M60
Press with the Best
For Use with the
ROSINBOMB M60
Owner’s Guide
www.rosinbomb.com
August 2019
TABLE OF CONTENTS
About Your ROSINBOMB M60
Important Safeguards
Operation
Advanced Settings Operation
Base Settings Operation
Frequently Asked Questions
Quick Tips
Service & Warranty
3
4
5
6-7
8
9
10
11
page 2
ROSINBOMB M60
Thank you for choosing the ROSINBOMB M60 Rosin Press with
patent-pending Flow Channel Technology. The M60’s custom plates
are specially designed with a non-stick surface made with a U.S.
FDA-approved food grade, diamond hard coating. Your press is
constructed of stainless-steel parts and integrated with a temperature adjustable press plate platform to move your rosin quickly from
the press plate surface to your product collection tray. The new M60
design is a watershed change in pressing technology because it
allows for continuous, rapid press production with no stopping for
paper scraping required. The non-stop ow of rosin is self-gathering
in non-stick FDA food grade collection trays for easy clean up at the
end of your press cycle.
Your M60 press is plug and play out of the box. It is capable of
pressing over 6,000 pounds of pressure with one button touch operation. At approximately 60 pounds weight, your M60 Resin Press is
portable measuring only 18 inches in height, 9 inches in width, and
9 inches in depth. The press can process up to 15 grams of material
per press.
Your new M60 press machine runs from an electric outlet of 110
volts or 220 volts (if equipped). The motor draws 6.5 amperes during
press and cycles at 60 Hz per second (speed of press ram). You
may press up to 15 grams of material in a single press event. To
achieve the best experience with your new M60 Resin Press, please
read the accompanying product manual information thoroughly.
Operation requires minimal training and maintenance.
Good pressing!!
Team ROSINBOMB
page 3
IMPORTANT SAFEGUARDS
• Read all instruction before using
your press.
• Do not touch hot surfaces. Do not let
the cord touch hot surfaces.
• Do not immerse the machine in
water or other liquids.
• Close supervision required if the
machine is operated in the presence
of children.
• Do not use your appliance for other
than intended use.
• Remove plug from the wall outlet to
turn off your press. Do not leave the
press running when not in use.
• Keep 6 inches clear from the wall
and on all sides when in use.
• Cool your press completely before
cleaning.
• This appliance is intended for
household use only.
• There are no serviceable parts
inside. Do not attempt to service
this product or your warranty will be
voided.
• Note: some counter-tops and
table surfaces are not designed
to withstand heat. Choose your
surface wisely and ensure its stable
and appropriate for pressing.
Your ROSINBOMB M60 is plug and play out of the box.
Before using the press, remove all packaging components and
read the operating instructions.
page 4
Loading...