Page 1
Gotcha
Parts
®
Instruction Sheet
Gotcha
12G100
Instructions For Hanging
Step 1
Place poster on a flat surface. Snap the Gotcha
Holder open and insert poster (top and bottom).
To close, snap the Gotcha Holder shut. Fig. 1
Note: It is easier to open and close the Gotcha
Holder by starting at one end and working your
way down the holder.
Step 2
Insert OneUp Gotcha Clips into slot on the
backside of the top Gotcha only. (You should hear
a SNAP" when the clips are inserted properly).
Fig. 2
Note: For best results, place the clips 1/3 of the
way in from each end on the top Gotcha Holder.
Fig. 3
OneUp Gotcha Clips
Figure 1
Figure 2
Step 3
Suspend poster.
Important note:
Please save and reuse the Gotcha Holder and the
OneUp Gotcha Clips for future projects.
The Gotcha® is a registered trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products. Part #00INSGO
Incept-1.12.00
Figure 3
35 Congress Street, Salem MA 01970
Tel# 1-800-631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com
Page 2
Gotcha
Parts
®
Instruction Sheet
Gotcha
12G100
Instructions For Hanging
Step 1
Place poster on a flat surface. Snap the Gotcha
Holder open and insert poster (top and bottom).
To close, snap the Gotcha Holder shut. Fig. 1
Note: It is easier to open and close the Gotcha
Holder by starting at one end, and working your
way down the holder.
Step 2
Insert OneUp Gotcha Clips into slot on the
backside of the top Gotcha only. (You should hear
a SNAP" when the clips are inserted properly).
Fig. 2
Note: For best results, place the clips 1/3 of the
way in from each end on the top Gotcha holder.
Fig. 3
OneUp Gotcha Clips
Figure 1
Figure 2
Step 3
Suspend poster.
Important note:
Please save and reuse the Gotcha Holder and the
OneUp Gotcha Clips for future projects.
The Gotcha® is a registered trademark. Neither the manufacturer nor any
sales agent may be held liable for injury, loss or damage resulting from the
use of these products. Part #00INSGO
Incept-1.12.00
Figure 3
Page 3
Gotcha
Parts
®
OneUp® Instruction Sheet
Gotcha
12G100
Instructions for Hanging
Instructions for Hanging
Step 1
Place poster on a flat surface. Snap the Gotcha
Holder open and insert poster (top and bottom).
To close, snap the Gotcha Holder shut. Fig. 1
Note: It is easier to open and close the Gotcha
Holder by starting at one end, and working your
way down the holder.
Step 2
Note: For OneUp applications, the Gotcha
Holder is conveniently marked in the center.
Find the mark and insert the OneUp Gotcha Clip
into slot on the backside of the top Gotcha only.
(You should hear a "SNAP" when the clip is
inserted properly). Fig. 2
OneUp Gotcha Clip
Figure 1
Step 3
Suspend poster.
Important note:
Please save and reuse the Gotcha Holder and the
OneUp Gotcha Clip for future projects.
The Gotcha® is a registered trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products. Part #00INSGO1UP
Incept-1.12.00
Figure 2
35 Congress Street, Salem MA 01970
Tel# 1-800-631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com
Page 4
Gotcha
Parts
®
OneUp® Instruction Sheet
Gotcha
12G100
Instructions for Hanging
Instructions for Hanging
Step 1
Place poster on a flat surface. Snap the Gotcha
Holder open and insert poster (top and bottom).
To close, snap the Gotcha Holder shut. Fig. 1
Note: It is easier to open and close the Gotcha
Holder by starting at one end and working your
way down the holder.
Step 2
Note: For OneUp applications, the Gotcha
Holder is conveniently marked in the center.
Find the mark and insert the OneUp Gotcha Clip
into slot on the backside of the top Gotcha only.
(You should hear a "SNAP" when the clip is
inserted properly). Fig. 2
OneUp Gotcha Clip
Figure 1
Step 3
Suspend poster.
Important note:
Please save and reuse the Gotcha Holder and the
OneUp Gotcha Clip for future projects.
The Gotcha® is a registered trademark. Neither the manufacturer nor any
sales agent may be held liable for injury, loss or damage resulting from the
use of these products. Part #00INSGO1UP
Incept-1.12.00
Figure 2
Loading...