Rosen Aviation 0300-412 User Manual

ELECTRONIC REVISION

CONTROLLED

Document Number 100853

Rev D

Rosen Aviation RosenView Briefing Controller

Document Number: 100853

Revision: D
Date: 01/06/14

Template: 4.4.1.6FM2; Revision A; 12/06/12

Page 2 of 11

Technical Manual, RosenView® Briefing Controller

© 2007–2014 by Rosen Aviation, LLC

All Rights Reserved
The information contained herein is proprietary to Rosen Aviation, LLC. No part of this publication

may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
language in any form by any means without the written authorization from Rosen Aviation, LLC,
except as allowed under copyright laws.

Trademark

RosenView is a registered trademark of Rosen Aviation, LLC.

Disclaimer of Liability

The information contained in this document is subject to change without notice. Because we are
continuously improving and adding features to our products, Rosen Aviation, LLC reserves the right
to change specifications without prior notice. Rosen Aviation, LLC shall not be liable for technical or
editorial errors or omissions contained herein.

Rosen Aviation, LLC
1020 Owen Loop South
Eugene, OR 97402

541.342.3802

888.668.4955
Fax: [phone]

www.rosenaviation.com

Rosen Aviation RosenView Briefing Controller

Document Number: 100853

Revision: D
Date: 01/06/14

Template: 4.4.1.6FM2; Revision A; 12/06/12

Page 3 of 11

Contents

1. INTRODUCTION .................................................................................................................4

1.1. Unpacking .....................................................................................................................4

1.2. Additional Product Information ......................................................................................4

2. INSTALLATION DESCRIPTION .........................................................................................4

2.1. Interface Connectors ....................................................................................................5

2.2. RS-485 Data Bus Method Wiring Diagram ...................................................................5

2.3. RS-232 Data Bus Method Wiring Diagram ...................................................................6

2.4. Confirming Performance ...............................................................................................7

2.4.1. Controller Setup Menu ...................................................................................................... 8

3. TECHNICAL REFERENCES AND SUPPORT ...................................................................9

3.1. Troubleshooting ............................................................................................................9

3.2. Customer Support .........................................................................................................9

3.3. DO-160E Qualifications .............................................................................................. 10

3.4. Specifications .............................................................................................................. 10

4. DEFINITIONS ................................................................................................ .................... 10

5. REVISION HISTORY ........................................................................................................ 11

Rosen Aviation RosenView Briefing Controller

Document Number: 100853

Revision: D
Date: 01/06/14

Template: 4.4.1.6FM2; Revision A; 12/06/12

Page 4 of 11

1. INTRODUCTION

This manual describes how to install the RosenView® Briefing Controller with your RosenView® LX
or RosenView® MX (RosenView LX/MX) system onto your aircraft. It contains everything you need
to know to wire the system and confirm that it is functioning correctly.

Note: Only trained and qualified personnel should perform Installation and service.

1.1. Unpacking

Parts shipped with the RosenView Briefing Controller

 Connector Kit (P/N 0300-022)
 RosenView Briefing Controller Assembly

1.2. Additional Product Information

Product documentation and downloads for the RosenView Briefing Controller are available on
the HURosen AviationUH website.

 Outline and Installation Drawing (P/N 0300-412-CD)
 RosenView Briefing Controller User’s Guide (P/N 100825)

Related drawings for the cabin information systems:

 RosenView LX Outline and Installation Drawing (P/N 0603-001-CD)
 RosenView MX Outline and Installation Drawing (P/N 0603-003-CD)

2. INSTALLATION DESCRIPTION

The RosenView Briefing Controller uses either RS-485 or RS-232 serial data buses to
communicate with the RosenView LX/MX main unit. It will not work with both buses at the same
time.

The data bus method you use depends upon the configuration of your RosenView LX/MX
installation. If the RosenView LX/MX is being controlled by a cabin management system using
RS-485, then you will need to connect the briefing controller using the RS-232 data bus method. If
the RosenView LX/MX is not being connected to a cabin management system via RS-485, then
connect the briefing controller using the RS-485 data bus method. The operation of the
RosenView Briefing Controller is independent of the installation method used.