Rotronic Logger Cap Data sheet

www.amebisltd.com.

Technical Datasheet
Logger Cap

Part No. U001-01

Description

Connects to sensor cap (U002-01) during stability testing and
monitoring/mapping applications. Each logger cap has a
unique identification number and is used to store the
temperature and humidity readings from the sensor cap and
transmit the data wirelessly to the Amebis Control Software.
The logger cap is powered by a 9V battery which also powers
the sensor.

As part of the test initiation process a logger cap is docked to
the basestation (U003-01) and test settings are sent via the
Amebis Control Software, the logger cap is then attached to
the sensor cap.

Specifications

Colour

Weight

Dimensions

Material of Construction

Operating Temperature

Power Supply

Range

Memory

Marking/Labelling

Delivery Documentation

Storage

Black

100grms.

Height 2.0cm Diameter 7.5cm

Polycarbonate / Acrylobutylstyrene

00C – 600C

9V battery (U016-01). Replace by removing battery door beside connector

10 metres (line of sight)

8,300 Temperature & Humidity Readings

Serial number on outside of logger cap.

This datasheet.

Store in a dry, cool and clean place when not in use.

Basestation connected to

computer

www.amebisltd.com.

Logger cap connected to

basestation to receive

test settings

Sensor cap fitted to test

chamber

Sensor cap attached to stand

Logger cap attached to sensor cap for

stability testing application

Logger cap attached to sensor cap

for monitoring applications

Warning

The logger cap should only be connected to a sensor cap or basestation and has not been designed for
connection to any other cable or part.

Datasheet 4.1