Fold Down
Model Number
17
DISPLAY
1710
www.
rosenaviation
.com
Document # 9003050 Rev C
8 Shackleford Plaza,
Suite 201
Little Rock, AR 72211
1-888-523-7523
Fax (501) 225-1015
CORPORATE OFFICEOEM SALES DEALER & OPERATOR SALES
1020 Owen Loop South
Eugene, OR 97402
1-888-668-4955
Fax (541) 342-4912
1121 Warren Ave, Suite 240
Downers Grove, IL 60515
1-800-859-5058
Fax (630) 963-4405
9003050
1710
Compliant to DO-160D
www.
rosenaviation
.com
Table of Contents
Introduction and Display Overview...................3
Pinouts ................................................................4
Main Interface Connector..............................................4
Optional External Control Connector.............................5
Installation Guidelines........................................6
Operation ..........................................................13
Main Menu .................................................................13
Picture Submenu........................................................14
On Screen Display (OSD) Submenu...........................14
Utility Submenu.......................................................... 15
Auto Submenu ........................................................... 15
Exit Submenu ............................................................ 15
Troubleshooting ............................................... 16
Technical Support ............................................ 17
Specifications ................................................... 18
DO-160 T esting ..........................................................18
Disclaimer .........................................................19
17” Fold Down Page 1
Introduction and Display Overview
Introduction and Display Overview
Welcome to the 1710 T echnical Manual for the 17" Fold Down
LCD Display . This manual provides an overview of display
details including:
• Pinouts
• Installation
• Operation
• Troubleshooting
• Specifications
The 1710 model includes the following features:
• 17" Diagonal Viewing Area
• NTSC / P AL / SECAM / RS-170 (B&W) and RGB
Inputs
• RGB Compatible (VGA-SXGA)
• 1280 x 1024 Screen Resolution (SXGA)
• On Screen Display (OSD) functions
• Picture in Picture (PIP)
• 28 Volt DC Power Operation
The 1710 model accommodates the following optional
controllers (sold separately):
• IR Remote Codes A vailable
• External 7-Button Controller
17” Fold Down Page 3
Pinouts
Pinouts
Pinout descriptions are provided to assist in the wiring
process. Pay close attention to the pinout information while
completing wiring connections.
Warning!
This display is for entertainment
purposes only! Connect to noncritical
power bus.
Main Interface Connector
The input connector on this monitor is a 21WA4 Male Combo
D-subminiature with 17 size 20 contacts (standard density Dsub) and four Size 8 coaxial contacts, mounting in a size 4 Dsubminiature shell. The following table provides detailed pinout
information for the main interface connector.
Mating connector (included): Rosen Connector Kit 0300-030
MATING CONNECT OR LOADING VIEW
Pin Control Signal
1 28V Return
2 +28V
3 N/C
4 N/C
5 N/C
6 RGB/Video Select Switch (TTL)
7 Status Output (TTL)
8 HSync
9 VSync
10 28V Return
11 +28V
12 N/C
Page 4 Rosen Aviation Displays
Main Interface Connector Pinouts Continued:
Pin Control Signal
13 Computer Sync Ground
14 N/C
15 N/C
16 N/C
17 N/C
A1-signal Red
A1-shield Red Return
A2-signal Green
A2-shield Green Return
A3-signal Blue
A3-shield Blue Return
A4-signal Composite Video
A4-shield Composite Video Return
Back Shell Chassis Ground
Optional External Control Connector
Pinouts
The optional external controller interface is a 9-pin standard
density D-subminiature male connector (part number 0300-
402). For permanent installation, connector kit 0300-031 is
required in addition to interface with the external control
connector latch system.
Pin Control Signal
1 Power On/Off
2 Source Select - Locked Out
3 N/C
4Up
5 Down
6 Menu/Select
7 Left
8 Right
9 Ground (Common)
17” Fold Down Page 5