Rowenta PERFECT PRO IMPORTANT POINTS User Manual
einleger 01.12.2004 10:54 Uhr Seite 1
NEW GARMENT
STARCHING
DO NOT IRON NEW GARMENTS
without washing them first and
ensure that linen is always rinsed
thoroughly
STARCHING ON REVERSE OF FABRIC
If you use starch, it should be
sprayed on the reverse of the fabric
If you have any product problems or queries, do not
return to the retailer but call our Customer Relations
Team first for expert help and advice on:
HELPLINE
0845 602 1454 - UK
(calls charged at local rate)
(01) 4751947 - Ireland
Or consult our web site: www.rowenta.co.uk
IMPORTANT
POINTS TO NOTE
110 347 5285 (NG 9000)
einleger 01.12.2004 10:54 Uhr Seite 2
SOLEPATE
PROTECTOR
1 MIN
BEFORE
EACH USE
ANTI-
CALC
CHEMICAL
DE-SCALING
TAP WATER ONLY
REMOVE SOLEPATE PROTECTOR
Before first use, remove the
soleplate sticker
BEFORE FIRST USE AND EACH TIME
YOU BEGIN TO IRON
Allow the iron to steam for at least
1 minute away from linen to remove
impurities
NO CHEMICAL DE-SCALING
Do not use chemical de-scaling
agents
USE UNTREATED TAP WATER ONLY
Do not use scented, softened, boiled
or filtered water
ADJUST
THERMOSTAT
ANTI DRIP
INTRA STEAM
ADJUST THERMOSTAT
Adjust the iron’s thermostat and
steam control ie less steam for low
temperatures
ANTI DRIP
If the temperature is too low, the
iron cannot produce steam because
of the anti-drip technology which
prevents droplets of water leaking
from the soleplate
INTRA STEAM =
PRESSURE + INTERVALS
This exclusive, innovative technology
generates powerful steam pressure
which enables the steam to penetrate quickly and deeply into the
fabric. The steam is emitted in
frequent bursts rather than continuously. This ensures a perfect
balance of moistening and then drying the fabric. This function works
automatically. You may hear a slight
noise when the pressure is generated - this is not a technical
fault
Loading...