Roland DP90S User Manual
About the Wireless LAN Function
Check the version
The wireless LAN function was added in DP90S/DP90
version 2.00. If the version is earlier than 2.00, download the
update from the support page (http://www.roland.com/
support/) g Downloads g product name (DP90S/DP90)
g DP90S/DP90 System Program Version 2.00, and update
your DP90S/DP90.
* If this supplementary manual was included with a new
DP90S/DP90 you purchased, your instrument has already
been updated to version 2.00 or later; you do not need to
update.
How to check the version
Hold down the [–] and [+] button and turn ON the
DP90S/DP90.
What is Wireless LAN Function?
By inserting the wireless USB Adapter (WNA1100-RL; sold separately)
into the DP90S/DP90’s USB MEMORY port, you’ll be able to use
wireless-compatible applications (such as the “Piano Partner” iPad
app).
iPad etc.
Wireless LAN access point
(e.g., wireless LAN router)
DP90S/DP90
Basic Connection Method (Connect by
WPS)
The rst time you connect the DP90S/DP90 to a wireless network,
you’ll need to perform the following procedure (WPS) to join the
wireless network.
This procedure is required only the rst time. (Once you’ve joined the
network, this procedure will no longer be necessary.)
What is WPS?
This is a standard that makes it easy to make security settings
when connecting to a wireless LAN access point. We recommend
that you use WPS when connecting to a wireless LAN access point.
1. Insert the wireless USB Adapter (WNA1100-RL; sold
separately) into the DP90S/DP90’s USB MEMORY port.
2. While holding down the [Key Touch] button, press the
[Transpose] button.
3. Press the [ ] [ ] (Slow/Fast) buttons to select the
“Wireless,” then press the [Song] button.
4. Press the [ ] [ ] (Slow/Fast) buttons to select the
“Connect,” then press the [Song] button.
Wireless USB Adapter (sold
separately: WNA1100-RL)
Wireless LAN Wireless LAN
Items required to use the wireless LAN function
Wireless USB Adapter (sold separately: WNA1100-RL)
Wireless LAN access point (e.g., wireless LAN router) *1 *2 *3
iPad etc.
*1 The wireless LAN access point you use must support WPS. If your
wireless LAN access point does not support WPS, you can connect
using the procedure described in “Connecting to a Wireless LAN
Access Point That You Select (Select AP)” (p. 2).
*2 The ability to connect with all kinds of wireless LAN access points
is not guaranteed.
*3 If you’re unable to connect to the wireless LAN access point, try
connecting using Ad-Hoc mode (p. 3).
5. Press the [ ] [ ] (Slow/Fast) buttons to select the “WPS,”
then press the [Song] button.
“Proceed?” will appear.
6. Perform the WPS operation on your wireless LAN access
point (e.g., press the WPS button on your wireless LAN
access point).
For details on WPS operation of your wireless LAN access point, refer
to the documentation for your wireless LAN access point.
7. Press the [ ] (Fast) button of the DP90S/DP90.
Once successfully connected, “Success” will appear.
* If you fail to connect, refer to “Troubleshooting” (p. 4).
8. Press the [Key Touch] or [Transpose] button to exit
Function mode.
NOTE
* The device (e.g., iPad) running the app must be connected to the
same network.
MEMO
• The connection data is stored in memory when you perform
the WPS procedure; the device will automatically connect to the
wireless network the next time.
• All connection data will be erased if you perform a factory reset.
DP90S/DP90
This completes the procedure necessary for joining
the wireless network. You can use the wireless
connection from an iPad app such as Piano Partner.
1
About the Wireless LAN Function
Wireless LAN Function Settings
You can view or edit the wireless settings.
Basic Operation
1. While holding down the [Key Touch] button, press the
[Transpose] button.
2. Press the [ ] [ ] (Slow/Fast) buttons to select the
“Wireless,” then press the [Song] button.
3. Press the [ ] [ ] (Slow/Fast) buttons to select menu,
then press the [Song] button.
Menu Explanation
Status This shows the wireless LAN status.
Connect Connect to a wireless LAN access point.
Option Make settings for Wireless ID or Ad-Hoc mode (p. 3).
In the explanations that follow, procedures will be indicated
using arrows, like this: “Wireless” g “Status.”
Status Indication
This shows the wireless LAN status.
Connecting to a Wireless LAN Access Point
That You Select (Select AP)
This method lets you connect by choosing a wireless LAN access
point from the list that is displayed.
* Wireless standards 802.11g/n (2.4 GHz) and authentication
methods WPA/WPA2 are supported.
1. Select “Wireless” g”Connect” g “Select AP,” then press the
[Song] button.
The Select Access Point screen will appear.
• An “*” symbol is shown for the currently-connected wireless LAN
access point.
2. Press the [–] [+] button to choose the wireless LAN access
point to which you want to connect, and press the [Song]
button.
• You will be connected to the selected wireless LAN access point.
• If you’re using this wireless LAN access point for the rst time,
you’ll proceed to the authorization (PASS) screen.
• If this is a wireless LAN access point to which you have connected
in the past, just press the [Song] button and you’ll be connected.
Once successfully connected, “Success” will appear.
1. Select “Wireless” g “Status.”
The status screen will appear.
Display Explanation
Signal level:
Strong
Signal level:
Middle
Signal level:
Weak
Not Con
NotAvail The wireless USB adapter is not inserted.
DP90S/90
SSID
Currently connected to the wireless LAN access point.
Three bars are used to indicate the signal level (the
strength of the connected wireless LAN access point’s
radio signal).
The identier (name) of the connected wireless LAN
access point is shown.
The wireless USB adapter is inserted, but not
connected to a wireless LAN access point.
Ad-Hoc mode (p. 3).
The Ad-Hoc SSID is shown. Press the [
to display the Ad-Hoc key.
For details, refer to “Connecting in Ad-Hoc mode” (p. 3).
] (Fast) button
2. Press the [ ] (Fast) button to display the IP address.
Authorization screen (PASS)
3. Enter the security code (passphrase) of your wireless LAN
access point, and press the [Song] button.
How to enter characters
Use the [
which you want to specify a character. Use the [–] [+] buttons to
change the character.
* You cannot enter a space at the end of the passphrase.
Once successfully connected, “Success” will appear.
* If you fail to connect, refer to “Troubleshooting” (p. 4).
4. Press the [Key Touch] or [Transpose] button to exit
Function mode.
] [ ] (Slow/Fast) buttons to select the position at
2
Loading...