Rosemount 1159 Product Manual

00809-0100-4504

Product Discontinued

English

June 1999

Rev. AB

Model 1159 Remote
Diaphragm Seals
Manual

With Model 1152, Model 1153 Series B, D, and F, and
Model 1154 Alphaline
Pressure Transmitters

®

Nuclear

IMPOR TANT NOTICE -- ERRATA

Model 1159 Remote Diaphragm Seal, Product Manual 00809-0100-4504, Rev AB (June 1999)

No. Affected Pages Description of Change

1 Page i

Page ii
Back cover page

Replace address and phone/fax with:
Rosemount Nuclear Instruments, Inc.
8200 Market Boulevard
Chanhassen, MN 55317 USA
Tel: [phone]
Fax: [phone]

Effect.

Date

10/10/03

Product Manual

Model 1159 Remote
Diaphragm Seals
Manual

With Model 1152, Model 1153 Series B, D, and F, and

®

Model 1154 Alphaline
Pressure Transmitters

Read this manual before working with the product. For personal and system
safety and optimum product performance, make sure you thoroughly
understand the contents before installing, using, or maintaining this product.

For equipment service needs outside the United States, contact the nearest
Rosemount representative.

Within the United States, the North American Response Center is at your
service 24 hours a day and is a single-point contact for all Rosemount
equipment service needs. If at any time you are not sure what to do, have a
question about using the product, or have a service or support request, call
the center toll free at 1-800-654-RSMT (7768). This contact is your fastest
link to quick and complete answers about any Rosemount Group product or
service.

Nuclear

NOTICE

Rosemount Nuclear Instruments, Inc.

12001 Technology Drive
Eden Prairie, MN 55344
Tel [phone]
Telex 4310012
Fax [phone]
© 1999, Rosemount Nuclear Instruments, Inc
http://www.rosemount.com.

Rosemount, the Rosemount logotype, and Alphaline are registered trademarks of Rosemount Inc.
d-Cell is a trademark of Rosemount Inc.
Flexitallic is a trademark of Flexitallic Gasket Co.
D.C. is a registered trademark of Dow Corning Corp.
Swagelok is a registered trademark of Crawford Fitting Co.
Cover Photo: 1159-001AB

Fisher-Rosemount satisfies all obligations coming from legislation
to harmonize product requirements in the European Union.

Rosemount Nuclear Instruments, Inc.
Warranty and Limitations of Remedy

The warranty and limitations of remedy applicable to this Rosemount

equipment are as stated on the reverse of the current Rosemount

quotation and customer acknowledgment forms.

RETURN OF MATERIAL

Authorization for return is required from Rosemount Nuclear Instruments,
Inc. prior to shipment. Contact the Nuclear Instruments Group
(612-828-8252) for details on obtaining Returned Material Authorization
(RMA). Rosemount Nuclear Instruments will not accept any returned
material without Returned Material Authorization. Materials returned
without authorization are subject to return to customer.

Material returned for repair, whether in or out of warranty, should be
shipped prepaid to:

Rosemount Nuclear Instruments, Inc.
12001 Technology Drive
Eden Prairie, MN 55344
USA

IMPORTANT

The Rosemount Model 1159 Remote Diaphragm Seal is designed for
Nuclear Class IE usage, has been tested per IEEE Std 323-1974 and
IEEE Std 344-1975 as defined in the Qualification Test Report D8300151,
and is manufactured to the requirements of NQA-1; 10CFR50, Appendix B
quality assurance programs; and 10CFR Part 21. During qualification
testing, interfaces were defined between the remote seal and its
environment that are essential to meeting IEEE Std 323-1974
requirements. To ensure compliance with 10CFR Part 21, the remote seal
must comply with the requirements herein throughout its installation,
operation, and maintenance. It is incumbent upon the user to ensure that
the Rosemount Nuclear Instruments, Inc.’s component traceability program
is continued throughout the Qualified Life of the remote seal.

In order to maintain the qualified status of the remote seal, the essential
environmental interfaces must not be compromised. Performance of any
operations on the remote seal other than those specifically authorized in
this manual has the potential for compromising an essential environmental
interface. Where the manual uses the terms requirements, mandatory,
must, or required, the instructions so referenced must be carefully
followed. Rosemount Nuclear Instruments, Inc. expressly disclaims all
responsibility and liability for remote seals for which the foregoing has not
been complied with by the user.

Revision Status

Changes from May 1997 to June 1999

Page (Old) Page (New) Changes

Title Title Updated copyright and phone numbers.
Warranty Warranty Added warranty page.

Global Change Removed Rosemount from left facing page header.

TOC TOC Updated TOC to include new sections under Installation; Remote Seal

Handling Considerations and System Installation Procedure.
1-1 1-1 Reworded note.
1-1 1-1 Added one decimal place to metric measures in Figure 1-1.
2-1 2-1 Slightly reworded Length of Capillary section.
2-1 2-1 Slightly reworded note in Static Head Effects section.
3-1 3-1 Added section titled Remote Seal Handling Considerations.
3-1 3-2 Added note to Remote Seal Installation Considerations section on Model 1152

Pressure Transmitter mounting.
3-2 3-2 Added section titled System Installation Procedure.
3-2 3-3 Rounded newton–meter torque specifications to whole numbers in Metal Seal

Installation Procedure.
3-3 3-4 Rounded newton–meter torque specifications to whole numbers in Gasket

Installation Procedure.
3-3 3-4 Added metric equivalents to dimensions in Mounting of Capillary Clamp.
4-1 4-1 Added page reference to step 2 of Gasket/Metal Seal Replacement.
4-1 4-1 Slightly reworded both notes in Gasket/Metal Seal Replacement section.
5-1 to 5-4 5-1 to 5-4 Added metric measures to all tables in Pressure Ranges section.

5-1 to 5-3 Added second note to Model 1152 Ordering Information table, Model 1153

Series B and D Ordering Information table, Model 1153 Series F Ordering

Information table, and Model 1154 Ordering Information table.
5-3 5-3 Added special option section to Model 1159 Ordering Information table.
5-3 5-3 Footnote (3) in Model 1159 Ordering Information table rewritten.
Back Cover Back Cover Changed phone numbers.

NOTE

The above Revision Status list summarizes the changes made. Please refer to both manuals for complete
comparison details.

iii

iv

Table of Contents

Introduction ................................................................................................ 1-1

Performance .............................................................................................. 2-1

Length of Capillary ................................................................................ 2-1

Quality of Fill......................................................................................... 2-1

Static Head Effects ................................................................................ 2-1

Installation .................................................................................................. 3-1

Remote Seal Handling Considerations.................................................. 3-1

Remote Seal Installation Considerations ............................................. 3-1

System Installation Procedure............................................................... 3-2

Metal Seal or Gasket Installation Procedure ....................................... 3-2

Mounting of Capillary Clamps .............................................................. 3-4

Maintenance .............................................................................................. 4-1

Ordering Information ............................................................................... 5-1

Model 1152 Ordering Information......................................................... 5-1

Model 1153 Series B and D Ordering Information ............................... 5-2

Model 1153 Series F Ordering Information .......................................... 5-2

Model 1154 Ordering Information......................................................... 5-3

Model 1159 Ordering Information......................................................... 5-3

Model 1159 Spare Parts Ordering Information .................................... 5-4

v

vi