Roland SH-101 Parameter Guide
© 2021 Roland Corporation© 2021 Roland Corporation
SH-101
Model Expansion
Parameter Guide
0101
This document explains about the parameters and setting screens for the ZENOLOGY Pro
Model Expansion.
The parameter names, the order in which they appear and other information may dier,
depending on the product.
1
2 3 4 5 6
7 8
9
1
SystemSystem
CONDITION
Simulates the changes that occur as a unit ages.
PITCH DRIFT
Adjusts the slight pitch drift that occurs when notes are
played on an analog synthesizer.
KEY MODE
[SOLO] button
Sound is produced monophonically.
[POLY] button
Sound is produced polyphonically.
[UNISON] button
Sound is produced in unison.
[SL-UNISON] button
Sound is produced in monophonic unison.
PORTAMENTO [OFF] [ON]
[AUTO] buttons (PORTA MODE)
Turns portamento on/o. If this is on,
the pitch will change smoothly from
one note to the next-played note.
OFF: Regardless of the portamento
time setting, portamento is not
applied.
ON: Portamento is always applied.
AUTO: Portamento is applied only
when you play legato (pressing the
next key before completely releasing
the previously-played key). This lets
you use your playing technique to
control portamento on/o.
[ORIG] button
Change according to the original curve
of the model.
[LIN] button
Change in a linear curve.
[EXP-1] button
Change in a non-linear curve (gentle
slope).
[EXP-2] button
Change in a non-linear curve (steep
slope).
[PRM EXP] button
(PARAM EXPANSION)
If this is ON, the range of the LFO
RATE, CUTOFF, RESONANCE, and
FILTER ENV DEPTH parameters are
extended beyond the range of the
original model.
2
MODULATORMODULATOR
[WAVEFORM] knob (LFO WAVEFORM)
Selects the waveform of the LFO.
TRI, SQR, S&H
RATE (LFO RATE)
Species the rate of the LFO cycle.
Loading...