Rose Displays SNAIL ADHESIVE WITH CEILING SLUG User Manual

SSnail Adhesive Disc
and Ceiling Slug
Parts
12-0015
Instructions for Hanging
Instructions for Hanging
25-0080
Step 1
Make sure surface is totally free of any dust or dirt and completely dry. Remove the backing from the disk or slug and apply to the surface with firm pressure. Hold firmly for about 20 seconds.
Step 2
For best results allow the adhesive to cure for at least 30 minutes.
Step 3
You are now ready to hang your signs.
Important note:
Adhesive disc has metal rotating eye to align hook direction if necessary. Both the Snail Adhesive Disc and the Ceiling Slug can be used on tile, plaster ceilings, beams, painted cement or window mullions.
25-0026
25-0024
Suggestion: Use our Regular Hook in varying lengths with the Snail Adhesive Disc. Use the Ceiling Slug with our Gorilla 15 magnet..
Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of this product. Part #99INSSAD INSCS
Incept-2.9.99
Regular
Hooks
Gorilla 15
Magnet
21 Lime Street, Marblehead, MA 01945
Tel# 1- 800 631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com
Loading...