Rosen Aviation 8403 Technical Manual

SlimLine

ELECTRONIC

REVISION

CONTROLLED

Model Number

8.4

DISPLAY

8403

www.

rosenaviation

.com

Document # 9003323 Rev D

CORPORATE OFFICE

1020 Owen Loop South
Eugene, OR 97402
1-888-668-4955
Fax [phone]

8403

Compliant to DO-160D

www.

rosenaviation

.com

Table of Contents

ELECTRONIC

REVISION

CONTROLLED

Introduction and Display Overview ...................3

Pinouts and Installation Guidelines ...................4

Operation ..............................................................5

Technician Mode ................................................11

Troubleshooting ................................................ 13

Technical Support .............................................14

Specifi cations ....................................................15

Disclaimer ..........................................................16

8.4” SlimLine IV Page 1

1020 Owen Loop South

Eugene OR 97402

541-342-3802

www.rosenaviation.com

Introduction and Display Overview

Introduction and Display Overview

Welcome to the 8403 Technical Manual for the 8.4” SlimLine
IV display. This manual provides information for the following:

• Pinouts and Installation

• Operation

• Technician Mode

• Troubleshooting

• Specifi cations

The 8403 base model includes the following features:

• Two Year Warranty

• 8.4” Diagonal Screen

• 450 NIT Brightness

• 8.6” (W) x 7.22” (H) x 1.38” (D)

• Brightness, Contrast, Color, and Tint Adjustments

• NTSC/PAL/SECAM/RS170 (B&W) Video Standards

• 640 x 480 Screen Resolution (VGA )

• On Screen Display (OSD) Functions

• Status LED

• 28 Volt DC Power Operation

• Front Panel Menu Operation

8.4” SlimLine IV Page 3

Pinouts and Installation Guidelines

Pinouts and Installation Guidelines

Pinouts

Warning!

This Display is for Entertainment

To obtain pinout information, download our engineering
Outline & Installation drawing from www.rosenaviation.com.

Once you access the home page, click on Support &

Documentation, and then click on Technical Drawings
& Pinouts. Search options include searching by model

number or browsing by category.
Pinout descriptions are provided to assist in the wiring

process. Pay close attention to the pinout information while
completing wiring connections.

Installation Guidelines

Purposes Only! Connect to the Non-

Critical Power Bus.

Handling Warning!

Touching the LCD with excessive force

may leave pressure spots that show in

video display. Handle with care.

To obtain product dimensions and/or rotation information,
download our engineering Outline & Installation drawing
from www.rosenaviation.com.

Once you access the home page, click on Support &

Documentation, and then click on Technical Drawings
& Pinouts. Search options include searching by model

number or browsing by category.
Drawings are provided to assist in the installation process.

Pay close attention to dimensions and rotations when
considering installation requirements.

Page 4 Rosen Aviation

Operation

Operation

Ensure that when plugging the arm into the base receptacle,
the set screw in the base follows the arm’s keyed slot and
the connection is not forced.

Round Style Plug-In:

Slot

Set Screw

Rectangular Style Plug-In:

Ensure that when plugging the
arm into the base receptacle,
the arm’s slot faces toward the
release button (as shown) and
the connection is not forced.

Use the buttons on your 8.4” display to control screen setup
and choose between video source options.

Buttons and screen options are defi ned in this section on
page 6.

Installing/Removing SlimLine Arm Assemblies

To install or remove a SlimLine arm assembly, press in the
arm button all the way.

To release a SlimLine locking arm feature so that it rotates,
press in the arm button only half way.

8.4” SlimLine IV Page 5

Arm Button