remove cover. Refer servicing to qualified service
personnel.
Please read the manual carefully before operation.
Keep it in a safe place for future reference.
USAGE NOTES OF DVD PLAYER
Please don't put the player at following position.
Sun shining or heat radiation place, such as
heater, stoves or other appliances that produce
heat.
3. 10 bit digital video converter, the resolutions
is more than 500 lines.
4. 192KHz/24bit digital audio converter, high quality
of sound effect, professional Hi-Fi level.
5. Video component signal output S-video output,
composite video output, optical and coaxial
output for selection.
6. 8 kinds of language, 32 kinds of caption mode
can be selected play with various angles.
7. Various of screen selection of TV display and
you may select preferred story section to view.
8. Professional digital karaoke effect, with auto
vocal
9. Full function intelligent upgrade.
10. Progressive scan video output.
function.
Top of other heat radiation device.
Bad ventilation or dusty, high moisture, unsteady
or vibration place or expose the unit to rain or
water.
Nearby the high power speaker or on the same
stand with speaker, keep it away from shocking
to protect its normal work.
Don't play the disc with scratch or bent,
creaked to prevent the unit from damage.
USAGE NOTES OF POWER
SUPPLY
The power supply required is AC 100-240V 50/60Hz.
When not planning to use this unit for long
periods of time, disconnect the AC power plug
from the outlet.
To prolong its service life, the changeover period
between switch-on and switch-off, should not be
less than ten seconds.
DVD PLAYER
192-KHz/24-bit Digital/analog
(D/A) converter
This latest conversion technology matches
software of 192KHz sampling frequency and 24-bit data,
this giving you perfect sound quality without distortion.
DIGITAL AUDIO OUTPUT
The coaxial/fiber optic output enables the user
to connect external 6-channel AV amplifier and
process or with built-in Dolby digital codes and
MPEG or DTS modulating capacity using only
one cord, so that you can enjoy different DVD
and CD conveniently.
Component video output
component video output (Y, U, V) enables
you to enjoy real DVD effect. It renders pure colour
signals as they are, and without any video noise.
AC-3 and DTS decoding output
This appliance decodes Dolby AC-3 signal
source, and outputs the signal through analog 6
channels.
Also, it can outputsDTS signal through coaxial or
optical.
1. Full compatible with DVD, VCD, CD, MP3 with
high error correction ability.
2. Read Picture CD to realize digital Picture displaying.
Page 2
CONTENT
1. Brief Instruction of Controls
2. Preparations
2.1 Accessories
2.2 Battery installation of remote controller
2.3 System connection
2.4 Play mode setting......................................................................................................... 23
(check whether be fully equipped after open the box)
2.2 Battery installation of remote controller
Place two AA batteries in the battery compartment. Be sure the polarities are correct. There should
be no large obstacles between the remote controller and the main unit.
2.3 System connection
1. When making connection between this unit and other components, be sure all connection with
power-off.
2. Audio/Video cables are connected according to the different colour identification and they should
be fitted firmly.
Yellow to video terminal
White to audio terminal
Red to audio terminal
3. Scheme of connection
5.1CH input
Multi Standard TV
VOLUME
CEN- CEN+
BAL-L BAL-R
SUR- SUR+
MUTE RESET
MIN
MIN
BASS
MAX
TREBLE
DOWNUP
MAX
ECHO MIC VOL
1 2
MIC
1 2
2910H POWER AMPLIFIER
POWER
LOUNDESS
D
ON OFF
REMOTE
TUNER
VCD
LD DVD VCR
3 STEREO
PRO LOGIC
BYPASS NORMAL
AC-3
15ms 20ms 25ms
WIDE
30ms
PHANTOM DSP TEST
LOUNDESS
VGA input
http://www.gospell.com
~ 100-240V
50/60 Hz
25W
Optical, coaxial input
Digital Home Theater amplifier
AP-7610
REMOTE
SIMUL
MATR
DISCO
POPS
CLAS
HALL
LIVE ROCK
POWER
DSP
AV SURROUND INTEGRATED AMPLIFIER
STANDBY/ON
MIC
1 2
SENSOR
Pro Logic
Digital 3-stereo
( )
SRS
AC3 IN
5.1CH
WIDE
NORMAL
DIRECT BYPASS AUTO TUNED STEREO MEMORY
PHANTOM
STANDBY
VCDCDVCR
TEST
DVD
AC-3
DOLBY
C R
L
KHz
MHz
100 300 1K 3K 10K
S
S
READY
AUX
TAPE
BAND PRESET
TUNING
MEMO
DIRECT BASS TREBLE
CHANNEL SELECT
FM MODE AUTO
DELAY TIME
CENTER MODE
L/R SW/CEN SUR L/R
DSP
3D
BOOST
22
Page 6
2.4 Play mode setting
If you found the picture could not spread all
screen or no color, please select PAL, NTSC or
auto by pressing <N/P> key.
3. Basic operation
Once all the connection of the system have
been done, this machine will be ready for service.
Prior to play, make sure to complete the following
preparatory operations.
1. Switch on TV and select AV mode. If it's
S-Video connect select S-Video mode.
2. Switch on amplifier if it connected, select
AC-3 or DVD mode.
3. Plug-in of DVD player.
Step 1: Press POWER button, DISC LOADING
shown on screen.
POWER
If there is no disc, NO DISC shown on screen:
PAUSE key:
Press <PAUSE> key to put the playback in
temporary halt.
PREV key:
Press <PREV> key to skip backward to the title
before current.
NEXT key:
Press <NEXT> key to skip forward to the title
after current.
REV key:
Press <REV> key to get 2X, 4X, 8X, 16X,
32X or normal play circular fast reverse function
on disc playing.
Step 2: Press <OPEN/CLOSE> key on the
front panel, the tray comes out automatically.
Step 3: Place disc on the tray, press
<OPEN/CLOSE> key to close the tray, the disc type
will be shown on the up-left corner of the screen.
Note: Press POWER key on the remote
controller to bring the unit into standby status.
3.1 Play disc
Once it has read the disc, this machine will
start playing automatically.
If it is a DVD, the machine will show the DVD
menu or title menu.
If it is a VCD2.0 disc, the machine will activate
PBC playback control status.
If it is a CD, this machine will start playing in
the sequence.
PLAY key:
FWD KEY:
Press <FWD> key to get 2X, 4X, 8X, 16X,
32X or normal play circular fast forward function
on disc playing.
STOP KEY:
Press <STOP> key first time to followed by a
<PLAY> key will allow a auto resume to the last
played location. Press <STOP> key twice will halt the
playback completely.
Press <PLAY> key to return playback while
disc stop, pause or step.
23
Page 7
4. Description of function
4.6 Title
For DVD disc playing, press <TITLE> key to
get title menu.
4.1 Screen display
In the condition of DVD disc playing, press
<DISPLAY> key on the remote controller to display
the single elapsed time, single remain time, total
elapsed time, total remain and other information of
the disc.
In the condition of VCD disc playing, press
<DISPLAY> key on the remote controller to display
single elapsed time, single remain time, display off
and other information of the disc circular.
DISPLAY
4.2 Play mode
Press <N/P> key one by one to get NTSC.
PAL, MULTI display on the screen.
4.3 Subtitle
This function may enable you to select multi
subtitle languages (as many as 32 kinds and only
for the disc with multi subtitle encoded). Press
<SUBTITLE> key to get desired display.
For example, to select language 2 from
8 options.
4.7 Menu
Press <ME NU> key to return to main menu for
DVD disc playing.
Press <MENU> key to return PBC menu for
VCD 2.0 disc playing.
4.8. Direction key
There are four direction keys assist in navigation.
They are normally use while in title, navigation, and
setup menu.
4.9 Number key
Press relevant number key to play the favorite
chapter or title according to the serious number of
the menu.
4.10 GOTO
For disc playing, press <GOTO> key to goto desire
title, chapter, time.
GOTO
Press left or right direction keys to select title or
chapter or time, then press number to input time, title,
chapter, then press <Play> key to goto desired position
and begin playing.
4.4 Angle
During athletic match, concert or theatrical
program, press <ANGLE> key continually on
remote controller to select various angle to
view the same image (This operation works
only for the disc with multi angle encoded).
4.5 Language
There are 8 kinds of language for selection.
Press < LANGUAGE> key to select language
(This operation works only for the disc with multi
subtitle encoded).
For example, to select language 1 from 2
language options, sound field effect AC-3,
2channels, English.
When play a VCD disc, press this key to select Mono
Left, Mono Right, Mix Mono, Stereo audio output.
4.11 PBC play
PBC
For VCD 2.0 disc playing, in the condition of PBC
ON, song selection can only be done when the
playing returned to the main menu. In the condition of
PBC OFF, press relevant number key to get favorite
song during playing.
4.12 Repeat from A to B
First time pressing <A-B> key to set initial point
(A):
Second time pressing <A-B> key to set end
point (B). After setting, the program repeats
playing from A to B. Third time pressing <A-B>
key to cancel repeat.
A-B
24
Page 8
4.13 Repeat
REPEAT
For DVD disc playing, press <REPEAT> key to
repeat title, chapter, all or close repeat. For VCD disc
playing, press <REPEAT> key to repeat track, all or
close repeat.
4.14 ZOOM
The picture may be enlarged by up to 4 times
to facilitate you to enjoy a particular action or still
picture. Press <ZOOM> key 6 times, the zoom
scales will be 2x, 3x, 4x ,1/2,1/3 and 1/4
respectively. Pressing direction key to move the
screen while zoom in. Pressing the button once
again will return to normal play status.
4.15 CHANNEL
When play SVCD,VCD or CD disc, press
<CHANNEL> key to select Left Vocal or Right Vocal.
4.19 Virtual Remote Control
For DVD and VCD disc playback, press <V-REMOTE>
key, the screen will display a virtual remote control, you
can use common functions by direction key and < >
key .
4.20 Video Mode
When disc playback, press <V-MODE> key, you can
change the video output to 4 mode: YUV, YPbPr, VGA,
S-VIDEO.
4.16 Volume and Mute
Press <VOLUME +> key to increase volume,
press <VOLUME -> key to reduce volume till to no
volume output.
Press <MUTE> key to get mute, press it again
to recover it from mute.
4.17 PROGRAM
In the condition of disc playing, press
<PROGRAM> key on remote controller to come
into program status; Enter the track Numbers desired,
2,4, 6 and 8, for example, you can press <CLEAR>
key to remove the numbers if you enter wrong number,
then using direction key move the cursor to start
button, then < > key to start playing.
To exit the programmed play mode, simply
press the <PROGRAM> key to exit it.
4.18 SLOW
Press <SLOW> key repeatedly, you will
enjoy the slow motion at a 1/2x, 1/4x, 1/8x,and
1/16x slower forward speed, or a 1/2x, 1/4x and
1/8x, 1/16x slower backward speed and normal
backward speed.
5. SETTING OF THE SYSTEM
1. DVD MENU SETUP
Press the SETUP button on the remote controller,
the General Setup Menu will be displayed.
1. After accessing the SETUP Menu, press the
direction buttons for up and down movement to
select an item desired, then press the < > button
to confirm your entry and move to the sub-menu.
Use the left and right direction buttons to move the
pointer, and the up and down direction buttons to
select the option desired. Also, press the < >
button to confirm your selection, press left direction
button to return the last menu. Now, setup of this current
function is completed.
2. To end the setup, press the <SETUP> button
again. In the setup menu, you may choose any
of the following options as you like.
1.1 GENERAL SETUP
This option is used to set up TV screen format,
video functions and DVD functions, with options of
"TV Display", "Angle Mark", "Osd Language",
"Screen Saver", "Last Memory".
25
Page 9
1.1.1 TV form
Follow the operating instructions stated in "DVD
MENU SETUP" in combination with the desired option
in the following figure.
General Setup Page
TV Display
Angle Mark
OSD Lang
Screen Saver
Last Memory
Normal/PS
Normal/LB
Wide
1.1.2 Osd Language
The user may use this item to set the language
of the setup menu and screen display to English or
Romanian.
General Setup Page
TV Display
Angle Mark
OSD Lang
Screen Saver
Last Memory
English
Set OSD Language
Set TV Display Mode
Note:
1). Irrespective of what screen format you have
selected, if your screen displays in 4:3 format, the
picture will be shown in that format anyway.
2). For DVDs, the screen format is convertible.
3). If your screen displays in 4:3 format, when a
DVD with 16:9 display format is used, the picture
will be flattened.
Film
format
4:3
16:9
TV
screen
Normal
4:3
Full view
Mailbox
16:9
Wide screen
1.1.2 Angle labeling
When a DVD providing multiple angles is used,
the user may select a particular shooting angle.
Follow the operating instructions stated in "DVD
MENU SETUP" in combination with the desired
option in the following figure.
General Setup Page
1.1.3. SCREEN PROTECTION
Select in " General setup " menu to get Screen
protection Setting according to following figure.
General Setup Page
TV Display
Angle Mark
OSD Lang
Screen Saver
Last Memory
On
Off
Screen Saver
1.1.4. Memory Play Setting
According to following figure to get Selected
Setting.
General Setup Page
TV Display
Angle Mark
OSD Lang
Screen Saver
Last Memory
On
Off
TV Display
Angle Mark
OSD Lang
Screen Saver
Last Memory
Set Angle Mark
On
Off
Set Last Memory State
1.2. AUDIO SETUP
Includes speaker setup, digital Audio set up. Dolby
digital setup, equalizer setup and 3 D process
26
Page 10
Audio Setup Page
Speaker Setup Page
Speaker Setup
SPDIF Setup
Dolby Digital Setup
Channel Delay
Equalizer
3D Processing
HDCD
Karaoke Setup
Goto Speaker Setup Page
1.2.1. SPEAKER SETUP
This submenu options include Downmix, Front
Speaker, Center speaker, Rear Speaker, Subwoofer,
Post DRC.
1.2.1.1 DOWNMIX MODE
Follow the operating instructions stated in "DVD
MENU SETUP" in combination with the desired
option in the following figure.
Speaker Setup Page
Downmix
Front Speaker
Center Speaker
Rear speaker
Sub Woofer
Test Tone
Dialog
Post DRC
Set Downmix Mode
LT/RT
Stereo
V SURR
Off
This setting is suitable for films. If you only need
two channels to enjoy music, it's recommended to
select the 2 option. Where 5.1 theater sound is
available, the 4 option is recommended.
nd
th
1.2.1.2 FRONT SPEAKER
When set center, rear and subwoofer to off
and front toLarge,then front audio signal can
be mixed from center, rear and sub woofer speakers,
Usually it is set to Small.
Downmix
Front Speaker
Center Speaker
Rear speaker
Sub Woofer
Test Tone
Dialog
Post DRC
Setup Front Speaker
Large
Small
Front speaker is set to Large or Small.
1.2.1.3 CENTER SPEAKER
Follow the operating instructions stated in "DVD
MENU SETUP" in combination with the desired
option in the following figure.
Speaker Setup Page
Downmix
Front Speaker
Center Speaker
Rear Speaker
Sub Woofer
Test Tone
Dialog
Post DRC
Setup Center Speaker
Large
Small
Off
The central speaker is set to Large, Small or Off.
1.2.1.4 REAR SPEAKER
The rear speaker is set to Large, Small or Off.
Follow the operating instructions stated in "DVD
MENU SETUP" in combination with the desired
option in the following figure.
Speaker Setup Page
Downmix
Front Speaker
Center Speaker
Rear Speaker
Sub Woofer
Test Tone
Dialog
Post DRC
Large
Small
Off
27
Setup Rear Surround Speaker
Page 11
1.2.1.5 WOOFER SPEAKER
The woofer speaker is set to ON or OFF
Follow the operating instructions stated in "DVD
MENU SETUP" in combination with the desired
option in the following figure.
Speaker Setup Page
Downmix
Front Speaker
Center Speaker
Rear Speaker
Sub Woofer
Test Tone
Dialog
Post DRC
Setup Subwoofer
On
Off
1.2.1.8 OUTPUT DYNAMIC COMPRESS
This function can compress audio signal with wide
dynamic range proportionally to reduce intense
impact to speakers.
Follow the operation instructions stated in DVD
menu setupin combination with desired option
in the following figure.
Speaker Setup Page
Downmix
Front Speaker
Center Speaker
Rear Speaker
Sub Woofer
Test Tone
Dialog
Post DRC
Post DRC
On
Off
Auto
1.2.1.6 WOOFER SPEAKER
This function can test front speakers, rear speakers
and center speaker.
Follow the operating instructions stated in "DVD
MENU SETUP" in combination with the desired
option in the following figure.
Speaker Setup Page
Downmix
Front Speaker
Center Speaker
Rear Speaker
Sub Woofer
Test Tone
Dialog
Post DRC
Test Tone
On
Off
1.2.1.7 DIALOG VOLUME
This function can adjust the volume of dialog when
story disc playback.
Follow the operating instructions stated in "DVD
MENU SETUP" in combination with the desired
option in the following figure.
Speaker Setup Page
Set up output dynamic compress.
Output dynamic compress is set to On,
Off or Auto
1.2.2 DIGITAL AUDIO SETUP
Includes digital audio output and LPCM
output.
1.2.2.1 DIGIAL AUDIO OUTPUT
Dolby digital or DTS signals can be output
through OPTICAL or COAXIAL in rear panel.
Follow the operation instructions stated in
DVD menu setupin combination with
desired option in the following figure.
SPDIF Setup Page
Spdif Output
CD
Dolby Digital
DTS
MPEG
PCM Channel
LPCM Out
Setup SPDIF
SPDIF OFF
SPDIF/RAW
SPDIF/PCM
Manual
1.2.2.2 PCM Channel
Select which channels signal will be input to
the system from DVD disc.
Downmix
Front Speaker
Center Speaker
Rear Speaker
Sub Woofer
Test Tone
Dialog
Post DRC
Dialog Volume
28
SPDIF Output
CD
Dolby Digital
DTS
MPEG
PCM Channel
LPCM Out
Setup SPDIF
SPDIF SETUP PAGE
SPDIF L/R
SPDIF LS/RS
SPDIF C/LFE
Page 12
1.2.2.3 LPCM OUTPUT
Follow the operation instructions stated in DVD
menu setup in combination with desired option
in the following figure.
SPDIF Setup Page
1.2.4 Channel Delay
Follow the operation instructions stated in
DVD menu setupin combination with desired
option in the following figure. You can select
RS, LS, Center, Subwoofer speaker by up
down direction key and adjust the suitable distance
by left, right direction key.
SPDIF Output
CD
Dolby Digital
DTS
MPEG
PCM Channel
LPCM Out
Set LPCM SPDIF Output Rate
48K
96K
1.2.3 DOLBY DIGITAL SETUP
Dolby digital setup includes L+R and
dynamic range compress.
1.2.3.1 L+R SETUP
Follow the operation instructions stated in
DVD menu setupin combination with desired
option in the following figure.
Dolby Digital Setup
Dual mono
Dyna mic
Dual mono (1+1) setup
Stereo
L-mono
R-mono
Mix-mono
If you have Dolby digital output in your
amplifier/decoder,you may select stereo, Left,
right and mixed sound accordingly.
1.2.3.2 DYNAMIC RANGE COMPRESS
Follow the operation instructions stated in
DVD menu setupin combination with desired
option in the following figure.
Dolby Digital Setup
Dual Mono
Dyna Mic
FULL
3/4
1/2
1/4
OFF
Channel Delay Page
Subwoofer
Goto CH Delay Setup
1.2.5 EQUALIZER
Dolby digital setup includes EQ type, Bass
boost, Super bass and Treble boost.
1.2.5.1 EQ TYPE
Follow the operation instructions stated in
DVD menu setupin combination with desired
option in the following figure.
Equalizer Page
EQ Type
Bass boost
Super bass
Treble boost
Select Equalizer Type
None
Rock
Pop
Live
Dance
Techno
Classic
Soft
You can select an equalizer type or close
equalizer effect.
1.2.5.2 BASS BOOST
Follow the operation instructions stated in
DVD menu setupin combination with desired
option in the following figure.
Equalizer Page
EQ Type
Bass boost
Super bass
Treble boost
On
Off
Dynamic Range Compression
Bass boost
Bass boost is set to on or off.
29
Page 13
1.2.5.3 SUPER BASS
Follow the operation instructions stated in
DVD menu setupin combination with desired
option in the following figure.
1.2.6.1.1 PRO LOGIC II SETUP
Follow the operation instructions stated in
DVD menu setupin combination with desired
option in the following figure.
Equalizer Page
EQ Type
Bass boost
Super bass
Treble boost
Super bass
On
Off
Subwoofer is set to ON or OFF
1.2.5.4 TREBLE ENHANCER
Follow the operation instructions stated in
DVD menu setupin combination with desired
option in the following figure.
Equalizer page
EQ Type
Bass Boost
Super Bass
Treble Boost
On
Off
PRO Logic II CONFIG
PRO Logic II
Mode
Panorama
Dimension
Center Width
PRO LOGIC II
On
Off
Auto
1.2.6.1.2 PRO LOGIC II MODE SETUP
Follow the operation instructions stated in
DVD menu setupin combination with desired
option in the following figure.
PRO Logic II CONFIG
PRO Logic II
Mode
Pamorama
Dimension
Center Width
Music
Movie
Prologic
Auto
Treble Boost
Treble enhance is set to ON or OFF.
1.2.6 3D PROCESS SETUP
This submenu option includes Pro Logic II,
Reverb Mode..
1.2.6.1 PROLOGIC II SETUP
Follow the operation instructions stated in
DVD menu setupin combination with desired
option in the following figure.
3D Processing Page
PRO LOGIC II
Reverb Mode
Select Pro Logic II Mode
1.2.6.1.3 PRO LOGIC II PANORAMA SETUP
Follow the operation instructions stated in
DVD menu setupin combination with desired
option in the following figure.
PRO Logic II CONFIG
PRO Logic II
Mode
Pamorama
Dimension
Center Width
Set Pro logic II panorama Control
On
Off
1.2.6.1.4 PRO LOGIC II SETUP
Follow the operation instructions stated in
1.2.6.2 Reverb MODE
Follow the operation instructions stated in
DVD menu setupin combination with desired
option in the following figure.
1.2.8 Karaoke Setup MODE
Follow the operation instructions stated the
function of Karaoke.
You can also open or close Karaoke function
by pressing <MIC> key on the remote control.
Karaoke Setup Page
MIC
MIC
On
Off
1.3 VIDEO SETUP
Video setup includesComponent, TV Mode,
Video Quality.
1.3.1 Component
Follow the operation instructions stated in
DVD menu setupin combination with desired
option in the following figure.
Video Setup Page
Component
TV Mode
Quality
Off
YUV
VGA
3d Processing Page
Pro Logic II
Reverb Mode
Reverb Mode
Off
Concert
Living Room
Hall
Bathroom
Cave
Arena
Church
1.2.7 HDCD FILTER SETUP
Follow the operation instructions stated in
DVD menu setupin combination with desired
option in the following figure.
HDCD Setup Page
Filter
Filter
Off
44.1K
88.2K
Component
You should set up it according which output jack
connect to the TV. If you connect TV with YUV, it
should be set to YUV, if you connect TV with scart,
it should be set to RGB, if you connect to a P-Scan
TV or PC monitor, it should set to VGA.
Note: If DVD player do not have a scart jack, the
option RGB will not be displayed, If it do not have a
VGA jack, the option VGA will not be displayed.
1.3.2 TV Mode
Follow the operation instructions stated in
DVD menu setupin combination with desired
option in the following figure.
31
Page 15
Component
TV Mode
Quality
Video Setup Page
INTERLACE
P-SCAN
1.3.3 CONTRAST
This menu can adjust the sharpness of the
video output.
Follow the operation instructions stated in
DVD menu setupin combination with
desired option in the following figure.
Video Quality Setup
Set P-SCAN On/Off
Set P-Scan on or off, if the component set to Off
or RGB, TV Mode can not be selected.
1.3.3 Quality
This submenu options include Sharpness,
Brightness, Contrast, Gamma, Hue, Saturation and
Luma Delay.
1.3.3.1 Sharpness
This menun can adjust the sharpness of the video
output.
Press right arrow or < > button to enter
adjustment mode; press LEFT and RIGHT arrow
buttons to make adjustment, press < >
button to return to setup menu.
1.3.7 Luma Delay
Follow the operation instructions stated in
DVD menu setupin combination with
desired option in the following figure.
Video Quality Setup
1.4 PREFERENCE SETUP
During stop mode, press the SETUP button to
access the PREFERENCE SETUP menu, which
includes items of TV type audio, subtitle, disc
menu language, age control, Password, default
values .
Preset values are essential to a DVD player. The
user may change these items as desired.
1.4.1 TV TYPE
Follow the operation instructions stated in DVD
menu setupin combinution with the desired option
in the following figure.
This product supports output of various system,
including AUTO, NTSC, PAL.
1)If your TV set has only NTSC or PAL system, the
screen will blink and become colourless when a wrong
system is selected. In this case, press the N/P button
on the Remote Control to switch the TV TYPE..
2)For more information of output format, refer to the
instructions or your TV set.
1.4.2 PBC
Follow the operating instructions stated in "DVD
MENU SETUP" in combination with the desired
option in the following figure.
Preference Page
Tv Type
PBC
Audio
Subtitle
Parental
Default
ON
OFF
33
Set PBC State
Page 17
1.4.3 DUBBING LANGUAGE
Follow the operating instructions stated in "DVD
MENU SETUP" in combination with the desired
option in the following figure.
Preference Page
TV Type
PBC
Audio
Subtitle
Parental
Default
English
French
Spanish
Chinese
Japanese
Korean
Russian
Thai
Preference Page
TV Type
PBC
Audio
Subtitle
Parental
Default
Set Parental Control
1 KID SAF
2 G
3 PG
4 PG 13
5PGR
6 R
7 NC 17
8 ADULT
For a film to be restricted for children, the film
class may be set according to label marking on the
disc.
Rreferred Audio Language
This machine provides English, French, Spanish,
Chinese and Japanese Korean, Russian, Thailand
as the built-in disc dubbing language options.
1.4.4 SUBTITLE
This machine provides English, French, Spanish,
Chinese and Japanese as the built-in subtitle
languages. When a DVD is played, the user may
hide the subtitle or choose any of them as the
preset subtitle language.
Follow the operating instructions stated in "DVD
MENU SETUP" in combination with the desired
option in the following figure.
Preference Page
TV Type
PBC
Audio
Subtitle
Parental
Default
Preferred Subtitle Language
English
French
Spanish
Chinese
Japanese
Korean
Russian
Thai
1.4.6 DEFAULTS
This option will resume the original settings of
this machine.
Follow the operating instructions stated in "DVD
MENU SETUP" in combination with the desired
option in the following figure.
Preference Page
TV Type
PBC
Audio
Subtitle
Parental
Default
Load Factory Setting
Reset
1.5 PASSWORD SETUP
Follow the operation instructions stated in
DVD menu setupin combination with desired
option in the following figure.
1.5.1 PASSWORD MODE
Password Setup Page
1.4.5 AGE CONTROL
Follow the operating instructions stated in
"DVD
MENU SETUP" in combination with the desired
option in the following figure.
34
Password Mode
Password
Password Mode
On
Off
Page 18
1.5.2 PASSWORD
The default is 136900 The user may change
it using this option.
Follow the operating instructions stated in
DVD MENU SETUPin combination with the
desired option in the following figure.
PASSWORD SETUP PAGE
Repeat play
Using this function, the user will be able to enjoy
a particular song or all the songs on the disc over
and over again.
1. Choose a particular song to be repeated.
2. Press the <REPEAT> button you can choose
folder repeat, single repeat or cancel the repeat
function.
PASSWORD MODE
PASSWORD
Change Password
Change
6. KARAOKE FUNCTION
1. Connection of Microphone
Adjust the MIC VOL on the front panel to the
minimum position, then insert the microphone into
the MIC jack. You can insert two microphones at the
same time.
2. Play Karaoke
a. Press MIC key to turn on the karaoke function.
Adjust the volume of microphone by press Volume+ and
Volume-.
b. Adjust the MIC volume knob to adjust the
volume of microphone.
c. Adjust karaoke volume and music volume to
your satisfaction by adjust the volume.
3. Special Function of Karaoke
a. Set the audio to STEREO.
b. Press the channel key on the remote controller,
select L/R channel acording different disc.
Note: This function is not available in DVD disc.
7. OPERATION OF MP3
FUNCTION
MP3 is an audio compression mode using Level
3 of the international standard MPEG, whereby
sound signal is compressed in a rate of 12:1. A MP3
disc can record music for play of over 600 minutes
or record over 170 songs, rivaling Cds in sound
quality.
To play a MP3 disc
1. Follow the basic operating instructions to insert
a MP3 disc, this machine will start to search the
information on the disc and show it in the display.
2. Press the direction keys to select the track
desired, and press <play> key to start playing..
3. Press stop key then direction key to select to other
menu.
Other functions:
When a MP3 disc is played, the features of mute,
volume control, pause and forward and backward
search will also be available. The operations are the
same with those of CDs.
8. JPEG
JPEG adopting the most efficient compression is
widely used as picture storage type flattened and
stored format.
Even if pictures are compressed 15-20 times. they
still have good effect. Supported by most picture
processing software, fit for picture storage, it has small
data and easy use .This machine can read. JPEGformat picture CD disc.
Press direction key to select picture display.
1.Put in disc correctly, the machine begins to
search disc information.
2. Press direction key to select picture, the press
<Play> key to make sure.
Select to play by menu
1. Put in disc, the machine searches disc information and
main menu displays on screen. Press direction key
to select picture, press <Play> key to make sure.
2. In condition of stop, press direction key to select
other pictures.
3. In condition of stop, select the first line file item
on the right, then press play key to return to upper
menu.
Other functions:
When playing picture CD. The machine allows pause,
repeat and browsing. Use the Next or Previous key to
browse.
Press <Zoom> key to enlarge picture. While in zoom
mode press fast forward or backward key to control
the zoom scale. To move the view area of the enlarged
picture, use the direction keys.
In view mode, pictures can be rotated with direction keys.
The type of slide show transition can be selected from
the navigation menu or simply by pressing <Program>
key.
35
Page 19
9. Trouble shooting guide
For your convenience, we have enlisted
some points to help solve problems you might
encounter while using DVD player.
No sound
Make sure the good connection between
player and other appliances such as power
amplifier or TV.
Make sure the right operation on TV and
power amplifier.
No picture
Make sure the good connection between
player and other appliances such as
TV.
Make sure TV works on well.
Make sure the DVD player is in correct mode,
otherwise, press <N/P> button several times to
solve it.
Disc does not play
Make sure the disc is loaded correctly
side is facing up on the disc tray).
Make sure the disc is clear.
Remote controller does not work
Move the obstacle between player and
controller away.
Point the remote controller at the remote
control sensor.
Check the battery.
Picture dividing
Make sure the disc is clear and no any
scratch on it.
For the player is controlled by micro-
computer, if encountering problem, switch
off the power first, and switch
on again in
a few second, by then if no mistake notice
is displayed, the player could work well.
(label
remote
Notes on Condensation
Occasionally, condensation may occur within the device,
resulting in drops of water forming on the optical pick-up
inside the unit. This is much like the condensation that
takes place on a glass of cold water. This condensation
may affect the overall performance of the machine.
Condensation occurs when:
1) It is moved from a cold area to a warm area.
2) Its surrounding area is exposed to a sudden change
in temperature, for example, when located near an
air-conditioner.
3) In summer, the unit is moved from a hot and humid
environment immediately into an air-conditioned
room.
4) The device is in a humid environment.
10. CARE OF DISCS
Protection
a. When loading or removing the discs, always
hold them by the center and edge.
b. Do not stick or write anything on the surface.
Protect discs against any fingerprint.
Cleaning
Wipe the discs from time to time using a soft
cloth. Always wipe from the center toward the edge.
Storage
a. Never warp the discs. During non-sue periods,
store them in their cases, which should be kept
vertically. Do not expose discs to high temperature,
dampness or extremely low temperature, or else it
may cause damage to the discs
b. Do not expose discs to direct sunlight.
SAFE MODE
The main unit will be in safe mode if it does not
respond to any operation due to interference by
accident or strong noise signals. To resolve this
problem, you must pull out the power cord and
plug it in again later 10 seconds.