Rose Displays ULTRAFRAME User Manual

UltraFrame™

12UF100

Parts

Instruction Sheet

Instructions for Hanging

Instructions for Hanging

Step 1

Install wall mounting hangers
between frame rail and backer board (at
top and bottom sides of the frame only).
Line up holes. Fig. 1

Step 2

Place frame in desired position on wall
and locate placement for molly anchors
or wood screws at top and bottom of
frame only. Fig 2

Step 3

Drill holes to accommodate anchors
for drywall or screws for wood. Fig 3

Step 4

Replace frame and screw into wall. Fig 4

Wood Screws or

Molly Anchors

2010SC

16-0016

Figure 1 Figure 2

Figure 3 Figure 4

Wall Mounting

Hangers
06-6067

UltraFrame

Step 5

Open rails, put in poster and
close rails. Fig 5

UltraFrame™ is a trademark of Rose Displays, Ltd. Neither the manufacturer
nor any sales agent may be held liable for injury, loss or damage resulting
from the use of these products. Part #01INSUltraFrame

Incept-4.23.01

Figure 5

35 Congress Street, Salem, MA 01970

Tel# [phone] Fax# [phone]

e-mail:[e-mail]

UltraFrame™

12UF100

Parts

Instruction Sheet

Instructions for Hanging

Instructions for Hanging

Step 1

Install wall mounting hangers
between frame rail and backer board (at
top and bottom sides of the frame only).
Line up holes. Fig. 1

Step 2

Place frame in desired position on wall
and locate placement for molly anchors
or wood screws at top and bottom of
frame only. Fig 2

Step 3

Drill holes to accommodate anchors
for drywall or screws for wood. Fig 3

Step 4

Replace frame and screw into wall. Fig 4

Wood Screws or

Molly Anchors

2010SC

16-0016

Figure 1 Figure 2

Figure 3 Figure 4

Wall Mounting

Hangers

06-6067

UltraFrame

Step 5

Open rails, put in poster and
close rails. Fig 5

Figure 5

UltraFrame™ is a trademark of Rose Displays, Ltd. Neither the manufacturer
nor any sales agent may be held liable for injury, loss or damage resulting from
the use of these products. Part #01INSUltraFrame

Incept-4.23.01