Rose Displays QUICKGRIP WITH WINDOW MOUNTS User Manual

QuickGrip™

Instruction Sheet

Parts

QuickGrip

12-0500

Instructions for Hanging

Step 1

For use with poster paper or thinner
substrates. Score and fold or staple poster
edge and slide into the QuickGrip Holder.
When using staples, place staples 1/4” from
top and bottom edges of poster. Fig. 1

Window

Mounts

20-0038

End Caps

06-5525

or

For use with thicker graphics up to 2mm.
Starting at one corner push the QuickGrip
Holder onto the graphic. Work your way
down the holder tapping it firmly down to
seat the graphic fully. Fig. 2

Step 3

Slide window mounts into the top rail of the
QuickGrip holder. Fig. 3
Place one window mount about 1/3 from each
edge of the holder.

Step 4

Push end caps into place. Fig. 5

Step 5

Suspend poster. Fig. 6

Important note:

Please save and reuse the QuickGrip Holder,
End Caps and Window Mounts for future
projects.

Figure 1

Figure 2

Figure 3

Figure 5Figure 4

QuickGrip is a trademark of Rose Displays, Ltd. Neither the manufacturer
nor any sales agent may be held liable for injury, loss or damage resulting
from the use of these products. Part #02QuickGripWindowMounts

Incept-12.31.02

35 Congress Street, Salem, MA 01970

Tel# [phone] Fax# [phone]

e-mail:[e-mail]

QuickGrip™

Instruction Sheet

Parts

QuickGrip

12-0500

Instructions for Hanging

Step 1

For use with poster paper or thinner
substrates. Score and fold or staple poster
edge and slide into the QuickGrip Holder.
When using staples, place staples 1/4” from
top and bottom edges of poster. Fig. 1

Window

Mounts

20-0038

End Caps

06-5525

or

For use with thicker graphics up to 2mm.
Starting at one corner push the QuickGrip
Holder onto the graphic. Work your way
down the holder tapping it firmly down to
seat the graphic fully. Fig. 2

Step 3

Slide window mounts into the top rail of the
QuickGrip holder. Fig. 3
Place one window mount about 1/3 from each
edge of the holder.

Step 4

Push end caps into place. Fig. 5

Step 5

Suspend poster. Fig. 6

Important note:

Please save and reuse the QuickGrip Holder,
End Caps and Window Mounts for future
projects.

Figure 1

Figure 2

Figure 3

Figure 5Figure 4

QuickGrip is a trademark of Rose Displays, Ltd. Neither the manufacturer
nor any sales agent may be held liable for injury, loss or damage resulting
from the use of these products. Part #02QuickGripWindowMounts

Incept-12.31.02