Rose Displays QUICKGRIP WITH MULTICLIPS User Manual

QuickGrip™

Parts

Instruction Sheet

QuickGrip

12-0500

Instructions for Hanging

Step 1

For use with poster paper or thinner
substrates. Score and fold or staple poster
edge and slide into the QuickGrip Holder.
When using staples, place staples 1/4” from
top and bottom edges of poster. Fig. 1

or

For use with thicker graphics up to 2mm.
Starting at one corner push the QuickGrip
Holder onto the graphic. Work your way
down the holder tapping it firmly down to
seat the graphic fully. Fig. 2

Step 3

Squeeze sides of MultiClip together. Fig. 3
Align the bottom rail of the MultiClip with
the top channel of the plastic holder. Slide
MultiClip into rail. Fig. 4 Repeat step 3
for second MultiClip.

MultiClips

1UP-0101

Figure 3 Figure 4

End Caps

Figure 1

06-5525

Figure 2

Step 4

Push end caps into place. Fig. 5

Step 5

Suspend poster. Fig. 6

Important note:

Please save and reuse the QuickGrip Holder,
End Caps and MultiClips for future projects.

QuickGrip is a trademark of Rose Displays, Ltd. Neither the manufacturer
nor any sales agent may be held liable for injury, loss or damage resulting
from the use of these products. Part #02INSQuickGripMC

Incept-8.5.02

Figure 6Figure 5

35 Congress Street, Salem, MA 01970

Tel# [phone] Fax# [phone]

e-mail:[e-mail]

QuickGrip™

Parts

Instruction Sheet

QuickGrip

12-0500

Instructions for Hanging

Step 1

For use with poster paper or thinner
substrates. Score and fold or staple poster
edge and slide into the QuickGrip Holder.
When using staples, place staples 1/4” from
top and bottom edges of poster. Fig. 1

or

For use with thicker graphics up to 2mm.
Starting at one corner push the QuickGrip
Holder onto the graphic. Work your way
down the holder tapping it firmly down to
seat the graphic fully. Fig. 2

Step 3

Squeeze sides of MultiClip together. Fig. 3
Align the bottom rail of the MultiClip with
the top channel of the plastic holder. Slide
MultiClip into rail. Fig. 4

MultiClip

1UP-0101

End Caps

Figure 1

06-5525

Figure 2

Step 4

Push end caps into place. Fig. 5

Step 5

Suspend poster. Fig. 6

Important note:

Please save and reuse the QuickGrip Holder,
End Caps and MultiClips for future projects.

QuickGrip is a trademark of Rose Displays, Ltd. Neither the manufacturer
nor any sales agent may be held liable for injury, loss or damage resulting
from the use of these products. Part #02INSQuickGripMC

Incept-8.5.02

Figure 3 Figure 4

Figure 6Figure 5

35 Congress Street, Salem, MA 01970

Tel# [phone] Fax# [phone]

e-mail:[e-mail]