RONDA AD101-1 User Manual
A
A
A
D
D
D
1
1
1
0
0
0
1
1
1
SWISSEBAUCHES
-
1
I
n
s
t
r
u
c
t
i
o
n
M
a
n
u
a
l
-
1
I
n
s
t
r
u
c
t
i
o
n
M
a
-
1
I
n
s
t
r
u
c
t
i
o
n
M
Set
a
n
n
u
u
a
a
l
l
Mode/Adjust
Shift
Features:
Mode Operation
Normal Time, Calendar, Alarm, Chronograph, Timer and Display ON/OFF.
Key Operation:
¾ Rotate S2 to enter the Modes (→ Up; ←Down)
Normal Time
1. NORMAL TIME
¾ Press and hold S1 for 3 seconds to enter the setting mode and
Hour digits flash Rotate S2 up or down to increase or decrease the
digit.
¾ Press S3 to jump from each of the setting items
¾ Press S1 to exit the setting mode
For Analog Setting
Pull the crown out and turn the crown upward or downward to
adjust the hands at the desired time.
Remark:
Digital and analog setting procedures should be separated, e.g.
digital increase but the analog remain unchange.
For T2 Time:
In Normal Time Mode, press S3 to enter the T2 time mode, press S1
for 3sec. to enter the setting mode and the setting procedures are
shown as follows.
Remark:
1) In T2 Time mode the Analog will not change while setting in
2) The minute cannot be adjusted in T2
Calendar
S2 (adjust)
HOUR
S2 (adjust) S2 (adjust)
digital. The date can only increase or decrease one day
HOUR
S3
S2 (adjust)
S3
MINUTE
Alarm
S3
DATE
S3
S2 (adjust)
S3
SECOND
S3
Chronograph Timer
S2 (select)
S3
12/24H
S2 (select)
12/24H
Date
Time Setting Mode
T2 Time Setting Mode
Normal Time
27.06.2004
Model: AD101-1 Page: 1/4 Edition: 3
2. CALENDAR MODE
¾ Turn S2 upwards to enter the Calendar Mode from Time Mode
¾ Press S1 to activate the Alarm ON or OFF
¾ Press and hold S1 for 3 seconds to enter the setting mode
¾ Rotate S2 up or down to increase or decrease the digit
¾ Press S3 to jump from each of the setting items
¾ Press S1 to exit the setting mode
S2 (adjust)
DATE
Remark:
1) Day of Week and Week of Year will change automatically after
setting.
2) Perpetual Calendar : 2000 ~ 2099
3) Press S1 to display or hide the Week of Year
4) Press S3 will display “No Function”
3. ALARM MODE
S3
S2 (adjust)
MONTH
S3
S2 (adjust)
S3
YEAR
S2 (select)
S3
D-M / M-D
SWISSEBAUCHES
¾ Turn S2 upwards to enter the Alarm Mode from Calendar Mode.
¾ Press S1 to select Alarm On or Off
¾ Press and hold S1 for 3 seconds to enter the setting mode
¾ Rotate S2 the up or down to increase or decrease the digit
¾ Press S3 to jump from each of the setting items
¾ Press S1 to exit the setting mode
S2 (adjust)
HOUR
S3
S3
S2 (adjust)
MINUTE
Remark:
Beep sound will be released for 60 seconds at preset Alarm and
press any key to stop it.
For Alarm Agenda:
¾ In Alarm Mode, press S3 to enter Alarm Agenda Mode and once
again return to Alarm Mode
¾ Press and hold S1 for 3 seconds to enter the setting mode
¾ Rotate S2 up or down to increase or decrease the digit
¾ Press S3 to jump from each of the setting items
¾ Press S1 to exit the setting mode
¾ Press S1 again to activate the AG alarm ON or OFF
S2 (adjust) S2 (adjust)
HOUR
S2 (adjust)
YEAR
S3
S3
S2 (adjust)
MONTH
MINUTE
S3
S3
Agenda Setting
S2 (adjust)
DATE
Remark:
1) Hour-Minute or Date-Month-Year display will interchange continually when entering this mode.
2) If setting a past time, the mode will show OFF and pressing S1 will show “No Function”
3) Alarm will be released for 60 seconds at preset time and press any key to stop it.
27.06.2004
Model: AD101-1 Page: 2/4 Edition: 3
Loading...