Rose Displays SUPERSNAP with Rod Connector User Manual
SuperSnap™ with Rod Connector
Instruction Sheet
Parts
Cable Clip
06-5050
SuperSnap
12S300
Instructions for assembly
Step 1
Place cable into inner channel of
CableClip. The cable should
snap into place. Fig. 1
Align one end of the CableClip with
the top channel of the plastic holder.
Then insert one round end, press
down on the other round end and
slide CableClip into rail. Fig. 2
Note: Position CableClip about
halfway down each SuperSnap. Fig. 3
Step 2
Push rod halfway into clip rail
of one SuperSnap. Fig. 4
End Caps
06-5475
6” Rod
97-0304-06
Loop & Saucer
16-0018SL
Figure 2Figure 1
Figure 3
Step 3
Insert rod into top clip rail of second
SuperSnap until both holders meet.
Fig. 5 & 6 Repeat steps 2-3 for
additional SuperSnaps.
Page 1 of 2
The SuperSnap™ is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #02INSSuperSnapRodCCLoop
Incept-11.13.02
Figure 4
Figure 5
Figure 6
35 Congress Street, Salem, MA 01970
Tel# 1- 800 631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com
SuperSnap™ with Rod Connector
Instruction Sheet
Parts
Cable Clip
06-5050
SuperSnap
12S300
Instructions for assembly
(continued)
Step 4
Snap all sections of the SuperSnap
open. Fig. 7
Note: It is easier to open and close
the SuperSnap by starting at one
end and working your way down
the holder.
Step 5
Insert poster (top and bottom) into
all sections of SuperSnap. Fig. 8
Step 6
To close, snap the SuperSnap shut.
Fig. 9
Step 7
Push end caps into place. Fig. 10
End Caps
06-5475
Open all
holders
6” Rod
97-0304-06
Loop & Saucer
16-0018SL
Figure 7 Figure 8
Step 8
Suspend holders. Finished Look
Important note:
Please save and reuse the
SuperSnap, End Caps and
CableClips for future projects.
Page 2 of 2
The SuperSnap™ is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #02INSSuperSnapRodCCLoop
Incept-11.13.02
Figure 10Figure 9
Finished Look
35 Congress Street, Salem, MA 01970
Tel# 1- 800 631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com
Loading...