ROSE DISPLAYS GOTCHA WITH GOTCHA CLIPS, GOTCHA Instruction Sheet

Gotcha

Parts

®

Instruction Sheet

Gotcha

12G100

Instructions For Hanging

Step 1

Place poster on a flat surface. Snap the Gotcha
Holder open and insert poster (top and bottom).
To close, snap the Gotcha Holder shut. Fig. 1
Note: It is easier to open and close the Gotcha
Holder by starting at one end and working your
way down the holder.

Step 2

Insert Gotcha Clips into slot on backside of the
top Gotcha Holder only. (You should hear a
"SNAP" when the clips are inserted properly).

Fig. 2

Note: For best results, place the clips 1/3 of the

way in from each end on the top Gotcha Holder.

Gotcha Clips

06-5066

Figure 1

Step 3

Suspend poster.

Important note:

Please save and reuse the Gotcha Holder and
Gotcha Clips for future projects.

The Gotcha® is a registered trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products. Part #99INSGO

Incept-3.1.99

Figure 2

35 Congress Street, Salem MA 01970

Tel# [phone] Fax# [phone]

e-mail:[e-mail]

Gotcha

Parts

®

Instruction Sheet

Gotcha

12G100

Instructions For Hanging

Step 1

Place poster on a flat surface. Snap the Gotcha
Holder open and insert poster (top and bottom).
To close, snap the Gotcha shut. Fig. 1
Note: It is easier to open and close the Gotcha
Holder by starting at one end and working your
way down the holder.

Step 2

Insert Gotcha Clips into slot on backside of the
top Gotcha Holder only. (You should hear a
"SNAP" when the clips are inserted properly).

Fig. 2

Note: For best results, place the clips 1/3 of the

way in from each end on the top Gotcha Holder.

Gotcha Clips

06-5066

Figure 1

Step 3

Suspend poster.

Important note:

Please save and reuse the Gotcha Holder and
Gotcha Clips for future projects.

The Gotcha® is a registered trademark. Neither the manufacturer nor
any sales agent may be held liable for injury, loss or damage resulting from
the use of these products. Part #99INSGOGEN

Incept-3.1.99

Figure 2