Rose displays GOTCHA FOR PEGBOARD User Manual

GotchaClip™ for Pegboard

Parts

Instruction Sheet

Gotcha

12G100

Instructions for Hanging

Instructions for Hanging

Instructions for Hanging

Step 1

Place poster on a flat surface. Snap the Gotcha
Holder open and insert poster (top and bottom).
To close, snap the Gotcha Holder shut. Fig. 1

Note: It is easier to open and close the Gotcha
Holder by starting at one end and working your
way down the holder.

Step 2

Insert the GotchaClips into the holes in the peg­board. For best results, place the GotchaClips in
holes separated by a difference equal to half of the
length of Gotcha Holder. ( i.e. If holder is 12” place
clips 6” apart). Fig. 2

Step 3

Push Gotcha onto clips, you will hear a “SNAP”.

Fig. 3

GotchaClips

for Pegboard

Figure 1

Figure 2

Important note:

Please save and reuse the Gotcha Holder and
GotchaClips for future projects.

The Gotcha® is a registered trademark and GotchaClip is a trademark of
Rose Displays, Ltd. Neither the manufacturer nor any sales agent may be
held liable for injury, loss or damage resulting from the use of these
products. Part #00INSGotchaClip/Pegboard

Incept-10.5.00

Figure 3

35 Congress Street, Salem, MA 01970

Tel# [phone] Fax# [phone]

e-mail:[e-mail]

GotchaClip™ for Pegboard

Parts

Instruction Sheet

Gotcha

12G100

Instructions for Hanging

Instructions for Hanging

Instructions for Hanging

Step 1

Place poster on a flat surface. Snap the Gotcha
Holder open and insert poster (top and bottom).
To close, snap the Gotcha Holder shut. Fig. 1

Note: It is easier to open and close the Gotcha
by starting at one end and working your way down
the holder.

Step 2

Insert the GotchaClips into the holes in the
pegboard. For best results, place the GotchaClips
in holes separated by a difference equal to half of
the length of Gotcha Holder. ( i.e. If holder is 12”
place clips 6” apart). Fig. 2

Step 3

Push Gotcha onto clips, you will hear a “SNAP”.

Fig. 3

GotchaClips

for Pegboard

Figure 1

Figure 2

Important note:

Please save and reuse the Gotcha Holder
and GotchaClips for future projects.

The Gotcha is a registered trademark and GotchaChips are a trademark of
Rose Displays, Ltd. Neither the manufacturer nor any sales agent may be
held liable for injury, loss or damage resulting from the use of these
products. Part #00INSGotchaClip/Pegboard

Incept-10.5.00

Figure 3