The VIMA lets you connect two microphones
for singing.
You can also adjust the tempo of the song for
more comfortable singing.
Enjoy karaoke with a music CD
You can enjoy karaoke by canceling the
vocal sounds of a commercially available
music CD and singing along. You can also
change the key of the song to a pitch that’s
more comfortable for the singer.
Apply effects to your voice
You can apply reverberation to your voice for
more enjoyable singing, similar to the echo
effect often used with karaoke microphones.
Easy and intuitive operation
Simple and functional design
The VIMA’s buttons are large and clearly
labeled, ensuring that operation is easy.
The operating buttons are also grouped by
function---a sensible design that lets you
quickly perform the operation you intend.
Perform music
Play using instrumental sounds suitable
for the song
When you play along while listening to one
of the VIMA’s songs, you can easily select
and play instrumental sounds that are suitable
for that song.
Play the melody along with a song
Using not only the songs built into the VIMA,
but also SMF music data, you can mute or
silence the melody and play it yourself.
Enjoy music more fully
Use CD-ROMs made for the VIMA (VIMA
TUNES) to increase your repertoire
CD-ROMs made for the VIMA (VIMA TUNES)
let you choose from a broad range of musical
styles in addition to the 34 songs that are built
into the VIMA.
You can sing along with a wide variety of
songs, and play along using instrumental
sounds that are suitable for each song.
Large display for great visibility and
easy operation
Lyrics and various settings are clearly
displayed in large characters.
201a
Before using this unit, carefully read the sections entitled: “USING THE
UNIT SAFELY” and “IMPORTANT NOTES” (pp.6–9). These sections
provide important information concerning the proper operation of the
unit. Additionally, in order to feel assured that you have gained a good
grasp of every feature provided by your new unit, Owner’s manual
should be read in its entirety. The manual should be saved and kept on
All rights reserved. No part of this publication may be reproduced in any
form without the written permission of ROLAND CORPORATION.
Page 3
Introduction
Thank you, and congratulations on your choice of the VIMA (RK-100). To ensure that you
obtain the maximum enjoyment and take full advantage of the VIMA’s functionality,
please read this owner’s manual carefully.
About the manual
The owner’s manual explains the basic operations you should understand in order to use
the VIMA’s performance capability, as well as more advanced operations that let you
connect various equipment to the VIMA so that you can enjoy music and video.
Conventions in this manual
In order to explain the operations as clearly as possible, this manual uses the following
conventions.
• Text enclosed in square brackets [ ] indicates the name of a controller, such as the
[ECHO] button.
• Text enclosed in angle brackets < > indicates text that appears in the screen, such as
<Tone List>.
• Lines that begin with
sure to read.
• The numbers of pages that you can turn to for additional, related information are
given like this: (p. **).
Note
or an asterisk * are cautionary statements that you must be
• Do not attempt to repair the unit, or replace parts
within it (except when this manual provides specific
instructions directing you to do so). Refer all
servicing to your retailer, the nearest Roland
Service Center, or an authorized Roland
distributor, as listed on the “Information” page.
• This unit should be used only with a stand that is
recommended by Roland.
The symbol alerts the user to important instructions or
warnings.The specific meaning of the symbol is
determined by the design contained within the triangle.
In the case of the symbol at left, it is used for general
cautions, warnings, or alerts to danger.
The symbol alerts the user to items that must never
be carried out (are forbidden). The specific thing that
must not be done is indicated by the design contained
within the circle. In the case of the symbol at left, it
means that the unit must never be disassembled.
The ● symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In
the case of the symbol at left, it means that the powercord plug must be unplugged from the outlet.
008c
• Be sure to use only the AC adaptor supplied with
the unit. Also, make sure the line voltage at the
installation matches the input voltage specified on
the AC adaptor’s body. Other AC adaptors may
use a different polarity, or be designed for a
different voltage, so their use could result in
damage, malfunction, or electric shock.
• Do not excessively twist or bend the power cord,
nor place heavy objects on it. Doing so can
damage the cord, producing severed elements and
short circuits. Damaged cords are fire and shock
hazards!
• This unit, either alone or in combination with an
amplifier and headphones or speakers, may be
capable of producing sound levels that could cause
permanent hearing loss. Do not operate for a long
period of time at a high volume level, or at a level
that is uncomfortable. If you experience any
hearing loss or ringing in the ears, you should
immediately stop using the unit, and consult an
audiologist.
• When using the unit with a rack recommended by
Roland, the stand must be carefully placed so it is
level and sure to remain stable. If not using a
stand, you still need to make sure that any location
you choose for placing the unit provides a level
surface that will properly support the unit, and
keep it from wobbling.
• Immediately turn the power off, remove the AC
adaptor from the outlet, and request servicing by
your retailer, the nearest Roland Service Center, or
an authorized Roland distributor, as listed on the
“Information” page when:
• In households with small children, an adult should
provide supervision until the child is capable of
following all the rules essential for the safe
operation of the unit.
• Do not force the unit’s power-supply cord to share
an outlet with an unreasonable number of other
devices. Be especially careful when using
extension cords—the total power used by all
devices you have connected to the extension cord’s
outlet must never exceed the power rating (watts/
amperes) for the extension cord. Excessive loads
can cause the insulation on the cord to heat up and
eventually melt through.
• Before using the unit in a foreign country, consult
with your retailer, the nearest Roland Service
Center, or an authorized Roland distributor, as
listed on the “Information” page.
• DO NOT play a CD-ROM disc on a conventional
audio CD player. The resulting sound may be of a
level that could cause permanent hearing loss.
Damage to speakers or other system components
may result.
• At regular intervals, you should unplug the AC
adaptor and clean it by using a dry cloth to wipe
all dust and other accumulations away from its
prongs. Also, disconnect the power plug from the
power outlet whenever the unit is to remain unused
for an extended period of time. Any accumulation
of dust between the power plug and the power
outlet can result in poor insulation and lead to fire.
• Should you remove the grounding screw, keep
them in a safe place out of children’s reach, so
there is no chance of them being swallowed
accidentally.
In addition to the items listed under “USING THE UNIT SAFELY” on page 6, please read and observe the
following:
Power Supply
301
• Do not connect this unit to same electrical outlet that is being
used by an electrical appliance that is controlled by an
inverter (such as a refrigerator, washing machine, microwave
oven, or air conditioner), or that contains a motor.
Depending on the way in which the electrical appliance is
used, power supply noise may cause this unit to malfunction
or may produce audible noise. If it is not practical to use a
separate electrical outlet, connect a power supply noise filter
between this unit and the electrical outlet.
302
• The AC adaptor will begin to generate heat after long hours
of consecutive use. This is normal, and is not a cause for
concern.
307
• Before connecting this unit to other devices, turn off the power
to all units. This will help prevent malfunctions and/or
damage to speakers or other devices.
Placement
351
• Using the unit near power amplifiers (or other equipment
containing large power transformers) may induce hum. To
alleviate the problem, change the orientation of this unit; or
move it farther away from the source of interference.
352a
• This device may interfere with radio and television reception.
Do not use this device in the vicinity of such receivers.
352b
• Noise may be produced if wireless communications devices,
such as cell phones, are operated in the vicinity of this unit.
Such noise could occur when receiving or initiating a call, or
while conversing. Should you experience such problems, you
should relocate such wireless devices so they are at a greater
distance from this unit, or switch them off.
354a
• Do not expose the unit to direct sunlight, place it near devices
that radiate heat, leave it inside an enclosed vehicle, or
otherwise subject it to temperature extremes. Excessive heat
can deform or discolor the unit.
355b
• When moved from one location to another where the temperature and/or humidity is very different, water droplets
(condensation) may form inside the unit. Damage or
malfunction may result if you attempt to use the unit in this
condition. Therefore, before using the unit, you must allow it
to stand for several hours, until the condensation has
completely evaporated.
358
• Do not allow objects to remain on top of the keyboard. This
can be the cause of malfunction, such as keys ceasing to
produce sound.
360
• Depending on the material and temperature of the surface on
which you place the unit, its rubber feet may discolor or mar
the surface.
You can place a piece of felt or cloth under the rubber feet to
prevent this from happening. If you do so, please make sure
that the unit will not slip or move accidentally.
Maintenance
401a
• For everyday cleaning wipe the unit with a soft, dry cloth or
one that has been slightly dampened with water. To remove
stubborn dirt, use a cloth impregnated with a mild, nonabrasive detergent. Afterwards, be sure to wipe the unit
thoroughly with a soft, dry cloth.
402
• Never use benzine, thinners, alcohol or solvents of any kind,
to avoid the possibility of discoloration and/or deformation.
Handling CD-ROMs
801
• Avoid touching or scratching the shiny underside (encoded
surface) of the disc. Damaged or dirty CD-ROM discs may
not be read properly. Keep your discs clean using a commercially available CD cleaner.
Repairs and Data
452
• Please be aware that all data contained in the unit’s memory
may be lost when the unit is sent for repairs. Important data
should always be written down on paper (when possible).
During repairs, due care is taken to avoid the loss of data.
However, in certain cases (such as when circuitry related to
memory itself is out of order), we regret that it may not be
possible to restore the data, and Roland assumes no liability
concerning such loss of data.
8
Page 9
IMPORTANT NOTES
Additional Precautions
551
• Please be aware that the contents of memory can be
irretrievably lost as a result of a malfunction, or the improper
operation of the unit. To protect yourself against the risk of
loosing important data, we recommend that you periodically
save a backup copy of important data you have stored in the
unit’s memory by writing down on paper (when possible).
552
• Unfortunately, it may be impossible to restore the contents of
data that was stored in the unit’s memory once it has been
lost. Roland Corporation assumes no liability concerning such
loss of data.
553
• Use a reasonable amount of care when using the unit’s
buttons, sliders, or other controls; and when using its jacks
and connectors. Rough handling can lead to malfunctions.
554
• Never strike or apply strong pressure to the display.
556
• When connecting / disconnecting all cables, grasp the
connector itself—never pull on the cable. This way you will
avoid causing shorts, or damage to the cable’s internal
elements.
558a
• To avoid disturbing your neighbors, try to keep the unit’s
volume at reasonable levels. You may prefer to use
headphones, so you do not need to be concerned about
those around you (especially when it is late at night).
559a
• When you need to transport the unit, package it in the box
(including padding) that it came in, if possible. Otherwise,
you will need to use equivalent packaging materials.
560
• Do not apply undue force to the music rest while it is in use.
561
• Use only the specified expression pedal (EV-5; sold
separately). By connecting any other expression pedals, you
risk causing malfunction and/or damage to the unit.
562
• Some connection cables contain resistors. Do not use cables
that incorporate resistors for connecting to this unit. The use
of such cables can cause the sound level to be extremely low,
or impossible to hear. For information on cable specifications, contact the manufacturer of the cable.
985
• The explanations in this manual include illustrations that
depict what should typically be shown by the display. Note,
however, that your unit may incorporate a newer, enhanced
version of the system (e.g., includes newer sounds), so what
you actually see in the display may not always match what
appears in the manual.
203
* GS () is a registered trademark of Roland
Corporation.
* XG lite () is a registered trademark of Yamaha
Corporation.
204
* Microsoft and Windows are registered trademarks of
Microsoft Corporation.
206j
* Windows® is known officially as: “Microsoft® Windows®
operating system.”
207
* Apple and Macintosh are registered trademarks of Apple
Computer, Inc.
209
* Mac OS is a trademark of Apple Computer, Inc.
220
* All product names mentioned in this document are
trademarks or registered trademarks of their respective
owners.
9
Page 10
Names of things and what they do
678
9
Top Panel
2
5711
1
68
16
1
[Power On] switch
Turns the power on/off (p. 14).
2
EXT IN
Here you can connect a DVD player or other video
device, and view the images on an external display or
play back music (p. 51, p. 52).
3
VOCAL
Here you can apply echo to the sound from the
microphone (p. 48), and adjust the microphone volume
(p. 46).
3
4
9
13
14
12
10
15
[BALANCE] knob
Adjusts the volume balance between the song and the
keyboard (p. 38).
When playing along with a song, you can use this to
turn down the song volume.
MELODY
Here you can soften or mute the melody or vocal sound
of a song (p. 41, p. 42).
You can lower the volume of the melody or vocal of a
song and enjoy karaoke, or temporarily mute the melody
and play it yourself.
4
[TEMPO] knob
Adjusts the tempo of the song (p. 21).
Allows you to change the tempo of a song so it’s easier
to sing or play.
5
[VOLUME] knob
Adjusts the overall volume of the VIMA (p. 15).
If headphones are connected, this adjusts the
headphone volume (p. 16).
These buttons let you shift the key of the keyboard or
song (p. 47).
This lets you transpose a song for easier singing, or
transpose the keyboard without changing your fingering.
[DISPLAY CONTRAST] knob
Adjusts the brightness of the display.
10
KEY CONTROL
Page 11
151617
17
Names of things and what they do
10
[DEMO] button
Plays the demo song (p. 18).
11
[MENU] button
Lets you make various settings for the VIMA (p. 55).
12
Display
Here you can select songs and make a variety of
settings. The display also shows the tempo and the name
of the selected song.
13
SONG
Here you can select songs (p. 19, p. 23, p. 27, p. 31).
You can also register a favorite or frequently played
song (p. 30), or remove a song from the favorites list (p.
32).
14
PLAYER
Here you can play back the VIMA’s internal songs,
songs from a CD-ROM, or songs you’ve saved in
Favorites (p. 19, p. 30).
You can also sound a “count” to help you start singing
at the correct timing (p. 37).
INSTRUMENT
Here you can select the sound you’ll hear when you play
the keyboard (p. 33).
CD drive
This drive lets you play CD-ROMs made for the VIMA
(VIMA TUNES), as well as commercially available music
CDs and CD-ROM discs containing SMF music data (p.
22, p. 26).
VOCAL jacks
Here you can connect microphones. The VIMA lets you
use two mics simultaneously, so two people can sing
together (p. 45).
11
Page 12
Names of things and what they do
23
24
25
26
Rear Panel
18
2420
19
18
USB connector
You can connect this to your computer for transferring
performance data (p. 54).
19
MIDI IN/OUT connectors
You can connect these to external MIDI devices to
transfer performance data (p. 53).
This lets you control an external device from the VIMA,
or send data to an external sequencer for storage.
20
EXPRESSION PEDAL jack
You can connect a separately available expression
pedal (EV-5) to this jack and use it to add expression to
the sound (p. 39).
21
DAMPER PEDAL jack
You can connect a separately sold damper pedal (such
as the DP Series), and press it to sustain the notes you
play (p. 40).
22
VIDEO OUTPUT/AUDIO OUTPUT L/R jacks
Here you can connect a television to view video (p. 52),
or connect external speakers to reproduce the sounds of
the VIMA (p. 50).
24262125
2223
PHONES jacks
Here you can connect headphones. The VIMA lets you
use two sets of headphones simultaneously (p. 16).
* The volume may be reduced if you use two sets of
Ground terminal
927
Depending on the circumstances of a particular setup, you
may experience a discomforting sensation, or perceive that
the surface feels gritty to the touch when you touch this
device, microphones connected to it, or the metal portions
of other objects. This is due to an infinitesimal electrical
charge, which is absolutely harmless. However, if you are
concerned about this, connect the ground terminal with an
external ground. When the unit is grounded, a slight hum
may occur, depending on the particulars of your
installation. If you are unsure of the connection method,
contact the nearest Roland Service Center, or an authorized
Roland distributor, as listed on the “Information” page.
Unsuitable places for connection
• Water pipes (may result in shock or electrocution)
• Gas pipes (may result in fire or explosion)
• Telephone-line ground or lightning rod (may be
DC IN jack
Connect the included AC adaptor here (p. 14).
headphones simultaneously.
dangerous in the event of lightning)
Cord hook
Use this to fasten the AC adaptor cord (p. 14).
12
Page 13
3
4
Main screen
Names of things and what they do
1
2
1
SONG/LYRIC
The name of the currently selected song is shown here in
large characters.
2
SONG LOCATION
Here you can select the location in which the desired
song is saved (the “song location”).
•PRESETS (internal songs)
•CD-ROM
•CD (music CD)
•FAVORITES
3
4
KEY
This indicates the key control setting.
When you change the key, this will affect the key of both
the keyboard and the song.
TEMPO
This indicates the tempo.
13
Page 14
Before you play
NOTE
NOTE
Getting ready to play
Connecting the power cord
1.
Make sure that the [Power On] switch located
at the left side of the keyboard is off (in the
upward position).
2.
Connect the AC adaptor to the VIMA, and plug
the power cord into an AC outlet.
You must use the power cord included with the VIMA.
fig.ACcord-e.eps
Cord Hook
Turning the power on/off
941
Once you’ve got everything connected properly, you can
turn on the power using the following procedure. If you
fail to perform these steps in the correct order, you risk
causing a malfunction or damaging your speakers.
Turning the power on
Turn the [VOLUME] knob all the way toward
1.
the left to minimize the volume.
fig.VolumeMin-e.eps
2.
Press the [Power On] switch.
fig.PowerOn-e.eps
To the
Power
Outlet
The cord of
the supplied
AC Adaptor
924
* To prevent the inadvertent disruption of power to your unit
(should the plug be pulled out accidentally), and to avoid
applying undue stress to the DC IN jack, anchor the power
cord using the cord hook, as shown in the illustration.
942
Due
to a circuitry protection feature, this unit requires
a few moments after power is turned on before it is
ready for normal operation.
Use the [VOLUME] knob to adjust the volume
3.
(p. 15).
Turning the power off
1.
Turn the [VOLUME] knob all the way toward
the left to minimize the volume.
fig.VolumeMin-e.eps
14
Press the [Power On] switch.
2.
The screen goes blank and the power is turned off.
Page 15
Before you play
NOTE
Adjusting the volume
Here’s how to adjust the volume of your keyboard playing or
the playback volume of an internal song or CD song.
If headphones are connected, use the [VOLUME] knob to
adjust the headphone volume.
Turn the [VOLUME] knob to adjust the overall
1.
volume.
Adjust the volume while you play the keyboard to
produce sound.
fig.MasterVolume-e.eps
→
The microphone volume is adjusted with the VOCAL
[LEVEL] knob (p. 46).
Attaching the music rest
Here’s how to attach the included music rest.
1.
Insert the included music rest into the VIMA as
shown in the illustration.
fig.MusicRestScrew.eps
When attaching the music rest, you must use your hand
to support it firmly so that it does not fall. Be careful not
to pinch your hand.
Don’t apply excessive force to the installed music rest.
15
Page 16
Before you play
Listening through headphones
Since the VIMA has two headphone jacks, two people can use
headphones simultaneously. You can also use headphones to
enjoy the VIMA without disturbing those around you, such as
at night.
If you’re using only one set of headphones, you may connect
them to either of the two headphone jacks.
* The volume may be reduced if you use two sets of
headphones simultaneously.
fig.Headphones-e.eps
Headphones
1.
Plug the headphones into the PHONES jack
located at the VIMA’s rear panel.
If headphones are connected, no sound will be output
from the VIMA’s speakers.
Adjusting the brightness
of the display
You can adjust the brightness of the VIMA’s display.
1.
To adjust the brightness, turn the [DISPLAY
CONTRAST] knob located at the left of the
VIMA’s display.
fig.Contrast-e.eps
Cautions regarding the LCD display
• You may notice vertical stripes in the screen; these
artifacts are due to the way in which a liquid crystal
display is constructed, and do not indicate a malfunction.
By using the [DISPLAY CONTRAST] knob to adjust the
brightness, you can minimize the visibility of these
artifacts.
• The brightness may be affected by the temperature.
Use the VIMA’s [VOLUME] knob (p. 15) to
2.
adjust the headphone volume.
Caution when using headphones
• To prevent damage to the cord’s internal conductors,
avoid rough handling. When using headphones, mainly
try to handle either the plug or the headset.
• Your headphones may be damaged if the volume of a
device is already turned up when you plug them in.
Minimize the volume before you plug in the headphones.
• Excessive input will not only damage your hearing, but
may also strain the headphones. Please enjoy music at an
appropriate volume.
• Use headphones that have a stereo 1/4” phone plug.
16
Page 17
Listening on the VIMA
Songs you can play using the VIMA
You can listen to the internal songs, songs from the included CD-ROM, or commercially
available music data.
Use the [LOCATION] buttons to select the location that contains the song you want to
hear.
For details on how to play back these songs, refer to the explanations below.
What you can play
Demo songs
PresetsThe VIMA has 34 built-in songs.
Songs stored in “FAVORITES”You can store internal songs or songs from a CD-ROM in “FAVORITES”
CD-ROM included with the
VIMA
CD-ROMs made for the VIMAYou can play back commercially available CD-ROMs made for the VIMA
Music CDYou can play back commercially available music CDs.
Explanation
You can play back a demo song that let’s you experience the VIMA’s
beautiful sounds.
You can also view the lyrics in the VIMA’s screen while the song plays.
and listen to them.
The CD-ROM included with the VIMA contains 12 songs.
You can also view the lyrics in the VIMA’s screen while the song plays.
(VIMA TUNES).
You can also view the lyrics in the VIMA’s screen while the song plays.
* This instrument (RK-100) is not able to play back VIMA TUNES
images.
What is Location?
On the VIMA, “Location” refers to a place where songs can be found, such as
“PRESETS (internal songs),” “FAVORITES,” or “CD-ROM.”
17
Page 18
Listening on the VIMA
Listening to the demo song
Here’s how you can play back a demo song that lets you experience the VIMA’s beautiful
sounds.
Use the [VOLUME] knob to adjust the volume (p. 15).
1.
Press the [DEMO] button so it’s lit.
2.
fig.Demo-e.eps
The demo song begins playing.
When playback reaches the end of the song, it will resume again from the beginning.
Press the [DEMO] button once again to stop playback.
3.
18
Page 19
Listening to internal songs
The VIMA contains 34 internal songs.
Here’s how to select and play back one of these songs.
Selecting a song
fig.Panel-Preset-e.eps
Listening on the VIMA
4, 5
1.
2.
fig.Location-preset-i-e.eps
1
2
Make sure that the [DEMO] button and [MENU] button are unlit.
If either is lit, press the button to turn it off.
Use the [LOCATION] buttons to select <PRESETS>.
3
The VIMA’s screen will show a list of the internal songs.
Turn the SONG [SELECT] knob to select the song that you want to play.
3.
19
Page 20
Listening on the VIMA
Playing the song
Press the [PLAY/STOP] button.
4.
The selected song will play.
Panel [] button and [] button
Depending on whether the song is stopped or playing, the [] button and []
button will do the following.
When the song is stopped
[] button Returns to the beginning of the song.
[] button Selects the next song.
When the song is playing
Pressing this button at the beginning of a song will select the
preceding song.
[] button Returns to the beginning of the playing song.
[] button Selects the next song.
Stopping the song
Press the [PLAY/STOP] button once again.
5.
• You can also play back commercially available music CDs.
• If there’s a song that you’re practicing or that you particularly like, you can save it
in “Favorites” for easy access.
→ “Internal Song List” (p. 69)
→ “Listening to songs from a CD-ROM” (p. 22)
Pressing this button at the beginning of a song will select the
preceding song.
Hold down this button to rewind the song.
Hold down this button to fast-forward the song.
20
→ “Listening to songs from a music CD” (p. 26)
→ “Listening to songs saved in “Favorites”” (p. 30)
Page 21
Changing the tempo of a song
Here’s how to change the tempo of a song.
If a song is too fast for you to play or sing along comfortably, you can slow it down to a
more comfortable tempo.
Changing the tempo will not affect the pitch. You can also change the tempo even while
the song is playing.
Turn the [TEMPO] knob to adjust the tempo.
1.
Turning the [TEMPO] knob toward the left (“SLOW”) will slow down the tempo, and
turning it toward the right (“FAST”) will speed up the tempo.
You can adjust the tempo in a range between half and double the original tempo
(however, limited to a range between 20 and 250 quarter notes per minute).
fig.tempo.eps
Listening on the VIMA
21
Page 22
Listening on the VIMA
Listening to songs from a CD-ROM
You can play back songs from a CD-ROM containing SMF music data, the CD-ROM
included with the VIMA, or a CD-ROM made for the VIMA (VIMA TUNES).
Inserting the CD-ROM into the CD drive
Press the [CD EJECT] button to open the disc tray.
1.
fig.disc-tray-e.eps
Disc Tray
CD Eject Button
Place the CD-ROM on the disc tray.
2.
Press the [CD EJECT] button to close the disc tray.
3.
NOTE
NOTE
After you close the disc tray, a certain amount of time will be required for the CD-ROM
to load.
The display backlight may flicker when the CD drive motor operates.
22
Page 23
Selecting a song from CD-ROM
fig.Panel-CDROM-e.eps
1
Listening on the VIMA
4, 5
1.
2.
fig.Location-cdrom-i-e.eps
2
Make sure that the [DEMO] button and [MENU] button are unlit.
If either is lit, press the button to turn it off.
Use the [LOCATION] buttons to select <CD-ROM>.
3
The VIMA’s screen will show a list of the songs on the CD-ROM.
Turn the SONG [SELECT] knob to select the song that you want to play.
3.
23
Page 24
Listening on the VIMA
Playing a song from a CD-ROM
Press the [PLAY/STOP] button.
4.
The selected song will play.
Panel [] button and [] button
Depending on whether the song is stopped or playing, the [] button and []
button will do the following.
When the song is stopped
[] button Returns to the beginning of the song.
Pressing this button at the beginning of a song will select the
preceding song.
[] button Selects the next song.
When the song is playing
[] button Returns to the beginning of the playing song.
[] button Selects the next song.
Stopping the song
Press the [PLAY/STOP] button once again.
5.
Pressing this button at the beginning of a song will select the
preceding song.
Hold down this button to rewind the song.
By pressing the [] button while rewinding, you can rewind
more rapidly.
Hold down this button to fast-forward the song.
By pressing the [] button while fast-forwarding, you can fastforward more rapidly.
24
• You can also play the VIMA’s internal songs or commercially available music CDs.
• If there’s a song that you’re practicing or that you particularly like, you can save it
in “Favorites” for easy access.
→ “Listening to internal songs” (p. 19)
→ “Listening to songs from a music CD” (p. 26)
→ “Listening to songs saved in “Favorites”” (p. 30)
Page 25
Removing the CD-ROM
Press the [CD EJECT] button to open the disc tray.
1.
Remove the CD-ROM from the disc tray.
2.
If the disc tray does not open
If, due to a power failure or other problem, the disc tray fails to open when you press
the [CD EJECT] button, switch off the RK-100’s power, then insert a straightened paper
clip or similar object into the emergency eject hole to forcibly open the disc tray.
fig.Eject Hole-e.eps
Listening on the VIMA
NOTE
Emergency Eject Hole
The emergency eject hole must be used only when the VIMA’s power is switched
OFF. Using it while the power is on may damage the disc or cause serious problems.
25
Page 26
Listening on the VIMA
Listening to songs from a music CD
You can also play back commercially available music CDs.
Inserting the music CD into the CD drive
Press the [CD EJECT] button to open the disc tray.
1.
fig.disc-tray-e.eps
Disc Tray
CD Eject Button
Place the CD on the disc tray.
2.
Press the [CD EJECT] button to close the disc tray.
3.
NOTE
NOTE
After you close the disc tray, a certain amount of time will be required for the music CD
to load.
The display backlight may flicker when the CD drive motor operates.
26
Page 27
Selecting a song from a music CD
fig.Panel-CD-e.eps
1
Listening on the VIMA
4, 5
1.
2.
fig.Location-cd-i-e.eps
2
Make sure that the [DEMO] button and [MENU] button are unlit.
If either is lit, press the button to turn it off.
Use the [LOCATION] buttons to select <CD>.
3
The VIMA’s display will indicate the track numbers of the songs on the music CD.
Turn the SONG [SELECT] knob to select the song that you want to play.
3.
27
Page 28
Listening on the VIMA
Playing a song from a music CD
Press the [PLAY/STOP] button.
4.
The selected song will play.
Panel [] button and [] button
Depending on whether the song is stopped or playing, the [] button and []
button will do the following.
When the song is stopped
[] button Returns to the beginning of the song.
Pressing this button at the beginning of a song will select the
preceding song.
[] button Selects the next song.
When the song is playing
[] button Returns to the beginning of the playing song.
[] button Selects the next song.
Stopping the song
Press the [PLAY/STOP] button once again.
5.
Pressing this button at the beginning of a song will select the
preceding song.
Hold down this button to rewind the song.
By pressing the [] button while rewinding, you can rewind
more rapidly.
Hold down this button to fast-forward the song.
By pressing the [] button while fast-forwarding, you can fastforward more rapidly.
28
Songs from a music CD can’t be saved in “Favorites.”
Page 29
Removing the CD
Press the [CD EJECT] button to open the disc tray.
1.
Remove the CD from the disc tray.
2.
If the disc tray does not open
If, due to a power failure or other problem, the disc tray fails to open when you press
the [CD EJECT] button, switch off the RK-100’s power, then insert a straightened paper
clip or similar object into the emergency eject hole to forcibly open the disc tray.
fig.Eject Hole-e.eps
Listening on the VIMA
NOTE
Emergency Eject Hole
The emergency eject hole must be used only when the VIMA’s power is switched
OFF. Using it while the power is on may damage the disc or cause serious problems.
29
Page 30
Listening on the VIMA
Listening to songs saved in “Favorites”
If there’s a song that you particularly like or listen to often, you can register it in
“Favorites” for easy access.
What is “Favorites”?
This is a storage area in which you can save songs from a CD-ROM or from presets.
If you’ve saved a song in “Favorites,” you can simply choose “Favorites” and select
that song at any time.
Since songs saved in “Favorites” will not disappear even if the power is turned off,
you will find it convenient to save songs that you want to hear frequently.
Saving a song in “Favorites” (Copy)
1.
2.
3.
fig.Location-okini-i-e.eps
Get ready to save the song.
If you’re going to save a song from CD-ROM, insert the CD-ROM into the CD drive.
Songs from a music CD can’t be saved in “Favorites.”
Select the song that you want to save in “Favorites.”
Press the [COPY] button.
The currently selected song will be saved in “Favorites.”
A “*” symbol is shown for the names of songs you’ve saved.
NOTE
Don’t remove the CD-ROM until the song has been saved. Also, you must never turn off
the power until the song has been saved. Doing so will damage the VIMA’s internal
memory, rendering it unusable.
30
NOTE
NOTE
You can save up to 99 songs in “Favorites.” However, if the remaining amount of space
is insufficient, an error message (p. 63) will appear and you won’t be able to save
another song even though fewer than 99 songs have been saved. In this case, if you
delete some of the songs in “Favorites” you’ll be able to save more songs (p. 32).
Approximately one minute of processing time may be required when you save a song in
“Favorites.”
If you want to erase all of the content saved in “Favorites” and restore the VIMA to its
factory-set condition, refer to “Restoring the factory-set condition (Factory Reset)” (p. 58).
Page 31
Playing a song from “Favorites”
Selecting a song
fig.Panel-okini-e.eps
1
Listening on the VIMA
4, 5
1.
2.
fig.Location-okini-i-e.eps
2
3
Make sure that the [DEMO] button and [MENU] button are unlit.
If either is lit, press the button to turn it off.
Use the [LOCATION] buttons to select <FAVORITES>.
Alternatively, press the [CALL] button.
The VIMA’s screen will show a list of the songs saved in “Favorites.”
Turn the SONG [SELECT] knob to select the song that you want to play.
3.
NOTE
If no songs have been saved in “Favorites,” no song list will appear when you choose
“Favorites” as the song location.
31
Page 32
Listening on the VIMA
Playing a song
Press the [PLAY/STOP] button.
4.
The selected song will play.
Stopping the song
Press the [PLAY/STOP] button once again.
5.
Deleting a song from “Favorites”
Select the song that you want to delete (p. 31).
1.
Simultaneously press the [COPY] button and [CALL] button.
2.
NOTE
Never turn off the power while the screen indicates “Now processing...”
32
Page 33
Playing the VIMA
Selecting the sound played from the keyboard
The VIMA has seven INSTRUMENT buttons. Press one of these buttons to select the sound
you’ll play from the keyboard.
fig.tone-button-e.eps
Affixing the included note name label
fig.tone-button-e.eps
If desired, you can affix the included note ID label (two types) or drum sheet (one
label) in the locations shown below.
You may find this a helpful way to remember the note names, or useful when playing
percussion instrument sounds.
Drum Key-Map Label
Note ID Label (Left)
Note ID Label (Right)
You can play two different sounds by pressing two INSTRUMENT buttons simultaneously.
For example, if you press the [ORGAN] button while holding down the [PIANO] button,
a piano sound will play at the right side of the keyboard, while an organ sound will be
heard from the left.
33
Page 34
Playing the VIMA
Playing sound effects or percussion instruments from the keyboard
You can play sound effects or percussion instrument sounds from the keyboard.
Press the [DRUMS] button so it’s lit.
1.
Play notes in the C2–B3 range on the keyboard.
2.
The white keys in the C2–B3 range will play drum sounds. The black keys in the C 2 to
B 3 range will play sound effects.
Keys in the C4–C7 range will play the sound that was selected before the [DRUMS]
button was pressed.
For example, if you had pressed the [PIANO] button and were playing the piano sound,
and then pressed the [DRUMS] button, the keyboard will play the following sounds.
fig.DrumSound-e.eps
Drum soundsPiano sound
C2B3 C4C7
Muting the percussion instrument sounds
Press the [DRUMS] button to turn it off.
3.
34
Page 35
Performing with sounds that match the song
(Recommended Tone)
If you’ve selected a preset (internal) song or a song from a CD-ROM made for the VIMA
(VIMA TUNES), you can conveniently select “recommended” sounds that are suitable for
that song.
Choosing the Recommended tones
fig.Panel-osusume-e.eps
Playing the VIMA
1.
2.
3.
fig.menu-osusume-e.eps
1
23
4
Press the [MENU] button so it’s lit.
The Setup Menu screen appears.
Use the [LOCATION] buttons to select <Recommended Tone>.
Turn the SONG [SELECT] knob to turn the <Recommended Tone> setting
<On>.
Press the [MENU] button to turn it off.
4.
Play along with the song.
5.
When you press the [SCAT] button, [CHOIR] button, or [VIBRAPHONE] button, an
instrument suitable for the selected song will automatically assigned to the keyboard.
35
Page 36
Playing the VIMA
Returning to the previous state
Press the [MENU] button so it’s lit.
1.
The Setup Menu appears.
Use the [LOCATION] buttons to select <Recommended Tone>.
2.
Turn the SONG [SELECT] knob to turn the <Recommended Tone> setting
3.
<Off>.
Press the [MENU] button to turn it off.
4.
You’re returned to the previous screen.
In this state, pressing the [SCAT] button, [CHOIR] button, or [VIBRAPHONE] button will
select the corresponding instrument.
36
Page 37
Sounding a count to keep your timing accurate
You can make the VIMA sound a count at the end of the song’s introduction (i.e., before
you begin playing). If you listen to this count, it will be easier for you to begin playing or
singing along with the song at the correct timing.
fig.CountDown-e.eps
The introduction
1.
fig.Count-e.eps
Example) A song in 4/4 time
Intro
1234
Count sounds
Press the [COUNT] button so it’s lit.
ends, and the
melody begins.
Playing the VIMA
This enables the count to sound.
A one-measure count sounds before the melody begins.
Stopping the count from sounding
Press the [COUNT] button to turn it off.
1.
The count will not sound if you’re playing a song that does not contain count data (such
as a music CD).
37
Page 38
Playing the VIMA
Adjusting the volume balance between the song and keyboard
You can adjust the volume balance between the song that’s playing and your
performance on the keyboard.
If you’re performing along with the playback of a song, lowering the volume of the song
will make it easier for you to hear your own keyboard performance.
Turn the [BALANCE] knob to adjust the volume balance.
1.
fig.Balance-e.eps
Operation
Turning the [BALANCE] knob toward “SONG”
Turning the [BALANCE] knob toward “KEYBOARD”Decreases the volume of the song.
Explanation
Decreases the volume of the keyboard.
38
Page 39
Playing the VIMA
Using an expression pedal to make your performance expressive
You can connect an expression pedal (sold separately) and use it to adjust the volume.
By adjusting the volume while you play, you can add dynamic expression to your
performance.
The volume increases as you push forward on the pedal, and decreases as you release
the pedal.
fig.ConnectExp-e.eps
EV-5
Connect the expression pedal to the EXPRESSION PEDAL jack located on
1.
the rear panel of the VIMA.
NOTE
Operate the expression pedal while you play the keyboard.
2.
The volume of notes you play on the keyboard will change, allowing you to apply
expression to your performance.
NOTE
You must use only the specified expression pedal (EV-5; sold separately). Connecting a
product made by another manufacturer may cause the VIMA to malfunction.
The drum volume will not change.
39
Page 40
Playing the VIMA
Using a damper pedal to play smoothly
You can connect a damper pedal (sold separately) to help you play notes smoothly. As
long as you hold down the damper pedal, notes will be sustained even after you take
your finger off the key, causing the sound to decay slowly.
On acoustic pianos, pressing the damper pedal will cause sympathetic vibration to occur
in strings other than the strings of the notes you actually played, producing a rich
resonance. The VIMA simulates these sympathetic vibrations (damper resonance).
fig.ConnectDmp-e.eps
DP series
Connect the damper pedal to the DAMPER PEDAL jack located on the rear
1.
panel of the VIMA.
925
NOTE
Press the damper pedal while you play the keyboard.
2.
The notes you play on the keyboard will be sustained, producing a smoother
performance.
You must use only the specified damper pedal (DP series; sold separately). Connecting a
product made by another manufacturer may cause the VIMA to malfunction.
40
Page 41
Muting the melody from a song (Melody Mute)
You can play back a preset (internal) song or a song from a CD-ROM made for the VIMA
(VIMA TUNES) with the melody portion muted. This is called the “Melody Mute” function.
While listening to the song, you can play the melody yourself.
There’s also a “Melody Guide” function (p. 42), which lets you decrease the volume of
the melody so that you can practice playing the melody along with the song, but still
hear the melody until you’ve learned it.
Prepare to play back the desired song.
1.
If you want to play back a song from a CD-ROM, insert the CD-ROM into the CD drive
(p. 22).
Select the song that you want to play (p. 19, p. 22).
2.
Playing the VIMA
3.
fig.CentereCancel-e.eps
4.
Press the [MUTE/CENTER CANCEL] button so it’s lit.
The Melody Mute function is turned on.
Press the [PLAY/STOP] button to play back the song.
When the song plays, the sound of the melody will be temporarily muted.
Play the melody yourself while listening to the other parts of the song.
NOTE
If the melody is not muted when you press the MELODY [MUTE/CENTER CANCEL]
button, change the melody channel setting as it will depend on the song.
→
“Changing the melody channel (Melody Channel)” (p. 57)
To cancel the Melody Mute function
Press the [MUTE/CENTER CANCEL] button to turn it off.
1.
The Melody Mute function is turned off.
When you play back the song, the melody will return to its original volume.
41
Page 42
Playing the VIMA
Playing while you listen to the song melody (Melody Guide)
You can play back a preset (internal) song or a song from a CD-ROM made for the VIMA
(VIMA TUNES) with the melody at a lower volume. This is called the “Melody Guide”
function. Until you’ve learned the melody, you can play back the song with the melody
at a lower volume, and practice your performance.
Once you’ve learned the melody, use the Melody Mute function (p. 41) to perform with
the melody completely muted.
Prepare to play back the desired song.
1.
If you want to play back a song from a CD-ROM, insert the CD-ROM into the CD drive
(p. 22).
Select the song that you want to play (p. 19, p. 22).
2.
3.
fig.MelodyGuide-e.eps
4.
Press the MELODY [GUIDE] button so it’s lit.
The Melody Guide function is turned on.
Press the [PLAY/STOP] button to play back the song.
When the song plays back, the volume of the melody will be temporarily lowered.
While listening to the song, play along with the melody. The melody will be heard at a
lower volume, so you can use it as a guide.
NOTE
If the volume of the melody does not decrease when you press the MELODY [GUIDE]
button
, change the melody channel setting as it will depend on the song.
→
“Changing the melody channel (Melody Channel)” (p. 57)
To cancel the Melody Guide function
Press the MELODY [GUIDE] button to turn it off.
1.
The Melody Guide function is turned off.
When you play back the song, the melody will return to its original volume.
42
Page 43
Performing with your favorite sounds (Tone List)
The VIMA contains the sounds of numerous instruments in addition to the seven sounds
accessible through the INSTRUMENT buttons.This lets you enjoy performing with sounds
that are appropriate with a wide range of musical styles.
Selecting instruments
fig.Panel-tonelist-e.eps
Playing the VIMA
1.
2.
3.
fig.menu-tonelist-e.eps
1
4
Press the [MENU] button so it’s lit.
The Setup Menu screen appears.
Use the [LOCATION] buttons to select <Tone List>.
Turn the SONG [SELECT] knob to turn the <Tone List> setting <On>.
23
5
4.
fig.menu-tonelist-e.eps
5.
6.
Press the [MENU] button to turn it off.
The Tone List screen appears.
Turn the SONG [SELECT] knob to select an instrument.
By pressing a [LOCATION] button you can choose the first sound in each instrument group.
Play the keyboard.
You’ll hear the instrument you selected.
43
Page 44
Playing the VIMA
Returning to the previous state
Press the [MENU] button so it’s lit.
1.
The Setup Menu screen appears.
Use the [LOCATION] buttons to select <Tone List>.
2.
Turn the SONG [SELECT] knob to turn the <Tone List> setting <Off>.
3.
Press the [MENU] button to turn it off.
4.
You’re returned to the previous screen.
44
Page 45
Singing along with the VIMA
You can connect a microphone to the microphone jack and use the VIMA for karaoke or
for singing along with your own playing. Since the VIMA has two microphone jacks, you
can connect two mics simultaneously for a duet.
You can also apply echo to the sound of the microphone for additional enjoyment.
Connecting a microphone
Plug the mic(s) into the VOCAL jack(s) located at the right of the VIMA’s
1.
front panel.
If you’re using only one microphone, you may connect it to either of the two VOCAL
jacks.
fig.ConnectMic-e.eps
983
Cautions when using a microphone
• Be careful of the volume late at night or early in the morning.
• Lower the volume before you connect a microphone to the VIMA. If the volume is raised when you
connect a microphone, noise may be output from the speakers.
• Acoustic feedback (a squealing noise) may occur depending on the position of the microphone and
speakers. If this happens, take the following steps.
• Point the microphone in a different direction
• Move the microphone away from the speakers
• Lower the volume
45
Page 46
Singing along with the VIMA
Adjusting the volume of the microphone
You can adjust the volume of the sound from the microphone.
If two mics are connected, this will change the volume of both mics.
Turn the [VOLUME] knob to adjust the overall volume (p. 15).
1.
If you’re singing along with the song, adjust the song volume by turning the [VOLUME]
knob while the song plays.
If you’re playing the keyboard while you sing, adjust the keyboard volume by turning the
[VOLUME] knob while you play the keyboard.
Turn the panel VOCAL [LEVEL] knob to adjust the microphone volume.
2.
Turning the VOCAL [LEVEL] knob toward the left will lower the microphone volume, and
turning it toward the right will raise the microphone volume.
fig.MicVolume-e.eps
NOTE
NOTE
You cannot adjust the volume of the two microphones individually.
When you do not need to use a microphone, rotate the VOCAL [LEVEL] knob all the way
to the left. This is to prevent noise from occurring.
46
Page 47
Singing along with the VIMA
Changing the song to a key that’s comfortable for singing
(Key Control)
The “Key Control” function lets you play back a song at a different key. This is convenient
when you’re singing along with the song, since you can shift the playback to a key that’s
comfortable for the range of your voice.
You can also use this function to transpose the pitch of your playing without changing
your fingering on the keyboard. For example, if the song is in a difficult key with
numerous sharps ( ) or flats ( ), you can transpose to a key that’s easier for you to play.
Use the KEY CONTROL [ ] [ ] buttons to change the key (pitch).
1.
Each time you press a KEY CONTROL [ ] [ ] button, the key is changed by a semitone.
Pressing the [ ] button lowers the key, and pressing the [ ] button raises the key.
The value you specify is shown in the screen.
fig.KeyControl-e.eps
You can adjust the value in semitone steps over a range of -6--+5.
You can return to the original key by pressing the [ ] button and [ ] button
simultaneously.
47
Page 48
Singing along with the VIMA
Adding echo to vocals
You can add echo to vocals arriving via the microphone. This will make singing more
enjoyable.
fig.VocalEcho-e.eps
Press the VOCAL [ECHO] button so it’s lit.
1.
Sing into the microphone.
2.
Echo will be applied to the sound from the microphone.
To turn off the echo
Press the [ECHO] button to turn it off.
1.
48
Page 49
Singing along with the VIMA
Enjoying karaoke with a commercially available music CD
(Center Cancel)
You can eliminate sounds (such as vocals) localized at the center of a commercially
available music CD, and sing the vocal yourself. This is a convenient way to use your
favorite music CD to enjoy karaoke or for vocal practice.
Insert your CD into the CD tray, and select the song that you want to play
1.
(p. 26).
Press the [MUTE/CENTER CANCEL] button so it’s lit.
2.
The Center Cancel function is active.
fig.CentereCancel-e.eps
Press the [PLAY/STOP] button to play the song.
3.
When the song plays, sounds localized at the center (such as vocals) will be temporarily
muted.
Sing along with the song.
NOTE
For some songs, the vocal sound may not be eliminated completely.
Press the [PLAY/STOP] button to stop playback.
4.
To defeat the Center Cancel function
Press the [MUTE/CENTER CANCEL] button to turn it off.
1.
The Center Cancel function is turned off.
When you play back the song, the melody or vocal will be heard at its original volume.
The [MELODY MUTE] button won’t function if you’re playing a music CD.
49
Page 50
Connecting other equipment
Connecting audio equipment
By connecting the VIMA to your audio equipment or external
speakers, you can play the VIMA’s sounds from your stereo
system’s speakers or from other external speakers, or record
your performance on an MD recorder or other recording
device.
To make connections, use an audio cable with 1/4” phone
plugs.
Playing the VIMA through connected speakers
fig.ConnectStereoSet1-e.eps
Speakers etc.
Input L/R (Line In)
926a, 921
* When connection cables with resistors are used, the
volume level of equipment connected to the inputs may
be low. If this happens, use connection cables that do
not contain resistors.
* Before connecting the VIMA to other devices, you must
turn down the volume of all devices and turn off their
power to prevent malfunctions or speaker damage.
1.
Minimize the volume of the VIMA and of the
speakers.
2.
Switch off power to the VIMA and the
speakers.
3.
Make connections using separately available
audio cables.
Switch on the VIMA’s power.
4.
5.
Switch on power to the speakers.
6.
Adjust the volume of the VIMA and the
speakers.
When you play the VIMA’s keyboard, you’ll hear the
sound from the connected speakers.
The VIMA’s Rear Panel
Turning the power off
1.
2.
3.
Minimize the volume of the VIMA and of the
speakers.
Switch off power to the speakers.
Switch off power to the VIMA.
50
Page 51
Playing the sound of an audio device through the VIMA
fig.ConnectStereoSet2-e.eps
Portable audio player etc.
Connecting other equipment
1.
Minimize the volume of the VIMA and of the
audio device.
Switch off power to the VIMA and the audio
2.
device.
Make connections using separately available
3.
audio cables.
4.
Switch on power to the audio device.
Switch on the VIMA’s power.
5.
Adjust the volume of the VIMA and the audio
6.
device.
The sound of the connected audio device will be heard
from the VIMA.
NOTE
There will be a difference in volume depending on
the audio device that’s connected.
Turning the power off
Minimize the volume of the VIMA and of the
1.
audio device.
2.
Switch off power to the VIMA.
3.
Switch off power to the connected audio
device.
51
Page 52
Connecting other equipment
Connecting a television
You can connect a video device to the VIMA and directly output the image from that video device to a television or
other display equipped with a video connector.
fig.ConnectTV-e.eps
Portable audio player etc.
The VIMA’s
rear panel
Video cable
Switch off power to the VIMA, and the television
1.
and video device you’ll be connecting.
2.
Connect the video device to the VIMA.
Use a video cable to connect your video device to the
VIMA’s VIDEO connector.
VIDEO
connector
Video cable
Television or other display
equipped with a video connector
Turning the power off
You must observe the following order when you turn off the
power.
Switch off the power on the television.
1.
Connect the VIMA to your television.
3.
Switch on the video device’s power.
4.
Switch on power to the VIMA.
5.
6.
Switch on the television.
The image from the video input will appear on the
television.
NOTE
NOTE
The image received at the video input will be output
without change from the VIDEO connector. It will not
be shown on the VIMA’s display.
There will be a difference in volume depending on
the video device that’s connected.
52
2.
Minimize the VIMA’s volume.
3.
Switch off the VIMA’s power.
Switch off the video device’s power.
4.
Page 53
Connecting MIDI equipment
Performance data can be exchanged between the VIMA and
external MIDI equipment, allowing them to control each other.
For example, you can play one device from the keyboard of
another device, or switch sounds remotely.
What’s MIDI?
“MIDI” stands for “Musical Instrument Digital Interface.” It
is a universal standard that allows performance data to be
exchanged among electronic musical instruments and
computers.
The VIMA provides MIDI connectors so that performance
data can be transferred between it and other devices. By
using these connectors to connect other devices with the
VIMA, you can take advantage of a wide range of
possibilities.
Connecting other equipment
Playing a MIDI sound module from the
VIMA
fig.ConnectMIDI1-e.eps
MIDI Sound Module
MIDI
THRUOUT
IN
MIDI Cable
The VIMA’s
Rear Panel
Using a MIDI sequencer to play the VIMA
fig.ConnectMIDI2-e.eps
Roland MT Series
MIDI
OUT
IN
MIDI Cable
The VIMA’s
Rear Panel
NOTE
If you connect the VIMA with a MIDI sequencer, turn
off the Thru function of the connected MIDI sequencer.
Making connections
Minimize the volume of the VIMA and of the
1.
MIDI equipment.
2.
Switch off power to the VIMA and the MIDI
equipment.
3.
As shown in the illustrations, use MIDI cables
to connect the VIMA and the MIDI equipment.
Switch on power to the VIMA and the
4.
connected MIDI equipment.
5.
Adjust the volume of the VIMA and the
connected MIDI equipment.
If necessary, change the MIDI transmit
6.
channel.
For details on the MIDI transmit channel, refer to
“Changing the MIDI transmit channel (MIDI Tx
Channel)” (p. 57).
53
Page 54
Connecting other equipment
Connecting your computer
If you use a USB cable to connect the USB connector located
on the VIMA’s rear panel to the USB connector of your
computer, you’ll be able to do the following things.
• Use the VIMA to play SMF data played back by MIDIcompatible software (such as Media Player).
• By transferring MIDI data between the VIMA and your
sequencer software, you’ll be able to enjoy a wide range
of possibilities for music production and editing.
Connect the VIMA to your computer as shown below.
fig.ConnectComp-e.eps
USB Connecter
USB Cable
Computer
The VIMA’s
Rear Panel
If connection to your computer is
unsuccessful...
Normally, you don’t need to install a driver in order to connect
the VIMA to your computer. However, if some problem occurs,
or if the performance is poor, using the original driver may
solve the problem.
For details on downloading and installing the original driver,
refer to the Roland website.
Roland website: http://www.roland.com/
http://www.Roland-VIMA.com
Specify the USB driver you want to use, and then install the
driver. For details, refer to “USB driver settings (USB Driver)”
(p. 58).
* Refer to the Roland website for system requirements.
However, please be aware that the VIMA does not
support Mac OS 9.
Roland website: http://www.roland.com/
* You can’t use the MIDI connectors while using the USB
connector.
Caution
• To avoid the risk of malfunction and/or speaker
damage, always make sure to turn the volume all the
way down and turn off the power on all equipment
before you make any connections.
• Only MIDI data can be transmitted and received via
USB.
• A USB cable is not included. If you need to obtain
one, ask the dealer where you purchased the VIMA.
• Switch on power to the VIMA before you start up the
MIDI application on your computer. Don’t turn the
VIMA’s power on/off while your MIDI application is
running.
54
Page 55
Settings
group of tones
Playing the recommended
sounds (Recommended Tone)
If you’ve selected an internal song or a song from a CD-ROM
made for the VIMA (VIMA TUNES), you can conveniently
select a “recommended tone” that’s suitable for that song.
Press the [MENU] button so it’s lit.
1.
The Setup Menu screen appears.
Use the [LOCATION] buttons to select
2.
<Recommended Tone>.
3.
Turn the SONG [SELECT] knob to turn the
<Recommended Tone> setting <On>.
Playing desired sounds
(Tone List)
In addition to the seven sounds that can be selected by the
INSTRUMENT buttons, the VIMA contains the sounds of
numerous other instruments.
To select these instruments, proceed as follows.
Press the [MENU] button so it’s lit.
1.
The Setup Menu screen appears.
2.
Use the [LOCATION] buttons to select <Tone
List>.
3.
Turn the SONG [SELECT] knob to turn the
<Tone List> setting <On>.
Press the [MENU] button to complete the
4.
setting.
If you want to restore the settings to their original state,
turn the above setting <Off>.
4.
Press the [MENU] button to complete the
setting.
The Tone List screen will appear.
5.
Turn the SONG [SELECT] knob to select a tone.
You can use the [LOCATION] buttons to select the first
tone in each group of tones.
6.
Play the keyboard.
If you want to restore the settings to their original state,
turn the above setting <Off>.
55
Page 56
Settings
Playing all songs consecutively
(All Song Play)
Normally, when you select and play a song, playback will
stop when you reach the end of the selected song.
However, if you wish, you can make the VIMA play back all
the songs that are in the same location.
Press the [MENU] button so it’s lit.
1.
The Setup Menu screen appears.
2.
Use the [LOCATION] buttons to select <All
Song Play>.
3.
Turn the SONG [SELECT] knob to turn the <All
Song Play> setting <On>.
Playing the same song
repeatedly
(Song Repeat)
Normally, when you select and play a song, playback will
stop when you reach the end of the selected song. However, if
you wish, you can make the VIMA play back the same song
repeatedly.
Press the [MENU] button so it’s lit.
1.
The Setup Menu screen appears.
Use the [LOCATION] buttons to select <Song
2.
Repeat>.
3.
Turn the SONG [SELECT] knob to turn the
<Song Repeat> setting <On>.
4.
Press the [MENU] button to complete the
setting.
To return to the setting in which each song is played
individually, turn the above setting <Off>.
4.
Press the [MENU] button to complete the
setting.
To return to the original state, turn the above setting
<Off>.
56
Page 57
Settings
Changing the melody channel
(Melody Channel)
If the Melody Guide function (p. 42) fails to lower the volume of
the song’s melody, or if the Melody Mute function (p. 41) fails to
mute the melody of the song, you should try changing this setting.
Most commercially available SMF music data consists of
sixteen channels (parts).
Each channel contains a separate performance; for example,
channel 1 might contain strings and channel 2 bass, with the
drums on channel 10. The song data consists of these sixteen
channels of performances, played back simultaneously.
fig.MelodyChannel.j.eps
Channel 1
Channel 2
:
Channel 10
:
Channel 16
Normally, when you play back Roland SMF music data (p.
70), the melody is assigned to channel 4.
However, some commercially available SMF music data
assigns the melody channel to a different channel. In such
cases, you’ll need to change this setting to the channel that
is used by your music data.
Strings
Bass
:
Drums
:
Guitar
Changing the MIDI transmit
channel (MIDI Tx Channel)
This setting specifies the MIDI channel on which the VIMA will
transmit.
MIDI uses sixteen “MIDI channels,” which are numbered 1
through 16.
By connecting MIDI devices and specifying the appropriate
MIDI channel for each device, you can play or select sounds
on those devices.
The VIMA will receive all sixteen channels (1--16).
For details on connecting MIDI devices, refer to
“Connecting MIDI equipment” (p. 53).
1.
Press the [MENU] button so it’s lit.
The Setup Menu screen appears.
2.
Use the [LOCATION] buttons to select <MIDI Tx
Channel>.
3.
Turn the SONG [SELECT] knob to change the
<MIDI Tx Channel>.
Press the [MENU] button so it’s lit.
1.
The Setup Menu screen appears.
2.
Use the [LOCATION] buttons to select <Melody
Channel>.
Turn the SONG [SELECT] knob to change the
3.
<Melody Channel>.
Settings (Channel)
1--16
4.
Press the [MENU] button to complete the
setting.
Settings (Channel)
1--16
Press the [MENU] button to complete the
4.
setting.
57
Page 58
Settings
NOTE
NOTE
USB driver settings
(USB Driver)
Normally, you don’t need to install a driver in order to connect
the VIMA to your computer via the USB connector. However, if
some problem occurs, or if the performance is poor, using the
original Roland driver may solve the problem. If you do so,
make the following setting to specify the USB driver you intend
to use before you install the driver.
For details on downloading and installing the original
driver, refer to the Roland website.
Roland website: http://www.roland.com/
For details on connecting the VIMA to your computer
via its USB connector, refer to “Connecting your
computer” (p. 54).
Press the [MENU] button so it’s lit.
1.
The Setup Menu screen appears.
Use the [LOCATION] buttons to select <USB
2.
Driver>.
Restoring the factory-set
condition (Factory Reset)
You can restore the settings you’ve changed on the VIMA to
their factory-set condition. This operation is called “Factory
Reset.”
When you perform a Factory Reset, all the settings
you have stored will be erased, and the VIMA will
return to the factory-set condition.
Use this operation with caution, since it will also
erase all of the content you saved in “Favorites.”
Switch off the VIMA’s power.
1.
While holding down the [MENU] button,
2.
switch on the VIMA’s power.
Press and continue holding down the [MENU]
button until “Factory reset” appears in the
screen.
The factory reset will be executed.
3.
Turn the SONG [SELECT] knob to change the
<USB Driver>.
Setting
GenericChoose this if you want to use the
OriginalChoose this if you want to use a USB
4.
Press the [MENU] button to complete the setting.
Explanation
standard USB driver that was
included with your computer.
Normally, you should use this mode.
You do not need to install the driver.
driver downloaded from the Roland
website.
You have to install the driver yourself.
3.
When the Factory Reset has been completed,
switch off the VIMA’s power, then turn it back
on again.
Never turn off the power while the screen indicates
“Factory Reset...” Doing so will destroy the VIMA’s
internal memory, rendering it unusable.
5.
Turn the VIMA’s volume to the minimum
setting. Next, switch off the power, then turn it
on again.
58
Page 59
Troubleshooting
If you think there’s a problem, read this first.
Symptom
Power does not turn on
Nothing appears in the
screen
The screen shows vertical
lines / Color is washed-out
at the edge of the screen
Pedal does not work, or is
“stuck”
Device connected to the input
jacks has insufficient volume
No sound
No sound
Cause/ActionPage
Is the AC adaptor connected correctly?
Since the VIMA uses a liquid crystal screen, it may happen that no text or graphics
appear in the screen if the temperature is below zero degrees Celsius (32 degrees
Fahrenheit).
These are due to the nature of a liquid crystal screen, and are not malfunctions.
You can adjust the screen brightness to minimize these artifacts.
Is the pedal connected correctly?
Plug the cable firmly into the pedal connector.
Could you be using a connection cable that contains a resistor?
Use a connection cable that does not contain a resistor.
Could the VIMA’s volume or the volume of the connected equipment be turned
down?
Could headphones be connected?
Could there be a plug inserted in a headphone jack?
The speakers will not produce sound if headphones (or anything else) are
connected to the headphone jack.
p. 14
–
p. 16
p. 39
p. 40
–
p. 15
p. 16
No sound (when a MIDI device is connected)
Not all the notes you play
are sounded
Could the [BALANCE] knob be set all the way toward “KEYBOARD” or “SONG”?p. 38
Are all devices powered on?
Are the MIDI cables connected correctly?p. 53
Do the MIDI channels of the VIMA and the connected device match? p. 57
The maximum simultaneous polyphony is 64 notes. If you are playing along with
a song and making heavy use of the damper pedal, the number of notes the VIMA
is attempting to produce may exceed the maximum polyphony, meaning that
some of the notes will drop out.
p. 50
–
59
Page 60
Troubleshooting
Symptom
Notes don’t sound right
Pitch of the keyboard or
song is incorrect
Keyboard volume is too low
The wrong instrument is selected when you press the
[SCAT], [CHOIR], or [VIBRAPHONE] button
High-pitched ringing is heard
Cause/ActionPage
Could you have made Key Control settings?
Could the [BALANCE] knob be all the way toward “SONG”?
The [SCAT], [CHOIR], and [VIBRAPHONE] buttons also function as buttons that
select “Recommended tones”.
If the Setup Menu item <Recommended Tone> is “On,” instrumental sounds
appropriate for the song will automatically be assigned to these buttons, and can
be selected by pressing the corresponding button.
If you hear this in headphones:
Piano sounds that have a brilliant and crisp character contain substantial highfrequency components that may sound as though a metallic ringing has been
added. This is because the character of an actual piano is being faithfully
reproduced, and is not a malfunction.
If you don’t hear this in headphones:
It is likely that there is some other reason (such as resonances within the unit).
Please contact your dealer or a nearby Roland service center.
p. 47
p. 38
p. 35
p. 55
–
The sounds of multiple instruments are heard when
you play the keyboard
Low notes sound wrong, or
are buzzy
Could you have pressed the [DRUMS] button so the keyboard is set to play drum
sounds?
If the [DRUMS] button is lit, the white keys C2--B3 will play drum sounds. The black
keys C#2--Bb3 will play sound effects, and keys C4--C7 will play the sound they
were playing before you pressed the [DRUMS] button.
If you don’t hear this in headphones:
Performing at high volumes may cause the speakers or objects near the piano to
resonate. Fluorescent lights or glass doors may also resonate sympathetically. In
particular, this is more likely to occur for lower notes and higher volumes. You can
take the following measures to minimize resonances.
• Locate the speakers 10--15 cm away from walls or other surfaces.
• Keep the volume down.
• Move away from the objects that are resonating.
If you hear this in headphones:
It is likely that there is some other reason. Please contact your dealer or a nearby
Roland service center.
–
–
60
Page 61
Troubleshooting
Symptom
Song does not play correctly / Song won’t play
Can’t play back a song from
CD-ROM
Can’t select a song
Can’t fast-forward or rewind
by pressing the [] button or [] button
The song from CD-ROM does
not play back immediately
Cause/ActionPage
If you’re using a CD-ROM you yourself made, could you have saved the song
inside a folder?
When using your computer to save songs on a CD-ROM, don’t save the songs
inside a folder.
You can’t select a song if no songs are saved in the selected location.
For example, if no songs are saved in “FAVORITES” or if no CD-ROM is inserted,
no song list will appear even if you choose “FAVORITES” or “CD-ROM” as the
song location.
You can’t rewind or fast-forward while loading music data. Please wait.
If you play back data containing performance data that exceeds the VIMA’s
storage capacity, there may be cases in which you will be unable to perform
operations other than playback (e.g., fast-forward or rewind).
SMF music data comes in two types; Formats 0 and 1. In the case of format 1
data, it may take a certain amount of time for playback to begin.
The format type is indicated on the booklet for the music data you’re using.
–
–
–
–
–
Lyric display is wrong
Song tempo becomes unstable
The name of a CD-ROM song
is not displayed
Accompaniment or song volume is low
Can’t hear the melody of the
music data
The vocal sound of a commercially available music CD
is not eliminated when you
press the Melody [MUTE/
CENTER CANCEL] button
For some types of music data, the lyrics may sometimes be displayed incorrectly.
When playing a song, the tempo may become unstable if there is an excessive
amount of performance data.
Does the file contain song information (Sequence/Track Name Meta Event)?
The song name will not be shown if the song information in the file is empty or
consists only of spaces.
Is the filename extension “MID”?
Files with other filename extensions cannot be handled as song data.
Is the filename eight or fewer single-byte characters?
If the filename is longer than eight single-byte characters, the file cannot be
correctly handled as song data.
Could the [BALANCE] knob be set all the way toward “KEYBOARD”?
Could the [MUTE/CENTER CANCEL] button be lit?
If the [MUTE/CENTER CANCEL] button is lit, the melody of the music data will be
muted. Press the [MUTE/CENTER CANCEL] button to make the button go dark.
For some commercially available music CDs, the vocal portion cannot be
eliminated.
–
–
–
–
–
p. 38
p. 41
–
61
Page 62
Troubleshooting
Symptom
Something’s wrong with the image in the connected television or external display
The image does not appear
in the connected external
display
Thin horizontal lines flicker
in the television screen
No image is shown in the external display
Something’s wrong with the sound from the microphone
Mic volume is low or inaudible
Something’s wrong with the
sound from the microphone
Cause/ActionPage
Is the external display or television correctly connected?
Is the external display powered up?p. 52
In some cases you may notice thin horizontal lines flickering in the television
screen, but this is due to the nature of television and is not a malfunction of the
VIMA.
Is your video source device correctly connected to the VIMA?
Is the mic connected correctly?
Could the VOCAL [LEVEL] knob be set to the minimum position?
The mic volume is adjusted with the VOCAL [LEVEL] knob, not the [VOLUME]
knob.
Could the [ECHO] button be lit?
If the [ECHO] button is lit, echo (reverberation) is applied to the sound from the
microphone.
p. 52
–
–
–
p. 46
p. 48
62
Page 63
If one of these messages appears
Indication
File Not Found
Cannot Read
Illegal File
Memory Full
Favorite Full
File Too Big
Too Many Tracks
Too Many Lyrics
MIDI Buffer Full
Meaning
CD-ROM is not inserted.
Insert a CD-ROM, and try the operation again.
An error occurred while reading. It is possible that the CD-ROM is damaged.
Insert other CD-ROM and try the operation again.
The file cannot be read. The data format is not compatible with the VIMA.
The VIMA does not have enough storage capacity.
The number of Favorites has reached the limit.
Delete one of the items saved in Favorites, and try the operation again.
The file size exceeds the maximum permissible size. The VIMA cannot handle this file.
The number of song tracks exceeds the limit. The VIMA cannot play back this song correctly.
The amount of lyric data in the song exceeds the limit. The VIMA cannot play back this song
correctly.
A large amount of MIDI data was received from an external MIDI device faster than the VIMA
was able to process it.
Reduce the amount of data being sent by the external MIDI device.
MIDI Off Line
MIDI Error
Failed
A MIDI cable has been disconnected, or a similar problem has occurred. Connect the MIDI
cable correctly.
A MIDI communication error has occurred. Check the MIDI cable connection and the MIDI
device that is connected.
It is possible that there is a problem with the system. Try the operation once again.
If this indication appears even after you’ve tried the operation several times, please contact
a Roland service center.
63
Page 64
Tone List
Piano
NaturalGrand
Piano 1
Piano 1w
Piano 1d
Piano 2
Piano 2w
Piano 3
Piano 3w
Honky-tonk
Honky-tonk w
E.Piano 1
E.Piano 2
Detuned EP 1
Detuned EP 2
'60s E.Piano
EP Legend
EP Phase
FM+SA EP
St.FM EP
Harpsichord
Coupled Hps.
Harpsi.w
Harpsi.o
Clav.
Pulse Clav.
Organ
Perc.Organ 1
Perc.Organ 2
Organ 1
Organ 2
TremoloOrgan
Chorus Organ
Rock Organ
'60s Organ
Church Org.1
Church Org.2
Church Org.3
Reed Organ
Puff Organ
Accordion 1
Accordion 2
Harmonica
Bandoneon
Flute
Piccolo
Recorder
Pan Flute
Oboe
Clarinet
English Horn
Bassoon
Bottle Blow
Shakuhachi
Whistle
Ocarina
Bagpipe
Shanai
64
Page 65
Tone List
Percussion
Celesta
Glockenspiel
Music Box
Vibraphone
Vibraphone w
Marimba
Marimba w
Xylophone
TubularBells
Church Bell
Carillon
Santur
Yang Qin
Timpani
Kalimba
Tinkle Bell
Agogo
Steel Drums
Woodblock
Castanets
Taiko
Concert BD
Melodic Tom1
Melodic Tom2
Synth Drum
TR-808 Tom
Elec Perc.
Reverse Cym.
(Rhythm Set)
STANDARD Set
ROOM Set
POWER Set
ELEC.Set
ANALOG Set
JAZZ Set
BRUSH Set
ORCH.Set
SFX Set
Others
Choir 1
Choir 2
Voice
Humming
Jazz Scat
Synth Voice
Analog Voice
Synth Bass 1
Synth Bass 2
Synth Bass 3
Synth Bass 4
WarmSyn.Bass
Clav.Bass
Hammer
RubberSyn.Bs
Attack Pulse
OrchestraHit
Bass Hit
6th Hit
Euro Hit
Square Lead1
Square Lead2
Sine Lead
Saw Lead 1
Saw Lead 2
Doctor Solo
Natural Lead
SequencedSaw
Syn.Calliope
Chiffer Lead
Charang
Wire Lead
Solo Vox
5th Saw Lead
Bass + Lead
Delayed Lead
Fantasia
Warm Pad
Sine Pad
Polysynth
Space Voice
Itopia
Bowed Glass
Metallic Pad
Halo Pad
Sweep Pad
Ice Rain
Soundtrack
Crystal
Synth Mallet
Atmosphere
Brightness
Goblins
Echo Drops
Echo Bell
Echo Pan
Star Theme
Gt FretNoise
Gt Cut Noise
BsStringSlap
Breath Noise
Fl.Key Click
Seashore
Rain
Thunder
Wind
Stream
Bubble
Bird 1
Bird 2
Dog
Horse Gallop
Telephone 1
Telephone 2
DoorCreaking
Door
Scratch
Wind Chimes
Helicopter
Car Engine
Car Stop
Car Pass
Car Crash
Siren
Train
Jet Plane
Starship
Burst Noise
Applause
Laughing
Screaming
Punch
Heart Beat
Footsteps
Gun Shot
Machine Gun
Laser Gun
Explosion
65
Page 66
Tone List
27
28
29
30
31
32
33
34
35
36
C2
37
38
39
40
41
42
43
44
45
46
47
48
C3
49
50
51
52
53
54
55
56
57
58
59
60
C4
61
62
63
64
65
66
67
68
69
70
71
72
C5
73
74
75
76
77
78
79
80
81
82
83
84
C6
85
86
87
88
STANDARD SetROOM SetELEC.SetPOWER Set
High Q
Slap
Scratch Push[EXC7]
Scratch Pull[EXC7]
Sticks
Square Click
Metronome Click
Metronome Bell
Kick Drum 2
Kick Drum 1
Side Stick
Snare Drum
TR-909 Clap
Electric Snare 3
Low Tom 2
Closed Hi-Hat[EXC1]
Low Tom 1
Pedal Hi-Hat [EXC1]
Mid Tom 2
Open Hi-Hat[EXC1]
Mid Tom 1
High Tom 2
Crash Cymbal 1
High Tom 1
Ride Cymbal
Chinese Cymbal
Ride Bell
Tambourine
Splash Cymbal
Cowbell
Crash Cymbal 2
Vibra-slap
Ride Cymbal
High Bongo
Low Bongo
Mute High Conga
Open High Conga
Low Conga
High Timbale
Low Timbale
High Agogo
Low Agogo
Cabasa
Maracas
Short High Whistle [EXC2]
Long Low Whistle [EXC2]
Short Guiro[EXC3]
Long Guiro[EXC3]
Claves
High Woodblock
Low Woodblock
Mute Cuica[EXC4]
Open Cuica[EXC4]
Mute Triangle[EXC5]
Open Triangle[EXC5]
Shaker
Jingle Bell
Bell Tree
Castanets
Mute Surdo[EXC6]
Open Surdo[EXC6]
-----
High Q
Slap
Scratch Push[EXC7]
Scratch Pull[EXC7]
Sticks
Square Click
Metronome Click
Metronome Bell
Room Kick 2
Room Kick 1
Side Stick
Room Snare
TR-909 Clap
Electric Snare 3
Room Low Tom 2
Closed Hi-Hat[EXC1]
Room Low Tom 1
Pedal Hi-Hat [EXC1]
Room Mid Tom 2
Open Hi-Hat [EXC1]
Room Mid Tom 1
Room High Tom 2
Crash Cymbal 1
Room High Tom 1
Ride Cymbal
Chinese Cymbal
Ride Bell
Tambourine
Splash Cymbal
Cowbell
Crash Cymbal 2
Vibra-slap
Ride Cymbal
High Bongo
Low Bongo
Mute High Conga
Open High Conga
Low Conga
High Timbale
Low Timbale
High Agogo
Low Agogo
Cabasa
Maracas
Short High Whistle [EXC2]
Long Low Whistle [EXC2]
Short Guiro [EXC3]
Long Guiro [EXC3]
Claves
High Woodblock
Low Woodblock
Mute Cuica [EXC4]
Open Cuica [EXC4]
Mute Triangle [EXC5]
Open Triangle[EXC5]
Shaker
Jingle Bell
Bell Tree
Castanets
Mute Surdo[EXC6]
Open Surdo [EXC6]
-----
High Q
Slap
Scratch Push [EXC7]
Scratch Pull [EXC7]
Sticks
Square Click
Metronome Click
Metronome Bell
Power Kick 2
Power Kick 1
Side Stick
Dance Snare
TR-909 Clap
Electric Snare 3
Power Low Tom 2
Closed Hi-Hat [EXC1]
Power Low Tom 1
Pedal Hi-Hat [EXC1]
Power Mid Tom 2
Open Hi-Hat [EXC1]
Power Mid Tom 1
Power High Tom 2
Crash Cymbal 1
Power High Tom 1
Ride Cymbal
Chinese Cymbal
Ride Bell
Tambourine
Splash Cymbal
Cowbell
Crash Cymbal 2
Vibra-slap
Ride Cymbal
High Bongo
Low Bongo
Mute High Conga
Open High Conga
Low Conga
High Timbale
Low Timbale
High Agogo
Low Agogo
Cabasa
Maracas
Short High Whistle [EXC2]
Long Low Whistle [EXC2]
Short Guiro [EXC3]
Long Guiro [EXC3]
Claves
High Woodblock
Low Woodblock
Mute Cuica [EXC4]
Open Cuica [EXC4]
Mute Triangle [EXC5]
Open Triangle [EXC5]
Shaker
Jingle Bell
Bell Tree
Castanets
Mute Surdo [EXC6]
Open Surdo [EXC6]
-----
High Q
Slap
Scratch Push [EXC7]
Scratch Pull [EXC7]
Sticks
Square Click
Metronome Click
Metronome Bell
Electric Kick 2
Electric Kick 1
Side Stick
Electric Snare 1
TR-909 Clap
Electric Snare 2
Electric Low Tom 2
Closed Hi-Hat [EXC1]
Electric Low Tom 1
Pedal Hi-Hat [EXC1]
Electric Mid Tom 2
Open Hi-Hat [EXC1]
Electric Mid Tom 1
Electric High Tom 2
Crash Cymbal 1
Electric High Tom 1
Ride Cymbal
Reverse Cymbal
Ride Bell
Tambourine
Splash Cymbal
Cowbell
Crash Cymbal 2
Vibra-slap
Ride Cymbal
High Bongo
Low Bongo
Mute High Conga
Open High Conga
Low Conga
High Timbale
Low Timbale
High Agogo
Low Agogo
Cabasa
Maracas
Short High Whistle [EXC2]
Long Low Whistle [EXC2]
Short Guiro [EXC3]
Long Guiro [EXC3]
Claves
High Woodblock
Low Woodblock
Mute Cuica [EXC4]
Open Cuica [EXC4]
Mute Triangle [EXC5]
Open Triangle [EXC5]
Shaker
Jingle Bell
Bell Tree
Castanets
Mute Surdo [EXC6]
Open Surdo [EXC6]
-----
*
-----
: No sound.
* [EXC]: will not sound simultaneously with other percussion instruments of the same number.
66
Page 67
C2
C3
C4
C5
C6
28
29
31
33
35
36
38
40
41
43
45
47
48
50
52
53
55
57
59
60
62
64
65
67
69
71
72
74
76
77
79
81
83
84
86
88
ANALOG SetJAZZ SetORCH.SetBRUSH Set
High Q
27
Slap
Scratch Push [EXC7]
Scratch Pull [EXC7]
30
Sticks
32
Square Click
Metronome Click
34
Metronome Bell
TR-909 Kick
TR-808 Kick
TR-808 Rim Shot
37
TR-808 Snare
TR-808 Clap
39
Electric Snare 3
TR-808 Low Tom 2
TR-808 Closed Hi-Hat [EXC1]
42
TR-808 Low Tom 1
44
TR-808 Closed Hi-Hat [EXC1]
TR-808 Mid Tom 2
46
TR-808 Open Hi-Hat [EXC1]
TR-808 Mid Tom 1
TR-808 High Tom 2
TR-808 Crash Cymbal
49
TR-808 High Tom 1
Ride Cymbal
51
Chinese Cymbal
Ride Bell
Tambourine
54
Splash Cymbal
56
TR-808 Cowbell
Crash Cymbal 2
58
Vibra-slap
Ride Cymbal
High Bongo
Low Bongo
61
TR-808 High Conga
TR-808 Mid Conga
63
TR-808 Low Conga
High Timbale
Low Timbale
66
High Agogo
68
Low Agogo
Cabasa
70
TR-808 Maracas
Short High Whistle [EXC2]
Long Low Whistle [EXC2]
Short Guiro [EXC3]
73
Long Guiro [EXC3]
TR-808 Claves
75
High Woodblock
Low Woodblock
Mute Cuica [EXC4]
78
Open Cuica [EXC4]
80
Mute Triangle [EXC5]
Open Triangle [EXC5]
82
Shaker
Jingle Bell
Bell Tree
Castanets
85
Mute Surdo [EXC6]
Open Surdo [EXC6]
87
-----
High Q
Slap
Scratch Push [EXC7]
Scratch Pull [EXC7]
Sticks
Square Click
Metronome Click
Metronome Bell
Jazz Kick 2
Jazz Kick 1
Side Stick
Jazz Snare
TR-909 Clap
Electric Snare 3
Low Tom 2
Jazz Closed Hi-Hat [EXC1]
Low Tom 1
Jazz Pedal Hi-Hat [EXC1]
Mid Tom 2
Jazz Open Hi-Hat [EXC1]
Mid Tom 1
High Tom 2
Crash Cymbal 1
High Tom 1
Ride Cymbal
Chinese Cymbal
Ride Bell
Tambourine
Splash Cymbal
Cowbell
Crash Cymbal 2
Vibra-slap
Ride Cymbal
High Bongo
Low Bongo
Mute High Conga
Open High Conga
Low Conga
High Timbale
Low Timbale
High Agogo
Low Agogo
Cabasa
Maracas
Short High Whistle [EXC2]
Long Low Whistle [EXC2]
Short Guiro [EXC3]
Long Guiro [EXC3]
Claves
High Woodblock
Low Woodblock
Mute Cuica [EXC4]
Open Cuica [EXC4]
Mute Triangle [EXC5]
Open Triangle [EXC5]
Shaker
Jingle Bell
Bell Tree
Castanets
Mute Surdo [EXC6]
Open Surdo [EXC6]
-----
High Q
Slap
Scratch Push [EXC7]
Scratch Pull [EXC7]
Sticks
Square Click
Metronome Click
Metronome Bell
Jazz Kick 2
Jazz Kick 1
Side Stick
Brush Tap
Brush Slap
Brush Swirl
Brush Low Tom 2
Brush Closed Hi-Hat [EXC1]
Brush Low Tom 1
Jazz Pedal Hi-Hat [EXC1]
Brush Mid Tom 2
Brush Open Hi-Hat [EXC1]
Brush Mid Tom 1
Brush High Tom 2
Brush Crash Cymbal
Brush High Tom 1
Brush Ride Cymbal
Chinese Cymbal
Brush Ride Bell
Tambourine
Splash Cymbal
Cowbell
Crash Cymbal 2
Vibra-slap
Ride Cymbal
High Bongo
Low Bongo
Mute High Conga
Open High Conga
Low Conga
High Timbale
Low Timbale
High Agogo
Low Agogo
Cabasa
Maracas
Short High Whistle [EXC2]
Long Low Whistle [EXC2]
Short Guiro [EXC3]
Long Guiro [EXC3]
Claves
High Woodblock
Low Woodblock
Mute Cuica [EXC4]
Open Cuica [EXC4]
Mute Triangle [EXC5]
Open Triangle [EXC5]
Shaker
Jingle Bell
Bell Tree
Castanets
Mute Surdo [EXC6]
Open Surdo [EXC6]
-----
Tone List
Jazz Closed Hi-Hat [EXC1]
Jazz Pedal Hi-Hat [EXC1]
Jazz Open Hi-Hat [EXC1]
Ride Cymbal
Sticks
Square Click
Metronome Click
Metronome Bell
Concert Bass Drum 2
Concert Bass Drum 1
Side Stick
Concert Snare Drum
Castanets
Concert Snare Drum
Timpani F
Timpani F#
Timpani G
Timpani G#
Timpani A
Timpani A#
Timpani B
Timpani c
Timpani c#
Timpani d
Timpani d#
Timpani e
Timpani f
Tambourine
Splash Cymbal
Cowbell
Concert Cymbal 2
Vibra-slap
Concert Cymbal 1
High Bongo
Low Bongo
Mute High Conga
Open High Conga
Low Conga
High Timbale
Low Timbale
High Agogo
Low Agogo
Cabasa
Maracas
Short High Whistle [EXC2]
Long Low Whistle [EXC2]
Short Guiro [EXC3]
Long Guiro [EXC3]
Claves
High Woodblock
Low Woodblock
Mute Cuica [EXC4]
Open Cuica [EXC4]
Mute Triangle [EXC5]
Open Triangle [EXC5]
Shaker
Jingle Bell
Bell Tree
Castanets
Mute Surdo [EXC6]
Open Surdo [EXC6]
Applause
*
-----
: No sound.
* [EXC]: will not sound simultaneously with other percussion instruments of the same number.
67
Page 68
Tone List
27
28
29
30
31
32
33
34
35
36
C2
37
38
39
40
41
42
43
44
45
46
47
48
C3
49
50
51
52
53
54
55
56
57
58
59
60
C4
61
62
63
64
65
66
67
68
69
70
71
72
C5
73
74
75
76
77
78
79
80
81
82
83
84
C6
85
86
87
88
SFX Set
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
----High Q
Slap
Scratch Push [EXC7]
Scratch Pull [EXC7]
Sticks
Square Click
Metronome Click
Metronome Bell
Guitar Fret Noise
Guitar Cutting Noise Up
Guitar Cutting Noise Down
String Slap of Double Bass
Fl.Key Click
Laughing
Screaming
Punch
Heart Beat
Footsteps 1
Footsteps 2
Applause
Door Creaking
Door
Scratch
Wind Chimes
Car Engine
Car Stop
Car Pass
Car Crash
Siren
Train
Jet Plane
Helicopter
Starship
Gun Shot
Machine Gun
Laser Gun
Explosion
Dog
Horse Gallop
Birds
Rain
Thunder
Wind
Seashore
Stream
Bubble
-----
-----
-----
-----
*
-----
: No sound.
* [EXC]: will not sound simultaneously with other percussion instruments of the same number.
68
Page 69
Internal Song List
* All rights reserved. Unauthorized use of this material for purposes other than private, personal enjoyment is a violation of
applicable laws.
1
American Patrol
2
Bill Bailey, Won’t You Please Come Home?
3
Can Can
4
Turkey in the Straw
5
Yankee Doodle Boy
6
Yellow Rose of Texas
7
Abide with Me
8
Amazing Grace
9
When The Saints Go Marchin’ In
10
Away In A Manger
11
Deck The Halls
21
Let Me Call You Sweetheart
22
Star Spangled Banner
23
Entertainer
24
Stagecoach
25
Little Brown Jug
26
Old MacDonald Had A Farm
27
Twinkle Twinkle, Little Star
28
Mary Had A Little Lamb
29
London Bridge
30
Liebestraume 3
31
Fantaisie-Impromptu
12
O Little Town of Bethlehem
13
We Wish You A Merry Christmas
14
Jingle Bells
15
Silent Night, Holy Night
16
Joy To The World
17
Aloha Oe
18
America
19
America The Beautiful
20
For He’s A Jolly Good Fellow
32
Arabesque 1
33
An der schonen, blauen Donau
34
Clair de Lune
69
Page 70
Music Files That the VIMA Can Use
What Are Music Files?
Music files contains musical information such as how long the
key for a corresponding pitch is played, the force applied to
the key played, and other such information. Performance data
is transmitted to the VIMA from music files saved in a CD-ROM
and played back without change as songs. This is different
than an audio CD, since the music file does not contain a
recording of the sound itself. This makes it possible to change
tempos and keys freely, allowing you to use it in many
different ways.
Regarding Copyright
Use of the song data supplied with the Data Disk attached to
this product for any purpose other than private, personal
enjoyment without the permission of the copyright holder is
prohibited by law. Additionally, this data must not be copied,
nor used in a secondary copyrighted work without the
permission of the copyright holder.
The VIMA Allows You To Use the
Following Music Files
General MIDI
The General MIDI is a set of recommendations which seeks to
provide a way to go beyond the limitations of proprietary
designs, and standardize the MIDI capabilities of sound
generating devices. Sound generating devices and music files
that meets the General MIDI standard bears the General MIDI
logo. Music files bearing the General MIDI logo can be
played back using any General MIDI sound generating unit to
produce essentially the same musical performance.
General MIDI 2
The upwardly compatible General MIDI 2 recommendations pick
up where the original General MIDI left off, offering enhanced
expressive capabilities, and even greater compatibility. Issues that
were not covered by the original General MIDI recommendations,
such as how sounds are to be edited, and how effects should be
handled, have now been precisely defined. Moreover, the
available sounds have been expanded. General MIDI 2 compliant
sound generators are capable of reliably playing back music files
that carry either the General MIDI or General MIDI 2 logo.
In some cases, the conventional form of General MIDI, which does
not include the new enhancements, is referred to as “General
MIDI 1” as a way of distinguishing it from General MIDI 2.
VIMA TUNES
VIMA TUNES is a Roland specification for music data that
contains image and lyric data, allowing you to enjoy songs with
lyrics and images simultaneously. When data bearing the
“VIMA TUNES” logo is played back on a device that bears the
same logo, lyrics can be shown on the screen of a connected
external display or television, letting you enjoy karaoke or watch
a slide show.
* This instrument (RK-100) is not able to play back VIMA
TUNES images.
SMF Music Files
SMFs (Standard MIDI Files) use a standard format for music file
that was formulated so that files containing music file could be
widely compatible, regardless of the manufacturer of the
listening device. An enormous variety of music is available,
whether it be for listening, for practicing musical instruments, for
Karaoke, etc.
SMF with Lyrics
“SMF with Lyrics” refers to SMF (Standard MIDI File) that
contains the lyrics. When Music Files carrying the “SMF with
Lyrics” logo are played back on the VIMA, the lyrics will
appear in its display.
GS Format
The GS Format is Roland’s set of specifications for standardizing
the performance of sound generating devices. In addition to
including support for everything defined by the General MIDI,
the highly compatible GS Format additionally offers an
expanded number of sounds, provides for the editing of sounds,
and spells out many details for a wide range of extra features,
including effects such as reverb and chorus. Designed with the
future in mind, the GS Format can readily include new sounds
and support new hardware features when they arrive. Since it is
upwardly compatible with the General MIDI, Roland’s GS
Format is capable of reliably playing back GM Scores equally
as well as it performs GS music files (music files that have been
created with the GS Format in mind).
XG lite
XG is a tone generator format of YAMAHA Corporation, that
defines the ways in which voices are expanded or edited and
the structure and type of effects, in addition to the General
MIDI 1 specification. XGlite is a simplified version of XG tone
generation format. You can play back any XG music files using
an XGlite tone generator. However, keep in mind that some
music files may play back differently compared to the original
files, due to the reduced set of control parameters and effects.
70
Page 71
MIDI Implementation Chart
Digital Keyboard
Model RK-100
Basic
Channel
Mode
Note
Number :
Velocity
After
Touch
Pitch Bend
Control
Change
Function...
Default
Changed
Default
Messages
Altered
True Voice
Note ON
Note OFF
Key’s
Ch’s
98, 99
100, 101
0, 32
6, 38
10
11
64
65
66
67
84
91
93
MIDI Implementation Chart
TransmittedRecognizedRemarks
4
1
Mode 3
x
**************
30–101
**************
O
x
x
x
O
O
O
1
x
5
x
O
7
x
O
O
x
O
O
x
O
x
x
x
–16
1–16
1–16
Mode 3
Mode 3, 4(M=1)
0–127
0–127
O
x
O
O
O*1
O
O
O
O
O
O
O
O
O
O
O
O
O (Reverb)
O (Chorus)
O
O
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
Date : June 1, 2006
Version : 1.00
* 2
Bank select
Modulation
Portamento time
Data entry
Volume
Panpot
Expression
Hold 1
Portamento
Sostenuto
Soft
Portamento control
Effect1 depth
Effect3 depth
NRPN LSB, MSB
RPN LSB, MSB
Prog
Change
: True #
System Exclusive
System
Common
System
Real Time
Aux
Message
: Song Pos
: Song Sel
: Tune
: Clock
: Commands
: All sound off
Reset all controllers
:
: Local Control
: All Notes OFF
: Active Sense
: Reset
Notes
Mode 1 : OMNI ON, POLY
Mode 3 : OMNI OFF, POLY
0–127
**************
O
x
x
x
O
x
x
x
x
x
O
x
O
0–127
O
x
x
x
x
x
O (120, 126, 127)
O
O
O (123–125)
O
x
* 1 O x is selectable by Sys Ex.
* 2 Recognized as M=1 even if M=1.
Mode 2 : OMNI ON, MONO
Mode 4 : OMNI OFF, MONO
*1
Program number 1–128
O : Yes
X : No
71
Page 72
Main Specifications
[Keyboard]
Keyboard
[Sound Generator]
Maximum
Polyphony
Parts16 parts + Keyboard part
Wave Memory32 M bytes (16-bit linear equivalent)
Tones
[Song Controls]
Tempo
Key Control-6 to +5 (in semitones)
61 keys (with velocity)
64 voices
Tones: 264
Drum Sets: 8 Drum sets + Sound Effects,
Manual Drums
GM2/GM/GS/XG lite Format
50--200%
[Others]
CD Drive
USB (MIDI)
Rated Power
Output
Speakers10 cm x 2
Display240 x 92 dots (backlit graphic LCD)
Connectors
Media: CD-ROM, Music CD
Operating System
Windows XP Home Edition SP2 or later/
XP Professional Edition SP2 or later
Mac OS X v10.2 or later
14.8 W + 14.8 W
Audio Output Jacks (L/MONO, R)
Video Output Jack
Phones Jacks 1/2
Vocal Jacks 1/2
MIDI Connectors (IN, OUT)
Expression Pedal Jack
Damper Pedal Jack
USB Connector
EXT IN (VIDEO, L/R) Jacks
Power SupplyDC 12 V (AC Adaptor)
Current Draw4000 mA
1119 (W) x 378 (D) x 144 (H) mm
Dimensions
Weight
Accessories
Options
962a
* In the interest of product improvement, the specifications
and/or appearance of this unit are subject to change
without prior notice.
44-1/16 (W) x 14-15/16 (D) x 5-11/16
(H) inches
9.2 kg / 20 lbs 5 oz
(excluding AC adaptor)
Music Rest
Owner’s Manual
“Roland Photo & Music - Sample Disc”
VIMA TUNES CD-ROM
Note ID Label (two types)
Drum Key-Map Label
AC Adaptor (PSB-7U)
Keyboard Stand: KS-RK100
Pedal Switch: DP Series
Expression Pedal: EV-5
USB connector ............................................................ 12
USB driver ................................................................. 58
74
Page 75
For EU Countries
This product complies with the requirements of European Directive 89/336/EEC.
For the USA
FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Unauthorized changes or modification to this system can void the users authority to operate this equipment.
This equipment requires shielded interface cables in order to meet FCC class B Limit.
For Canada
NOTICE
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
AVIS
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
For the U.K.
IMPORTANT: THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE.
BLUE:
BROWN:
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.
Under no circumstances must either of the above wires be connected to the earth terminal of a three pin plug.
NEUTRAL
LIVE
For the USA
DECLARATION OF CONFORMITY
Compliance Information Statement
Model Name :
Type of Equipment :
Responsible Party :
Address :
Telephone :
RK-100
Digital Keyboard
Roland Corporation U.S.
5100 S. Eastern Avenue, Los Angeles, CA 90040-2938
(323) 890-3700
Page 76
InformationWhen you need repair service, call your nearest Roland Service Center or authorized Roland