Roper RGE33081, WGE32301, WGE30302, RGE33301, RGE33001 Owner’s Manual

...

0 (0)

ELECTRICRANGES

oCUISINIERES

ELECTRIQUES

Table of Contents/Table des matieres .................. 2

9754174A

TABLEOFCONTENTS

RANG ESAFETY ............................................................................. 3

The Anti-Tip Bracket .................................................................... 3

PARTS AND FEATURES ................................................................ 6

COOKTOP USE .............................................................................. 7

Cooktop Controls ......................................................................... 7

Simmer Element ........................................................................... 7

Warming Element ......................................................................... 7

Ceramic Glass Use ...................................................................... 8

Fluorescent Cooktop Light .......................................................... 8

Coil Elements and Burner Bowls ................................................. 9

Lift-up Cooktop ............................................................................ 9

Home Canning ............................................................................. 9

Cookware ..................................................................................... 9

ELECTRONIC OVEN CONTROL ................................................. 10

Display ........................................................................................ 10

Clock .......................................................................................... 10

Using the Minute Timer .............................................................. 11

OVEN USE ..................................................................................... 11

Aluminum Foil............................................................................. 11

Positioning Racks and Bakeware .............................................. 11

Broil Pan Storage Rack .............................................................. 12

Bakeware .................................................................................... 12

Oven Vents ................................................................................. 12

Oven Light .................................................................................. 13

Baking and Roasting .................................................................. 13

Broiling ........................................................................................ 13

RANGE CARE ............................................................................... 14

Control Panel Glass ................................................................... t4

Oven Light .................................................................................. 14

Appliance Outlets ....................................................................... 15

Oven Door .................................................................................. 15

Storage Drawer .......................................................................... 15

Sweep-Thru Base ...................................................................... 15

General Cleaning ........................................................................ 16

TROUBLESNOOTING .................................................................. 17

TABLEDESMATIERES

SECURITE DE LA CUlSINIERE ................................................... 18

La bride antibasculement ........................................................... 18

PII_CES ET CARACTI_RISTIOUES .............................................. 21

UTILISATION DE LA TABLE DE CUlSSON ................................ 22

Commandes de la table de cuisson .......................................... 22

elements de mijotage ................................................................. 22

Clement de rechauffage ............................................................. 22

Utilisation de la vitroceramique .................................................. 23

Lumiere fluorescente de la table de cuisson ............................. 24

Elements en spirale et cuvettes des brQleurs ............................ 24

Table de cuisson relevable ......................................................... 24

Preparation de conserves a la maison ....................................... 24

Ustensiles de cuisson ................................................................ 25

COMMANDE I_LECTRONIQUE DU FOUR ................................. 25

Affichage ..................................................................................... 25

Horloge ....................................................................................... 25

Utilisation de la minuterie ........................................................... 26

UTILISATION DU FOUR ............................................................... 26

Papier d'aluminium ..................................................................... 26

Positionnement des grilles et des ustensiles de cuisson .......... 26

Support de rangement de I_chefrite .......................................... 27

Ustensiles de cuisson ................................................................ 27

Events du four ............................................................................ 27

Lumiere du four .......................................................................... 28

Cuisson au four et rGtissage ...................................................... 28

Cuisson au gril ............................................................................ 28

ENTRETIEN DE LA CUISINIERE ................................................. 29

Vitre du tableau de commande .................................................. 29

Lampe du four ............................................................................ 29

Prises pour appareils menagers ................................................ 30

Porte du four ............................................................................... 30

Tiroir de remisage ....................................................................... 30

Base balayable ........................................................................... 30

Nettoyage genGral ...................................................................... 31

DEPANNAGE ................................................................................. 32

RANGESAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all

safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or

"WARNING." These words mean:

You can be killed or seriously injured if you don't

immediately follow instructions.

You can be killed or seriously injured if you don't

follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you

what can happen if the instructions are not followed.

Therange will not tip during normal use.However,the range cantip ifyou apply too much force orweight to the open door without the

anti-tip bracket fastened down properly.

Anti-Tip Bracket

Range Foot

Tip Over Hazard

A child or adult can tip the range and be killed.

Connect anti-tip bracket to rear range foot.

Reconnect the anti-tip bracket, if the range is moved.

See the installation instructions for details.

Failure to follow these instructions can result in death or serious burns to children

and adults.

Making sure the anti-tip bracket is installed:

• Slide range forward.

• Look for the anti-tip bracket securely attached to floor.

• Slide range back so rear range foot is under anti-tip bracket.

iMPORTANT SAFETY iNSTRUCTiONS

WARNING: To reduce the risk of fire, electrical

shock, injuryto persons, or damage when using the

range, follow basic precautions, including the

following:

[] WARNING: TO REDUCE THE RISK OF

TIPPING OF THE RANGE, THE RANGE MUST BE

SECURED BY PROPERLY INSTALLED ANTI-TIP

DEVICES. TO CHECK IF THE DEVICES ARE

INSTALLED PROPERLY, SLIDE RANGE FORWARD,

LOOK FOR ANTI-TIP BRACKET SECURELY

ATTACHED TO FLOOR, AND SLIDE RANGE BACK

SO REAR RANGE FOOT IS UNDER ANTI-TIP

BRACKET.

[] CAUTION: Do not store items of interest to

children in cabinets above a range or on the

backguard of a range - children climbing on the

range to reach items could be seriously injured.

[] Proper Installation - Be sure the range is properly

installed and grounded by a qualified technician.

[] Never Use the Range for Warming or Heating the

Room.

[] Do Not Leave Children Alone - Children should not

be left alone or unattended in area where the range

is in use. They should never be allowed to sit or

stand on any part of the range.

[] Wear Proper Apparel - Loose-fitting or hanging

garments should never be worn while using the

range.

[] User Servicing - Do not repair or replace any part of

the range unless specifically recommended in the

manual. All other servicing should be referred to a

qualified technician.

[] Storage in or on the Range - Flammable materials

should not be stored in an oven or near surface

units.

[] Do Not Use Water on Grease Fires - Smother fire or

flame or use dry chemical or foam-type extinguisher.

[] Use Only Dry Potholders - Moist or damp

potholders on hot surfaces may result in burns from

steam. Do not let potholder touch hot heating

elements. Do not use a towel or other bulky cloth.

[] DO NOT TOUCH SURFACE UNITS OR AREAS

NEAR UNITS - Surface units may be hot even

though they are dark in color. Areas near surface

units may become hot enough to cause burns.

During and after use, do not touch, or let clothing or

other flammable materials contact surface units or

areas near units until they have had sufficient time

to cool. Among those areas are the cooktop and

surfaces facing the cooktop.

[] Use Proper Pan Size - The range is equipped with

one or more surface units of different size. Select

utensils having flat bottoms large enough to cover

the surface unit heating element. The use of

undersized utensils will expose a portion of the

heating element to direct contact and may result in

ignition of clothing. Proper relationship of utensil to

burner will also improve efficiency.

[] Never Leave Surface Units Unattended at High Heat

Settings - Boilover causes smoking and greasy

spillovers that may ignite.

[] Make Sure Reflector Pans or Drip Bowls Are in

Place - Absence of these pans or bowls during

cooking may subject wiring or components

underneath to damage.

[] Protective Liners - Do not use aluminum foil to line

surface unit drip bowls or oven bottoms, except as

suggested in the manual. Improper installation of

these liners may result in a risk of electric shock, or

fire.

[] Glazed Cooking Utensils - Only certain types of

glass, glass/ceramic, ceramic, earthenware, or other

glazed utensils are suitable for range-top service

without breaking due to the sudden change in

temperature.

[] Utensil Handles Should Be Turned Inward and Not

Extend Over Adjacent Surface Units - To reduce the

risk of burns, ignition of flammable materials, and

spillage due to unintentional contact with the utensil,

the handle of a utensil should be positioned so that

it is turned inward, and does not extend over

adjacent surface units.

[] Do Not Soak Removable Heating Elements -

Heating elements should never be immersed in

water.

[] Do Not Cook on Broken Cooktop - If cooktop

should break, cleaning solutions and spillovers may

penetrate the broken cooktop and create a risk of

electric shock. Contact a qualified technician

immediately.

[] Clean Cooktop With Caution - If a wet sponge or

cloth is used to wipe spills on a hot cooking area,

be careful to avoid steam burn. Some cleaners can

produce noxious fumes if applied to a hot surface.

[] Use Care When Opening Door - Let hot air or

steam escape before removing or replacing food.

[] Do Not Heat Unopened Food Containers - Build-up

of pressure may cause container to burst and result

in injury.

SAVE THESE iNSTRUCTiONS

IMPORTANT SAFETY INSTRUCTIONS

• Keep Oven Vent Ducts Unobstructed.

• Placement of Oven Racks - Always place oven

racks in desired location while oven is cool. If rack

must be moved while oven is hot, do not let

potholder contact hot heating element in oven.

• DO NOT TOUCH HEATING ELEMENTS OR

INTERIOR SURFACES OF OVEN - Heating

elements may be hot even though they are dark in

color. Interior surfaces of an oven become hot

enough to cause burns. During and after use, do

not touch, or let clothing or other flammable

materials contact heating elements or interior

surfaces of oven until they have had sufficient time

to cool. Other surfaces of the appliance may

become hot enough to cause burns - among these

surfaces are oven vent openings and surfaces near

these openings, oven doors, and windows of oven

doors.

For self-cleaning ranges -

• Do Not Clean Door Gasket - The door gasket is

essential for a good seal. Care should be taken not

to rub, damage, or move the gasket.

• Do Not Use Oven Cleaners - No commercial oven

cleaner or oven liner protective coating of any kind

should be used in or around any part of the oven.

• Clean Only Parts Listed in Manual.

• Before Self-Cleaning the Oven - Remove broiler pan

and other utensils.

For units with ventilating hood -

• Clean Ventilating Hoods Frequently - Grease should

not be allowed to accumulate on hood or filter.

• When flaming foods under the hood, turn the fan on.

SAVE THESE INSTRUCTIONS

PARTSAND FEATURES

This manual covers several different models. The range you have purchased may have some or all of the items listed. The locations and

appearances of the features shown here may not match those of your model.

Control Panel

O;F'ARRET

lOW _A×

1_9 _EAR

2 8 AR_IE_

3 7

lOW _AX

1_9 F_ONT

2 8 AVA_

3 7

OF_A_aET

LOW MAX

1 9

, OF

ARRIER_ 2 8

2e0 m 150

lOW MAX

1 9

150 AVAN_ 2 8

OVEN,_OUR

3 7

1. Left rear control knob

2. Left front control knob

Range

3. Electronic Display (on some models)

4. Oven Temperature Control

5. Right rear control knob

6. Right front control knob

H 9

1. Surface Cooking Area

2. Anti-tip Bracket

3. Warming Zone (on some models)

4. Model and Serial Number Plate

(behind left side of

storage drawer)

5. Removable Storage Drawer

6. Control Panel

7. Hot Surface Indicator Light (ceramic

glass models only)

8. Automatic Oven Light Switch (on

some models)

9. Door Gasket

10. Broil Element

11. Bake Element (not visible on some

models)

Other Parts and Features

(not shown above/optional on some

models)

Manual Cooktop Light

Oven Door Window

Additional Oven Rack

COOKTOP USE

Fire Hazard

Turn off all controls when done cooking.

Failure to do so can result in death or fire.

Control knobs must be pushed in before turning them to a

setting. The controls can be set anywhere between MAX and

OFR

On models with Ceramic Glass, the controls work on the principle

of percent on, percent off. When the control is turned to setting 5,

the element will be on 50% of the time.

Use the following chart as a guide when setting heat levels.

SETTING RECOMMENDED USE

MAX • To start foods cooking.

• To bring liquids to a boil.

9-7 • To hold a rapid boil.

• To quickly brown or sear meat.

6-4 • Tocook gravy, pudding and sauce.

• Tofry poultry or meat.

• To maintain a slow boil.

3-1 • To stew or steam food.

• To simmer food.

LOW • To keep foods warm.

• To melt chocolate.

• Precise simmer control.Simmer Element

(on some models)

Power On Lights

The Power On lights beside the control knobs indicate which

surface elements are turned on. A Power On light will glow when

its corresponding surface element is turned on.

........._1111

1. Powor on light

The simmer element is identified on the disc in the center of the

element. This element can maintain lower temperatures for

preparation of foods that require very low heat such as sauces,

chocolate or cheese.

Food Poisoning Hazard

Do not let food sit for more than one hour before

or after cooking.

Doing so can result in food poisoning or

sickness.

Use the Warming Element to keep cooked foods warm. One hour

is the recommended maximum time to maintain food quality.

Do not use it to heat cold foods.

The Warming Element can be used alone or when any of the

other surface cooking areas are being used. The Warming

Element area will not glow red when cycling on. However, its

indicator light will glow as long as the Warming Element area is

too hot to touch.

• Use only cookware and dishes recommended for oven and

cooktop use.

• Cover all foods with a lid or aluminum foil. When warming

baked goods, allow a small opening in the cover for moisture

to escape.

REMEMBER: When range is in use or (on some

models) during the Self-Cleaning cycle, the entire

cooktop area may become hot.

• Do not use plastic wrap to cover food. Plastic wrap may melt.

• Use pot holders or oven mitts to remove food.

To Use:

1. Set switch to ON.

2. Set switch to OFF when finished.

The surface cooking area will glow red when an element is on. It

will cycle on and off, at all settings, to maintain the selected heat

level.

It is normal for the surface of white ceramic glass to appear to

change color when surface cooking areas are hot. As the glass

cools, it will return to its original color.

Wiping off the cooktop before and after each use will help keep it

free from stains and provide the most even heating. For more

information, see "General Cleaning" section.

• Do not store jars or cans above the cooktop. Dropping a

heavy or hard object onto the cooktop could crack it.

Do not leave a hot lid on the cooktop. As the cooktop cools,

air can become trapped between the lid and the cooktop,

and the ceramic glass could break when the lid is removed.

For foods containing sugar in any form, clean up spills and

soils as soon as possible. Allow the cooktop to cool down

slightly; then, remove the spills while the surface is still warm.

If sugary spills are allowed to cool down, they can adhere to

the cooktop and can cause pitting and permanent marks.

Do not slide cookware or bakeware across the cooktop.

Aluminum or copper bottoms and rough finishes on

cookware or bakeware could leave scratches or marks on the

cooktop.

Do not cook popcorn in prepackaged aluminum containers

on the cooktop. It could leave aluminum marks that cannot

be removed completely.

Do not allow objects that could melt, such as plastic or

aluminum foil, to touch any part of the entire cooktop.

Do not use the cooktop as a cutting board.

Use cookware about the same size as the surface cooking

area. Cookware should not extend more than 1 in. (2.5 cm)

outside the area.

/// \\

1.Surface Cooking Area

2. Cookware/Canner

3. 1 in. (2.5cm) Maximum Overhang

Use flat-bottomed cookware for best heat conduction and

energy efficiency. Cookware with rounded, warped, ribbed or

dented bottoms could cause uneven heating and poor

cooking results.

Determine flatness by placing the straight edge of a ruler

across the bottom of the cookware. While you rotate the ruler,

no space or light should be visible between it and the

cookware.

• Cookware designed with slightly indented bottoms or small

expansion channels can be used.

• Make sure the bottoms of pots and pans are clean and dry

before using them. Residue and water can leave deposits

when heated.

• Do not cook foods directly on the cooktop.

HOT Surface Indicator Lights

Single HOT surface indicator light (on some models)

• Four or five HOT surface indicator lights (on other models)

• Five HOT surface indicator lights (on models equipped with

Warming Element)

The HOT surface indicator lights on the cooktop surface will glow

when their corresponding surface elements are turned on. The

HOT surface indicator lights will continue to glow as long as the

elements are too hot to touch, even after they are turned off.

NOTE: Heat from the oven vent may cause the left rear HOT

surface indicator light to glow to show that the area is too warm

to touch.

The cooktop light is in the top of the control console. The switch

is on the control console. Push the switch to turn the light on. The

light may take a few seconds to light up.

Coilelementsshouldbelevelforoptimalcookingresults.Burner

bowls,whenclean,reflectheatbacktothecookware.Theyalso

helpcatchspills.

Cookwareshouldnotextendmorethan1in.(2.5cm)overthe

coilelement.Ifcookwareisunevenortoolarge,itcanproduce

excessheatcausingtheburnerbowltochangecolor.Formore

information,seethe"GeneralCleaning"section.

NOTE:Beforeremovingorreplacingcoilelementsandburner

bowls,makesuretheyarecoolandthecontrolknobsareinthe

offposition.

To Remove:

1. Push in the edge of coil element toward the receptacle. Then

lift it just enough to clear the burner bowl.

The lift-up cooktop provides easy access for cleaning beneath.

Be careful not to drop the cooktop. Damage could occur to the

finish and the cooktop frame. For more information, see the

"General Cleaning" section.

To Lift:

1. Lift the cooktop by both front corners until the supports lock

into place.

Pull the coil element straight away from the receptacle.

3. Lift out the burner bowl.

To Replace:

1. Line up openings in the burner bowl with the coil element

receptacle.

To Replace:

1. Lift the cooktop from both sides while pressing the support

rods back to unlock them.

2. Slowly lower the cooktop into place.

When canning for long periods, alternate the use of surface

cooking areas, elements or surface burners between batches.

This allows time for the most recently used areas to cool.

• Center the canner on the grate or largest surface cooking

area or element. Canners should not extend more than 1 in.

(2.5 cm) outside the cooking area.

• Do not place canner on two surface cooking areas, elements

or surface burners at the same time.

• On ceramic glass models, use only flat-bottomed canners.

• On coil element models, the installation of a Canning Unit Kit

is recommended. If a kit is not installed, the life of the coil

element will be shortened.

• For more information, contact Agriculture Canada.

Companies that manufacture home canning products can

also offer assistance.

2. Holding the coil element as level as possible, carefully push

coil element terminal into the receptacle.

3. When the terminal is pushed into the receptacle as far as it

will go, push down the edge of the coil element opposite the

receptacle.

IMPORTANT: Never leave empty cookware on a hot surface

cooking area, element or surface burner.

Ideal cookware should have a flat bottom, straight sides, a well-

fitting lid and the material should be of medium-to-heavy

thickness.

Rough finishes may scratch the cooktop. Aluminum and copper

may be used as a core or base in cookware. However, when used

as a base it can leave permanent marks on the cooktop or grates.

Cookware material is a factor in how quickly and evenly heat is

transferred, which affects cooking results. A nonstick finish has

the same characteristics as its base material. For example,

aluminum cookware with a nonstick finish will take on the

properties of aluminum.

Usethefollowingchartasaguideforcookwarematerial

characteristics.

COOKWARE CHARACTERISTICS

Aluminum • Heats quickly and evenly.

• Suitable for all types of cooking.

• Medium or heavy thickness is best for

most cooking tasks.

Cast iron • Heats slowly and evenly.

• Good for browning and frying.

• Maintains heat for slow cooking.

Ceramic or • Follow manufacturer's instructions.

Ceramic glass • Heats slowly, but unevenly.

• Ideal results on low to medium heat

settings.

Copper • Heats very quickly and evenly.

Earthenware • Follow manufacturer's instructions.

• Use on low heat settings.

Porcelain • See stainless steel or cast iron.

enamel-

on-steel or

cast iron

Stainless steel • Heats quickly, but unevenly.

• A core or base of aluminum or copper

on stainless steel provides even

heating.

ELECTRONIC

OVENCONTROL

2 ........ _

......

1. Timer Display 3. Timer

2. Clock 4. Up Pad

5. Down Pad

When power is first supplied to the range, "12:00" will appear on

the display.

If "12:00" appears at any other time, a power failure has

occurred. Reset the Clock. See "Clock" section.

Any time the Timer is not in use, the display will show the time of

day.

Setting the Clock

1. Press the CLOCK pad (button).

2. Press the up or down pad (button) until the correct time

shows on the display.

3. Each tap of the up or down pad(s) or button(s) will change the

displayed time by I minute. If a button is held, the displayed

time will change in 10-minute increments. The Set Clock

mode automatically exits to the clock display mode

60 seconds after the last data change.

NOTE: When the range is first plugged in, or after a power

interruption, the display will flash "12:00" until the CLOCK

pad (button) is pressed.

+ 22 hidden pages