RDA-985
DTS DECODER
Owner’s Manual
5.1 CH
WARNING:
TO REDUCE THE RISK OF FIRE
OR ELECTRICAL SHOCK, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR MOISTURE.
IN OUT
OUTPUTINPUT
FRONT REAR
CENTER
SUBWOOFER
L
R
DTS DECODER
MODEL NO. RDA-985
POWER CONSUMPTION: 10W
RDA-985
IN
OPTI COAX
DIGITAL
DTS DECODER RDA-985
POWER DTS SIGNAL
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS:
RISQUE DE CHOC ELECTRIQUE–NE PAS OUVRIR
DTS DECODER RDA-985
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE
OF PLUG TO WIDE SLOT. INSERT FULLY.
APPLICABLE FOR USA, CANADA OR WHERE
APPROVED FOR THE USAGE
ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE
DANS LA BORNE CORRESPONDANTE DE LA PRISE ET
POUSSER JUSQU AU FOND.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING:
There are no user serviceable parts inside. Refer all servicing to
qualified service personnel.
WARNING:
To reduce the risk of fire or electric shock, do not expose the
RDA-985 to moisture or water. Do not allow foreign objects to get
into the enclosure. If the unit is exposed to moisture, or a foreign
object gets into the enclosure, immediately disconnect the power
cord from the wall. Take the unit to a qualified service person for
inspection and necessary repairs.
Read all the instructions before connecting or operating the RDA-985. Keep this
manual so you can refer to these safety instructions.
Heed all warnings and safety information in these instructions and on the
product itself. Follow all operating instructions.
Clean the RDA-985 only with a dry cloth or a vacuum cleaner.
Keep the ventilation inlets on the unit unobstructed. For example, do not place
the unit on a bed, sofa, rug, or similar surface that could block the ventilation
slots. If the RDA-985 is placed in a bookcase or cabinet, there must be sufficient clearance around the unit and ventilation of the cabinet to allow proper
cooling.
Keep the RDA-985 away from radiators, heat registers, stoves, or any other
appliance that produces heat.
The RDA-985 must be connected to a power supply only of the type and voltage
specified on the rear panel of the unit.
Connect the RDA-985 to the power outlet only with the supplied 2-pin polarized
power supply cable or an exact equivalent. Do not modify the supplied cable in
any way. Do not attempt to defeat grounding and/or polarization provisions. The
cable should be connected to a 2-pin polarized wall outlet, matching the wide
blade of the plug to the wide slot of the receptacle. Do not use extension cords.
Do not route the power cord where it will be crushed, pinched, bent at severe
angles, exposed to heat, or damaged in any way. Pay particular attention to the
power cord at the plug and where it exits the back of the unit.
The power cord should be unplugged from the wall outlet if the unit is to be left
unused for a long period of time.
Immediately stop using the RDA-985 and have it inspected and/or serviced by a
qualified service agency if:
• The power supply cord or plug has been damaged.
• Objects have fallen into or liquid has been spilled into the unit.
• The unit has been exposed to rain.
• The unit shows signs of improper operation
• The unit has been dropped or damaged in any way
Place the RDA-985 on a fixed, level surface strong
enough to support its weight. Do not place the
RDA-985 on a moveable cart that could tip over.
This symbol is to alert the user to the
presence of uninsulated dangerous
voltages inside the product's enclosure
that may constitute a risk of electric shock.
This symbol is to alert the user to important
operating and maintenance (service)
instructions in this manual and literature
accompanying the product.
RDA-985
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Figure 1 – Controls and Connections
1
5.1 CH
WARNING:
TO REDUCE THE RISK OF FIRE
OR ELECTRICAL SHOCK, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR MOISTURE.
IN OUT
OUTPUTINPUT
FRONT REAR
CENTER
SUBWOOFER
L
R
DTS DECODER
MODEL NO. RDA-985
POWER CONSUMPTION: 10W
RDA-985
IN
OPTI COAX
DIGITAL
DTS DECODER RDA-985
POWER DTS SIGNAL
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS:
RISQUE DE CHOC ELECTRIQUE–NE PAS OUVRIR
1122 3 4
5 6 7 8 11109
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Figure 2 – Basic Wiring Connections
AUX
5.1 CH INPUT
WARNING:
TO REDUCE THE RISK OF FIRE
OR ELECTRICAL SHOCK, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR MOISTURE.
MONITOR
TV
DIGITAL INPUT
FRONT REAR CENTER
SUB
L
R
POWER
OUTPUT
TUNER CD TAPE VIDEO 1 VIDEO 2 VIDEO 3
IN OUT
VIDEO 4
IN OUTIN OUTIN OUT
SPEAKER CONFIGURATION
CENTER
SMALL
NONE
LARGE
FRONT
SMALL
LARGE
REAR
SMALL
LARGE
SUB
ON
OFF
DIGITAL SURROUND SOUND
PROCESSOR
MODEL NO. RSP-975
POWER CONSUMPTION: 22W
RSP-975
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS:
RISQUE DE CHOC ELECTRIQUE–NE PAS OUVRIR
SWITCHED 800W MAX
LDRF OPTICAL
COAXIAL
COAX 1
COAX 2
DVD
5.1 CH
WARNING:
TO REDUCE THE RISK OF FIRE
OR ELECTRICAL SHOCK, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR MOISTURE.
IN OUT
OUTPUTINPUT
FRONT REAR
CENTER
SUBWOOFER
L
R
DTS DECODER
MODEL NO. RDA-985
POWER CONSUMPTION: 10W
RDA-985
IN
OPTI COAX
DIGITAL
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS:
RISQUE DE CHOC ELECTRIQUE–NE PAS OUVRIR
S-VIDEO
COMPOSITE
LEFT
RIGHT
VIDEO OUTPUTAUDIO OUTPUT
DIGITAL
OUT
DVD PLAYER
ROTEL RDA-985 DTS DECODER
SURROUND SOUND PROCESSOR
DTS DECODER RDA-985
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Figure 2 – Wiring Connections with Second Decoder
5.1 CH
WARNING:
TO REDUCE THE RISK OF FIRE
OR ELECTRICAL SHOCK, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR MOISTURE.
IN OUT
OUTPUTINPUT
FRONT REAR
CENTER
SUBWOOFER
L
R
DTS DECODER
MODEL NO. RDA-985
POWER CONSUMPTION: 10W
RDA-985
IN
OPTI COAX
DIGITAL
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS:
RISQUE DE CHOC ELECTRIQUE–NE PAS OUVRIR
S-VIDEO
COMPOSITE
LEFT
RIGHT
VIDEO OUTPUTAUDIO OUTPUT
DIGITAL
OUT
DVD PLAYER
5.1 CH
IN OUT
OUTPUT
FRONT REAR
CENTER
SUBWOOFER
L
R
IN
OPTI COAX
DIGITAL
SURROUND SOUND PROCESSOR
MODEL NO. RSP-980
POWER CONSUMPTION: 22W
RSP-980
1
VIDEO
23
TUNER
DBS LD
5.1 CH INPUT
WARNING:
TO REDUCE THE RISK OF FIRE
OR ELECTRICAL SHOCK, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS:
RISQUE DE CHOC ELECTRIQUE–NE PAS OUVRIR
SURROUND HI-PASS FRONT HI-PASS
OFF ON OFF ON NORMAL WIDE
NORMAL LARGE/THX
CENTER MODE
PHANTOM
NONE
CENTER SPEAKER
AUDIO
PREOUT
TV MONITOR
OUTPUT
OUTPUTINPUT S-VIDEO INPUT S-VIDEO OUTPUT
VIDEO 3
RCA
OUT
SC
123123
TUNER
DBS
LD
CD 1
VIDEO
23
CS
TAPE MONITOR
IN OUT
ZONE 2
OUT
FRONT REAR CENTER
SUBWOOFER
REMOTE EXT
IN OUT
VIDEO
L
R
SWITCHED
500W MAX
POWER
ROTEL RDA-985 DTS DECODER
SURROUND SOUND PROCESSOR
DOLBY DIGITAL DECODER
2
RDA-985
A Few Precautions
Please read this manual carefully. In addition to installation and
operating instructions, it provides valuable information on various
RDA-985 system configurations as well as general information
that will help you get optimum performance from your system.
Please contact your authorized Rotel retailer for answers to any
questions you might have. In addition, all of us at Rotel welcome
your questions and comments.
Save the RDA-985 shipping carton and all enclosed packing material for future use. Shipping or moving the RDA-985 in anything
other than the original packing material may result in severe damage that is not covered by the warranty. Be sure to keep the original sales receipt. It is your best record of the date of purchase,
which you will need in the event warranty service is required.
Placement
Use common sense when placing the RDA-985 in a cabinet or
when stacking other equipment. Make sure that the shelf or cabinet can support its weight. Do not stack heavy components on top
of the RDA-985. Avoid placing the unit where it may be subject to
excessive heat such as on top of a large power amplifier or near a
heat register. For best performance, avoid placing the unit where
it may be subject to vibration, such as near a speaker.
○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
AC Power and Control
AC Power Input
12
Your RDA-985 is configured for the proper AC voltage in the country where you purchased it (either 115 volts or 230/240 volts). The
AC line configuration is noted on a decal on the back panel.
Note: Should you move your unit to another country, it may be
possible to reconfigure it for use on a different line voltage. Do not
attempt to perform this conversion yourself. Opening the enclosure of the RDA-985 exposes you to dangerous voltages. Consult a
qualified service person or the Rotel factory service department
for information.
The RDA-985 should be plugged directly into a 2-pin polarized wall
outlet or into the switched outlet on another component in your
audio system. Do not use an extension cord.
Be sure the power switch on the front panel of the RDA-985 is
turned off. Then, connect the supplied power cord to the AC
power receptacle on the rear of the unit and the AC power outlet.
If you are going to be away from home for an extended period of
time such as a month-long vacation, it is a sensible precaution to
unplug your RDA-985 (as well as other audio and video components) while you are away.
○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Contents
Getting Started ______________________________________ 3
A Few Precautions 3
Placement 3
AC Power and Control ________________________________ 3
AC Power Input
12
3
Power Switch
1
and Power Indicator
2
4
Digital Signal Connections ____________________________ 4
Digital Inputs
5
and
7
4
Digital Input Selector Switch
6
4
Coaxial Digital Output
8
4
DTS Indicator
3
and Signal Indicator
4
4
Analog Signal Connections ___________________________ 4
25-pin Analog Output
10
4
RCA Analog Outputs
11
4
25-pin Analog Input
9
4
Specifications ________________________________________ 5
○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Getting Started
Thank you for purchasing the Rotel RDA-985 DTS® Decoder. The
RDA-985 is a high-quality outboard digital processor for decoding
discrete DTS 5.1 channel surround sound encoded Laser Discs
and Digital Video Discs. The RDA-985 accepts an encoded DTS
digital signal, decodes it, and sends six discrete analog surround
sound audio signals to the 5.1 channel input on a surround sound
processor or other system controller. With its premium components, Balanced Design, and robust construction, the RDA-985 will
provide years of enjoyment in your audio/video system.
The RDA-985 is simple to operate. Other than a power switch,
there are no front panel controls or switches. The unit senses
when a DTS signal is present and engages the decoding circuitry
automatically.
The RDA-985 also provides pass-through digital outputs and analog inputs to provide full flexibility in a number of system configurations. For example, a second outboard decoder (such as Dolby
Digital) can be connected to the analog inputs of the RDA-985.
When a DTS signal is present at the digital input, the RDA-985 will
decode it and send the signal to the outputs. When no DTS signal
is present, the RDA-985 will pass the signal from the analog inputs
to the outputs.
3
DTS DECODER RDA-985
Power Switch 1 and Power Indicator
2
The power switch is located on the front panel of your RDA-985
digital decoder. To turn the unit on, push the switch in. The LED indicator above the switch will light, indicating that the unit is
turned on. To turn the RDA-985 off, push the button again and return it to the out position.
○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Digital Signal Connections
The RDA-985 features two standard digital inputs (optical or coaxial) which receive a digital data stream from a DTS-compatible
LaserDisc or DVD player. In addition, a pass-through digital output
connector (coaxial) can be used to send the raw digital data
stream to another processor, such as a Dolby Digital
®
decoder.
Digital Inputs 5 and
7
The RDA-985’s digital inputs accept a digital signal from your
LaserDisc or DVD player. Two types of digital inputs are available
– an optical input connection and a 75 ohm coaxial input connection. Select the type of connection that best matches the output
connector on your video disc player or other source component,
using either a standard optical digital cable or a standard 75 ohm
coax digital cable.
Digital Input Selector Switch
6
A two-position switch located between the digital inputs selects
the appropriate digital input connector, either optical or coax. If
you connect your video disc player to the RDA-985’s optical input,
place this switch in the left position (labeled OPTI). If you use the
coax input, slide this switch to the right position (labeled COAX).
Coaxial Digital Output
8
The digital output connector is used to pass the unprocessed digital signal from the digital input through to another processor. For
example, the same DVD player might be used to play both DTS encoded and Dolby Digital encoded surround sound material. A DTS
encoded signal will be decoded by the RDA-985 and the resulting
5.1 channel analog signal sent to the surround sound processor. A
Dolby Digital encoded signal will be sent, unprocessed, from the
digital output to the digital input of a Dolby Digital decoder for processing. This pass-through feature allows you to use the RDA-985
with an outboard Dolby Digital decoder or with a surround sound
processor that includes built-in Dolby Digital decoding.
Connect the digital output connector to the digital input connector
on your Dolby Digital decoder or directly to your surround sound
processor’s digital input, if it has built-in Dolby Digital decoding.
DTS Indicator 3 and Signal Indicator
4
There are two LED indicators on the RDA-985 front panel which
indicate whether a signal is present at the digital input. The SIGNAL indicator lights whenever a digital signal from a source component is sensed by the digital inputs. The DTS indicator lights if
that digital signal is DTS encoded.
○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Analog Signal Connections
The RDA-985 has 5.1 channel analog output connections for sending decoded DTS information (six discrete channels: left front,
right front, center, left rear, right rear, and subwoofer) to the surround processor or system controller. In addition, the RDA-985
features a 5.1 channel analog pass-through input, which can be
used to accept a decoded 5.1 channel signal from another outboard decoder, such as Dolby Digital, to the surround processor,
thus simplifying connections in an elaborate system.
25-pin Analog Output
10
The most convenient analog output connection is the rear panel
25-pin connector. This is a standard DB-25 connector which carries all six channels of decoded analog signal in a single cable. If
you are using a surround processor which has a matching DB-25
input, such as all Rotel surround processors, this will provide a
convenient, simplified output connection. Simply connect the output to the matching 5.1 channel input on your surround processor
using a standard female-to-male DB-25 audio connector.
RCA Analog Outputs
11
The RDA-985 also provides six RCA output connectors for use with
surround sound processors lacking a DB-25 input. These outputs
provide exactly the same analog output signals as the DB-25 output, except that connecting them requires the use of six standard
RCA-to-RCA audio cables. If you use the RCA outputs, make sure
that you connect the signal properly – the LEFT FRONT output on
the RDA-985 to LEFT FRONT input on the surround processor, etc.
25-pin Analog Input
9
In many systems, the RDA-985 will be the only outboard surround
sound decoder; therefore, the only input connection will be connecting a DTS source component to the digital inputs described
above. However, elaborate systems may use two outboard decoders (the RDA-985 for DTS signals and a separate Dolby Digital decoder). To simplify the wiring of such a system, the RDA-985
provides a 25-pin 5.1 channel analog input. This accepts the decoded output of a Dolby Digital decoder and passes it through, unchanged, to the analog output of the RDA-985 to be sent on to the
surround processor. The RDA-985 does not have to be turned on
for this pass-through connection to work.
Switching between the digital input and the pass-through analog
input is completely automatic, with the digital input receiving priority. If a DTS signal is present at the digital inputs, the unit decodes the DTS signal and sends the discrete analog signal to the
RDA-985 outputs. If no DTS signal is sensed at the digital inputs,
the signal at the analog inputs is passed through to the outputs.
Note: If you have a DTS signal at the digital inputs and an analog
signal at the analog inputs, the DTS signal will take priority. To
switch to the analog signal, put the DTS source component in its
PAUSE or STOP mode.
4
RDA-985
5
○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Specifications
Total Harmonic Distortion (front, 1 KHz) < 0.03%
Frequency Response (± 1 dB) 15Hz-20kHz
Analog Inputs 1 DB-25
Digital Inputs 1 coaxial
1 optical
Digital Input Impedance 75 Ohms
Analog Outputs 1 DB-25
6 RCA
Output Impedance 1 KOhms
Power Requirements 115 Volts, 60 Hz or
230 Volts, 50 Hz
Power Consumption 30 Watts
Dimensions (W x H x D) 440 x 73 x 270 mm
173/8 x 27/8 x 105/8"
Weight (net) 5.3 kg, 11.7 lb.
All specifications are accurate at the time of printing.
Rotel reserves the right to make improvements without notice.
Rotel and the Rotel HiFi logo are registered trademarks of The Rotel Co, Ltd., Tokyo, Japan.
DTS is a registered trademark of Digital Theater Systems.
Dolby Digital is a registered trademark of the Dolby Licensing Corporation.
082 OMRDA-985 051298
The Rotel Company, Ltd.
10-10 Shinsen-Cho
Shibuya-Ku
Tokyo 150-0045
Japan
Phone: +81-3-5458-5325
Fax: +81-3-5458-5310
Rotel of America
54 Concord Street
North Reading, MA 01864-2699
USA
Phone: 978-664-3820
Fax: 978-664-4109
Rotel Deutschland
Kleine Heide 12
D-33790 Halle/Westf.
Germany
Phone: 05201-87170
Fax: 05201-73370
RDA-985
DTS DECODER
Loading...