Rose displays GOTCHA FOR SLATWALL User Manual

GotchaClip™ For Slatwall

Parts

Instruction Sheet

Gotcha

12G100

Instructions For Hanging

Step 1

Place poster on a flat surface. Snap the Gotcha
Holder open and insert poster (top and bottom).
To close, snap the Gotcha Holder shut. Fig. 1

Note: It is easier to open and close the Gotcha
Holder by starting at one end and working your
way down the holder.

Step 2

Insert the GotchaClip for Slatwall into slot on the
back side of the top Gotcha Holder only. (You
should hear a “SNAP” when the clip is inserted
properly). Fig. 2

Step 3

Tilt holder and clip at a slight angle and slip the
GotchaClip for Slatwall hooks into the groove in
the slatwall. Fig. 3

GotchaClips
for Slatwall

Figure 1

Figure 2

Important note:

Please save and reuse the Gotcha Holder and the
GotchaClip for Slatwall for future projects.

Gotcha® is a registered trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #00INSGotcha/SWClip

Incept-1.12.00

Figure 3

35 Congress Street, Salem MA 01970

Tel# [phone] Fax# [phone]

e-mail:[e-mail]

GotchaClip™ For Slatwall

Parts

Instruction Sheet

Gotcha

12G100

Instructions For Hanging

Step 1

Place poster on a flat surface. Snap the Gotcha
Holder open and insert poster (top and bottom).
To close, snap the Gotcha Holder shut. Fig. 1

Note: It is easier to open and close the Gotcha
Holder by starting at one end and working your
way down the holder.

Step 2

Insert the GotchaClip for Slatwall into the slot on
the back side of the top Gotcha Holder only. (You
should hear a “SNAP” when the clip is inserted
properly). Fig. 2

Step 3

Tilt holder and clip at a slight angle and slip the
GotchaClip for Slatwall hooks into grooves in the
slatwall. Fig. 3

GotchaClips

for Slatwall

Figure 1

Figure 2

Important note:

Please save and reuse the Gotcha Holder and
GotchaClip for Slatwall for future projects.

Gotcha® is a registered trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #00INSGotcha/SWClip

Incept-1.12.00

Figure 3