050 /
RSR-685 RSR-1050 RSH-1050 RSH-1650
RSS-685N RSS-1050N
Power supply AC 200 ~ 220V, AC 230 ~ 240V, 50/60HZ Single phase
Part Name
Laminator
Owner's Manual
3´´(76mm) / 2" (57mm) Core Plugs
Core - Bolts
Dust Cover
Spare Motor Fuse - FUSE(50T)
6.3A
Spare Main Power Fuse - FUSE(65TS)
15A / 20A(only RSH-1650)
Roll film Samples
8 - 1/4"Hexa head Bolt (M6
@?hf /Xe@??W.?h V/X?@?W.Y?h ?V/?@?.Yhe
W.?/X?he ?W.Y?V/Xhe ?.Y?eV/he
20mm)
8 - Spring Washer(
?@h J5h
?O&Hh
O2@@@@@?O@g
W2@0M??W@@@@g ?W&(M?e?7<I'@g ?7@Hf?@eN@g J@5?fJ5e?@g 7@H?f7Hhe @@g@?he @@f?J5?he @@f?7H?he @@f?@hf 3@L?eJ5hf N@1?e7Hhf ?3@Le@?fW.g ?V')KC5?e?O.Yg
V4@@Y??O20Y?g
?@@@@0M?h J(M?hf 7Hhg @?hg
6.1)
(Included with option only)
Front Feeder and Rear Rewinder Kit
(Included with option only)
1
1
6/6
6
1
1
1
2
10/10
2/2
Quantity Picture
12 - 3/16"screw (M5
@?hf /Xe@??W.?h V/X?@?W.Y?h ?V/?@?.Yhe
W.?/X?he ?W.Y?V/Xhe ?.Y?eV/he
10mm).
12 - Spring Washer(
?@h J5h
?O&Hh O2@@@@@?O@g W2@0M??W@@@@g
?W&(M?e?7<I'@g ?7@Hf?@eN@g J@5?fJ5e?@g 7@H?f7Hhe @@g@?he @@f?J5?he @@f?7H?he @@f?@hf 3@L?eJ5hf N@1?e7Hhf ?3@Le@?fW.g ?V')KC5?e?O.Yg
V4@@Y??O20Y?g ?@@@@0M?h J(M?hf 7Hhg @?hg
5.1)
(Included with option only)
12/12
230V UL 220V EU 240V UK
3´´(76mm) / 2" (57mm) Auto Grip
(Included with US only )
L-wrench (2.5)
(Included with US only )
6/6
1
RSS, RSR, RSH Series
65
5. PRODUCT IDENTIFICATION 6. CONTROL PANEL
1 15 2 3 4
5
6
7
8
14
13
10
9
12
11
No. PART NAME
RSS-685/ RSS-1050/
RSR-685 RSR-1050 RSH-1050 RSH-1650
RSS-685N RSS-1050N
1 FILM ALIGNMENT KNOB O O O O O X 2 EMERGENCY SWITCH O O O O O O 3 SAFETY COVER O O O O O O 4 FRAME-PAPER GUIDE O O O O O O 5 FEED TABLE O O O O O O
HOT ROLLER X X X X O O
6 ROLLING SHOE X X O O X X
HOT SHOE O O X X X X 7 ASSEMBLY STAND O O O O O O 8 REMOTE CONTROL O O O O O O 9 FOOT PEDAL O O O O O O
10
TENSION CONTROL KNOBS
OOOOOO 11 PRESSURE LEVER O O O O O O 12 CONTROL PANEL O O O O O O 13 UPPER IDLE BAR O O O O O O 14 TAKE-UP SWITCH O O O O O O 15
RELEASE LINER TAKE UP
OOOOOO 16 TEMPERATURE DISPLAY
? ? ? ? ? ? ? ? ? ? ?
? W2@6X?hg? ?W.M?I/Xhg? ?7H?eN1hg? ?@f?@hg? ?3L?eJ5hg? ?V/K?O.Yhg? V4@0Y?hg?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
C
/
?W2@6Xhg ?7<?I/X?hf ?@e?N1?hf ?@f@?hf ?@e?J5?hf ?3=?O.Y?hf ?V4@0Yhg
F
? ? ? ? ? ? ? ? ? ? ?
? W2@6X?hg? ?W.M?I/Xhg? ?7H?eN1hg? ?@f?@hg? ?3L?eJ5hg? ?V/K?O.Yhg? V4@0Y?hg?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
C
/
?W2@6Xhg ?7<?I/X?hf ?@e?N1?hf ?@f@?hf ?@e?J5?hf ?3=?O.Y?hf ?V4@0Yhg
F
? ? ? ? ? ? ? ? ? ? ?
? W2@6X?hg? ?W.M?I/Xhg? ?7H?eN1hg? ?@f?@hg? ?3L?eJ5hg? ?V/K?O.Yhg? V4@0Y?hg?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
C
&
?W2@6Xhg ?7<?I/X?hf ?@e?N1?hf ?@f@?hf ?@e?J5?hf ?3=?O.Y?hf ?V4@0Yhg
F
? ? ? ? ? ? ? ? ? ? ?
? W2@6X?hg? ?W.M?I/Xhg? ?7H?eN1hg? ?@f?@hg? ?3L?eJ5hg? ?V/K?O.Yhg? V4@0Y?hg?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
C
&
?W2@6Xhg ?7<?I/X?hf ?@e?N1?hf ?@f@?hf ?@e?J5?hf ?3=?O.Y?hf ?V4@0Yhg
F
? ? ? ? ? ? ? ? ? ? ?
? W2@6X?hg? ?W.M?I/Xhg? ?7H?eN1hg? ?@f?@hg? ?3L?eJ5hg? ?V/K?O.Yhg? V4@0Y?hg?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
C
&
?W2@6Xhg ?7<?I/X?hf ?@e?N1?hf ?@f@?hf ?@e?J5?hf ?3=?O.Y?hf ?V4@0Yhg
F
? ? ? ? ? ? ? ? ? ? ?
? W2@6X?hg? ?W.M?I/Xhg? ?7H?eN1hg? ?@f?@hg? ?3L?eJ5hg? ?V/K?O.Yhg? V4@0Y?hg?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
C
&
?W2@6Xhg ?7<?I/X?hf ?@e?N1?hf ?@f@?hf ?@e?J5?hf ?3=?O.Y?hf ?V4@0Yhg
F
When the machine is initially turned on, the LCD window will display the last working preset memory setting.
LCD Display
1. READY – When the preset temperature is reached.
2. WAIT – Blinks until preset temperature is reached.
3. STND-BY – When STND-BY button is manually pressed or if the machine has been standing idle for 2 hours. In this mode, the temperature will automatically reset to 176°F (80°C). After another hour, power will automatically shut off.
4. UPPER TEMPERATURE – Displays upper roller set temperature.
5. LOWER TEMPERATURE – Displays lower roller set temperature.
6. SPEED – Displays set speed.
7. PRGM – Displays set memory.
LCD
BUTTON
RSH Series RSR Series RSS Series
Loading...
+ 7 hidden pages