Rose Displays ROPOLE-OMNI HEAD User Manual

Omni RoPole

Omni RoPole Sign

Hanging Instructions

RoPole

Omni

head

®

Instructions

SIDE HOOKS

To install

1. Assemble sign with clips and top and bottom
holders.

Hook

Clip

Sign

Holder

2. Attach regular hooks (2) to each clip in the top
holder of the sign. Hook them over the side hooks
on the Omni Head (see illustration).

3. Raise the RoPole to the ceiling. Loop the
regular hooks through the previously installed
eye-hooks on the ceiling, one side at a time.

To remove

Simply reverse the steps above.

Please Note

Sign assembly pictured above does not exactly match

signware kit provided. It is important that the metal

sign hanging hook be looped over the Omni head

side hooks for proper installation.

The OneUp and the RoPole are patented and registered trademarks of Rose Displays, Ltd.
Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage
resulting from the use of these products. Part #99 INSOmniRopole

Inception 7/99

35 Congress Street, Salem MA 01970

Tel# [phone] Fax# [phone]

e-mail:[e-mail]