Rosen Aviation 6500 Technical Manual
DISPLAY
SlimLine
ELECTRONIC
REVISION
CONTROLLED
ELECTRONIC
REVISION
CONTROLLED
Model Number
6.5
DISPLAY
6500
www.
rosenaviation
.com
Document # 9002751 Rev G
CORPORATE OFFICE
1020 Owen Loop South
Eugene, OR 97402
1-888-668-4955
Fax (541) 342-4912
6500
Compliant to DO-160D
www.
rosenaviation
.com
Table of Contents
ELECTRONIC
REVISION
CONTROLLED
Introduction and Display Overview ...................3
Pinouts .................................................................4
Installation Guidelines ........................................4
Operation ..............................................................5
Technician Mode................................................11
Troubleshooting ................................................ 13
Technical Support .............................................14
Specifi cations ....................................................15
Disclaimer ..........................................................16
6.5” SlimLine LCD Page 1
1020 Owen Loop South
Eugene OR 97402
541-342-3802
www.rosenaviation.com
Introduction and Display Overview
Introduction and Display Overview
Welcome to the 6500 Technical Manual for the 6.5” LCD
display. This manual provides information for the following:
• Pinouts
• Installation
• Operation
• Technician Mode
• Troubleshooting
• Specifi cations
The 6500 base model includes the following features:
• Two Year Warranty
• 6.5” Diagonal Screen
• 400 NIT Brightness
• 6.91” (W) x 5.90” (H) x 1.18” (D)
• Brightness, Hue, Saturation, and Contrast
Adjustments
• NTSC/PAL/SECAM/RS170 (B&W) Video Standards
• 640 x 480 Screen Resolution (VGA )
• On Screen Display (OSD) Functions
• Status LED
• 12 or 28 Volt DC Power Operation
• Front Panel Menu Operation
The 6500 series monitor offers the following options:
• Center, Right, Left Mount Arm with Plug-in® Mini-
Base Receptacle
• Video Source Select Switch
• Pogo Pin Plug and Base Assemblies
6.5” SlimLine LCD Page 3
Pinouts and Installation Guidelines
Pinouts
Warning!
This Display is for Entertainment
To obtain pinout information, download our engineering
Outline & Installation drawing from:
www.rosenaviation.com.
Once you access the home page, click on Support &
Documentation, and then click on Technical Drawings
& Pinouts. Search options include searching by model
number or browsing by category.
Pinout descriptions are provided to assist in the wiring
process. Pay close attention to the pinout information while
completing wiring connections.
Installation Guidelines
Purposes Only! Connect to the Non-
Critical Power Bus.
Handling Warning!
Touching the LCD with excessive force
may leave pressure spots that show in
video display. Handle with care.
To obtain product dimensions and/or rotation information,
download our engineering Outline & Installation drawing
from www.rosenaviation.com.
Once you access the home page, click on Support &
Documentation, and then click on Technical Drawings
& Pinouts. Search options include searching by model
number or browsing by category.
Drawings are provided to assist in the installation process.
Pay close attention to dimensions and rotations when
considering installation requirements.
Page 4 Rosen Aviation
Operation
Operation
Ensure that when plugging the arm into the base receptacle,
the set screw in the base follows the arm’s keyed slot and
the connection is not forced.
Round Style Plug-In:
Slot
Set Screw
Rectangular Style Plug-In:
Ensure that when plugging the
arm into the base receptacle,
the arm’s slot faces toward the
release button (as shown) and
the connection is not forced.
Use the buttons on your 6.5” Display to control screen setup
and choose between video source options.
Buttons and screen options are defi ned in this section on
page 6.
Installing/Removing SlimLine Arm Assemblies
To install or remove a SlimLine arm assembly, press in the
arm button all the way.
To release a SlimLine locking arm feature so that it rotates,
press in the arm button only half way.
6.5” SlimLine LCD Page 5
Arm Button
Loading...