Rosen Aviation 7001 Technical Manual
DISPLAY
WideScreen
ELECTRONIC
REVISION
CONTROLLED
Model Number
7
DISPLAY
7001
www.
rosenaviation
.com
Document # 9002424 Rev C
CORPORATE OFFICEOEM SALES / DEALER & OPERATOR SALES
1020 Owen Loop South
Eugene, OR 97402
1-888-668-4955
Fax (541) 342-4912
1121 Warren Ave, Suite 240
Downers Grove, IL 60515
1-800-859-5058
Fax (630) 963-4405
9002424
7001
Compliant to DO-160D
www.
rosenaviation
.com
Table of Contents
Introduction and Display Overview ...................3
Pinouts and Installation Guidelines ...................4
Operation ..............................................................5
Maintenance ......................................................10
Troubleshooting ................................................ 14
Specifi cations ....................................................15
7” DO-160D Compliance Matrix .................................16
Technical Support .............................................15
Disclaimer ..........................................................17
7” Sidewall WideScreen LCD Page 1
1020 Owen Loop South
Eugene OR 97402
541-342-3802
www.rosenaviation.com
Introduction and Display Overview
Introduction and Display Overview
Welcome to the 7001 series Technical Manual. This manual
provides an overview of display details including:
• Pinouts
• Installation
• Operation
• Troubleshooting
• Specifi cations
The 7001 model includes the following features:
• 7” Diagonal Viewing Area
• NTSC
• 480 x 234 Screen Resolution
• 28 Volt Power Supply
• 16x9 Aspect Ratio
• DO160D Compliant
• Optional Select Switch
This monitor has front panel buttons as its only control
method.
7” Sidewall WideScreen LCD Page 3
Pinouts and Installation Guidelines
Pinouts
Warning!
This Display is for Entertainment
Purposes Only! Connect to the Non-
Critical Power Bus.
To obtain pinout information, download our engineering
Outline & Installation drawing from:
www.rosenaviation.com.
Once you access the home page, click on Support &
Documentation, and then click on Technical Drawings
& Pinouts. Search options include searching by model
number or browsing by category.
Pinout descriptions are provided to assist in the wiring
process. Pay close attention to the pinout information while
completing wiring connections.
Installation Guidelines
Handling Warning!
Touching the LCD with excessive force
may leave pressure spots that show in
video display. Handle with care.
To obtain product dimensions and/or rotation information,
download our engineering Outline & Installation drawing
from www.rosenaviation.com.
Once you access the home page, click on Support &
Documentation, and then click on Technical Drawings
& Pinouts. Search options include searching by model
number or browsing by category.
Drawings are provided to assist in the installation process.
Pay close attention to dimensions and rotations when
considering installation requirements.
Page 4 Rosen Aviation
Operation
Select
switch
(optional)
Power On/Off:
Brightness Down
Brightness Up
Scaling
LED
Operation
Power
Pressing this button switches the display
between “on” and “standby” mode. The
LED indicator is red when the display is in
standby, and green when the display is on.
Previously adjusted settings of brightness
and scaling mode are retained in memory
when power is turned off, or when aircraft
power is removed.
Brightness:
Pressing the brightness up or down buttons
will increase or decrease the backlight
brightness in 16 steps. If the button is
held down for more than one second the
brightness will continue to step up or down
in ¼ second intervals.
7” Sidewall WideScreen LCD Page 5
Loading...