Rosen Aviation 1500-003, 1500-084 Technical Manual
Document Number: 9002429 Rev D
Rosen Aviation 15” SlimLine II Display
Document Number: 9002429 Revision: D
Date: 01/06/09
Template: 4.2-3-6-FM; Revision D; 13 March 2008 Page 2 of 17
Technical Manual, 15” SlimLine II Display
© 2009 by Rosen Aviation, LLC
All Rights Reserved
The information contained herein is proprietary to Rosen Aviation, LLC. No part of this publication
may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
language in any form by any means without written authorization from Rosen Aviation, LLC, except
as allowed under copyright laws.
Disclaimer of Liability
The information contained in this document is subject to change without notice. Because we are
continually improving and adding features to our products, Rosen Aviation, LLC reserves the right
to change specifications without prior notice. Rosen Aviation, LLC shall not be liable for technical or
editorial errors or omissions contained herein.
Rosen Aviation, LLC
1020 Owen Loop South
Eugene, OR 97402
541.342.3802
888.668.4955
Fax: 541.342.4912
www.rosenaviation.com
Rosen Aviation 15” SlimLine II Display
Document Number: 9002429 Revision: D
Date: 01/06/09
Template: 4.2-3-6-FM; Revision D; 13 March 2008 Page 3 of 17
Contents
1. INTRODUCTION AND DISPLAY OVERVIEW ................................................................. 4
1.1. Unpacking .................................................................................................................. 4
2. INSTALLATION GUIDELINES ......................................................................................... 4
2.1. Monitor Diagrams ...................................................................................................... 5
2.2. Cooling and Ventilation .............................................................................................. 6
2.3. Bulkhead Mounting Options ....................................................................................... 6
3. VIDEO CONNECTIONS .................................................................................................... 7
3.1. Bulkhead Main Interface Connector ........................................................................... 7
3.1.1. Bulkhead Main Connector Functions .............................................................................. 8
3.1.2. Center-mount Arm Connector Functions ........................................................................ 9
3.2. Bulkhead External Control (0300-022) ..................................................................... 10
3.3. DIP Switch Option Selection .................................................................................... 10
3.3.1. DIP Switch Function Descriptions ................................ ................................ ................. 10
4. OPERATION ................................................................................................................... 12
4.1. Front Switch Panel Features.................................................................................... 12
4.2. On-Screen Display (OSD) Main Menu ..................................................................... 13
4.3. Picture Submenu ..................................................................................................... 13
4.4. OSD Submenu......................................................................................................... 14
4.5. Utility Submenu ........................................................................................................ 14
4.6. Auto Submenu ......................................................................................................... 14
4.7. Exit Submenu .......................................................................................................... 14
5. HOT KEYS ................................................................................................ ...................... 14
6. TECHNICAL REFERENCES AND SUPPORT ............................................................... 15
7. DO-160D QUALIFICATIONS .......................................................................................... 16
7.1. Bulkhead Specifications ........................................................................................... 17
7.2. Center-mount Arm Specifications ............................................................................ 17
8. REVISION HISTORY ...................................................................................................... 17
Rosen Aviation 15” SlimLine II Display
Document Number: 9002429 Revision: D
Date: 01/06/09
Template: 4.2-3-6-FM; Revision D; 13 March 2008 Page 4 of 17
For help with Outline & Installation drawings, please contact
Rosen Aviation Customer Service at (541) 342-3802.
Touching the LCD with excessive force may leave pressure spots
that show in video display. Handle with care.
1. INTRODUCTION AND DISPLAY OVERVIEW
This manual describes how to install the Rosen 15” SlimLine II bulkhead and center-mount arm
displays onto your aircraft. It contains everything you need to know to wire the display and
confirm that it is functioning correctly.
Note: Only trained and qualified personnel should perform installation and service.
1.1. Unpacking
Parts shipped with the 15” SlimLine Display:
Outline & Installation Drawing
15” SlimLine Display
Bulkhead Main Interface Connector Kit (P/N 0300-021)
The center-mount arm RNVAP base receptacle (P/N 0100-020) is sold separately.
Optional controller sold separately:
External 7-button Controller (P/N 0300-402) shipped with Remote Controller
Technical Information (P/N 100434).
Universal Color Remote (P/N 0500-015)
2. INSTALLATION GUIDELINES
There are several ways to connect the 15” SlimLine II Display to an aircraft’s entertainment
system.
Use the pinout descriptions on page 2 of the Outline & Installation drawing to assist in the wiring
process. Pay close attention to the pinout information while completing wiring connections.
Note: This display is for entertainment purposes only; connect to the non-critical power bus.
Once you access the home page, click on ProductsDisplays15 In SlimLine. Select a
drawing by model number from the drop-down menu in the middle of the page.
Drawings are provided to assist in the installation process. Pay close attention to dimensions and
rotations when considering installation requirements.
Rosen Aviation 15” SlimLine II Display
Document Number: 9002429 Revision: D
Date: 01/06/09
Template: 4.2-3-6-FM; Revision D; 13 March 2008 Page 5 of 17
2.1. Monitor Diagrams
Figure 1 1500 Bulkhead outline dimensions (inches)
Figure 2 1500 Center-mount Arm outline dimensions (inches)
Rosen Aviation 15” SlimLine II Display
Document Number: 9002429 Revision: D
Date: 01/06/09
Template: 4.2-3-6-FM; Revision D; 13 March 2008 Page 6 of 17
2.2. Cooling and Ventilation
The display is cooled by the flow of air, or natural convection. Special care must be taken with
the installation to provide a proper environment for air flow.
Monitor vents: The unit is designed with vent openings on the top, bottom, and rear
surfaces. The entire top vent, and either the entire bottom or entire rear vent must be
unobstructed for a minimum of one (1) inch. The vents must also be ducted to free
air.
Ducting: The installation must provide for an inlet duct (at bottom or rear), and an
exhaust duct at the top. Each of these ducts must have a minimum of four (4) square
inches of cross-sectional area.
Note: Display backlight will shut down if internal temperature reaches 140° F.
Note: Each mounting hole includes a 10-32 screw. To install the display, remove only the
screws that will be used to install the display. Do not remove the 4-40 flathead screws.
2.3. Bulkhead Mounting Options
The bulkhead display can be mounted using all mounting holes on rear surface or from any
combination of two sides.
(Dimensions in inches)
Figure 2 Top view with mounting holes
Figure 3 Bottom view with mounting holes
Loading...