RONDISH TXP 11 User Manual

Designs in Security / Healthcare / Communication
User Manual (V0.11)
Features
Includes standard lanyard with anti-ligature point
Option to use watch strap or hospital wristband
Splash resistant
Low battery alert
Changeable battery (Type: CR2450)
Functions
Patient CALL when button is pressed
Man-down alert in case of patient fall
Assurance LED after alarm trigger – steady ON during transmission ~5s
Magnetic reset option – flash 3x for 1s each after reset
Patient tracking
Programmable Settings
Function Options Default
Magnetic reset On/Off ON Man-down alert On/Off ON Tracking signal Off/30s/1m/2m/5m OFF Device ID 0001-9999 Set at factory Area code 0-7 0
Receiving devices
UNCG-31 CarePort
NGM-21 Pegasus/CordFree Monitor
CBM-03 (if possible) CordLess Monitor – send floor mat code
CMD-11 Central Monitor Display
PAG-11/21 Caregiver Alert Pager
CMEX-11/21 Cordless Expander
ZP-01 Zone Processor for Protektor/SmartBeds
ERX-01 Field Receiver for WEAS Systems
ILB-11 Indication Light Box
Packaging
Individually packaged in white cardboard box
RONDISH COMPANY LIMITED
Unit G/H, 4/F, Block 1, Kwai Tak Industrial Centre, 15-33 Kwai Tak St., Kwai Chung, N.T.
Tel.: (852) 2541 6685 Fax: (852) 2541 7411 Email: rcl@rondish.com Website: www.rondish.com
Designs in Security / Healthcare / Communication
FCC/CE Statement
FCC Interference Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Notice:
Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help. The antenna(s) used for this transmitter must not be co-located of operating in conjunction with any other antenna or transmitter. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the Fcc radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8inches) during normal operation.
RF exposure statements
This equipment complies with FCC radiation exposure requirement set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance.
Operate Frequency Bands : 433.92MHz
Caution
Risk of Explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
EU declaration of conformity
Rondish Company Limited hereby declares that the device is in compliance with the essential requirements and other relevant
provisions of directives 2014/53/EU, 2014/30/EU and 2014/35/EU.
RONDISH COMPANY LIMITED
Unit G/H, 4/F, Block 1, Kwai Tak Industrial Centre, 15-33 Kwai Tak St., Kwai Chung, N.T.
Tel.: (852) 2541 6685 Fax: (852) 2541 7411 Email: rcl@rondish.com Website: www.rondish.com
Loading...