Rose Displays SNAIL ADHESIVE-GENERIC User Manual

Snail Adhesive Disc

Parts

25-0026

Instructions for Hanging

Step 1

Make sure surface is totally free of any dust or dirt and completely dry. Remove the backing from the disk and apply to the surface with firm pressure. Hold firmly for about 20 seconds.

Installation Instructions

Step 2

For best results allow the adhesive to cure for at least 30 minutes.

Step 3

You are now ready to hang your signs.

Important note:

Adhesive disc has metal rotating eye to align hook direction if necessary. The Snail Adhesive Disc can be used on tile, plaster ceilings, beams, painted cement or window mullions.

Note: Snai Adhesive Disk is compatible with a number of various hooks. Follow individual installaton instructions for particular hanging systems.

The Snail Adhesive Disc is a trademark of Rose displays, Ltd. Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of this product. Part #99INSSAD

Incept-8.29.01

35 Congress Street, Salem MA 01970

Tel# 1-800-631-9707 Fax# 1-800-560-2890

e-mail:signware@rosedisplays.com