Page 1
Spectrum Analyzer
3 GHz
Page 2
2 HAMEG INSTRUMENTS
| HMS-X
1 Basic Unit + 3 Options
Amplitude measurement range
-114 dBm to +20 dBm
-104 dBm to +20 dBm
Video bandwidth
Detectors: auto-, min-/max.-peak, sample, RMS, average, quasi-peak*
Tracking generator*
Frequency range: 5 MHz to 1.6 GHz/3 GHz*
Output level: -20 dBm to 0 dBm
with HMS-3G (HV212) option
with HMS-EMC (HV213) option
with HMS-TG (HV211) option
Key facts
HMS-X
Model overview: HMS-X with EMC option HMS-X basic unit
HMS-TGHMS-3GHMS-EMC
Page 3
Your HMS-X Spectrum Analyzer
You can create your HMS spectrum analyzer by combining a basic unit with any
confi gured, combined and upgraded for your applications.
The preamplifi er function is an integral part of the HMS-EMC option
This option activates the tracking generator
The frequency range is increased from
This option activates all the functions that are
The preamplifi er option has been integrated into the
| www.hameg.com
3 GHz
HMS-3G
HMS previous models HMS-X
HMS-TGHMS-EMC
Page 4
| HMS-X
Upgrade at any time
available only with purchase of HMS-X basic unit
activate HMS-X options at any time after purchase of HMS-X basic unit
You can easily upgrade all three available options at any later point in time with
The voucher number and the serial number of your HMS-X instrument enable
http://voucher.hameg.com
HV213
HV211
Activates EMC option
HMS-X options Option code
HV212
HV211
Upgrade to 3 GHz
HMS-X
*1
HMS-X
HV211
HV211
Unlocks TG
Voucher code
*2
Page 5
EMC Precompliance
| www.hameg.com
EMC precompliance sets
1 GHz EMC-SET1
HMS-X
3 GHz EMC-SET2
HMS-X
HMS-EMC
HMS-EMC
HMS-3G
Spectrum analyzer HMS-X
Line impedance stabilization network
for line conducted measurements
LISN HM6050-2
1 GHz probe set
HZ530
HMExplorer software for EMC
precompliance measurements
3 GHz probe set
HZ540 (fi g. similar)
Page 6
| HMS-X
Accessories
Recommended Accessories
This unit is used to measure the voltage standing wave ratio (VSWR) and
Typical test devices include attenuators, terminations, frequency switches,
3 GHz VSWR bridge HZ547
3 GHz VSWR bridge for HMS-X, option HMS-TG required, option HMS-3G recommended
HZ46
HZ99
HO730
Near-field probe set 3 GHz HZ540 | HZ550
Alternative version
HZ540L | HZ550L
HO740
HZ530
Page 7
| www.hameg.com
Technical Data
Spectrum analyzer HMS-X
Temperature stability:
Aging:
Accuracy
Tolerance
Video bandwidths:
Amplitude
Average noise level displayed up to +20 dBm
Amplitude measurement
Typ. -104 to +20 dBm
Typ. -114 to +20 dBm
TOI products, 2 x -20 dBm
to 1.6 GHz/3 GHz
typ. -124 dBm
f >30 MHz, RBW ≤100 kHz)
Trace mathematics:
A-B (curve-stored curve), B-A
Auto-, Min-, Max-Peak, Sample, RMS, Average
VSWR
Trigger input:
Trigger voltage
Audio output (Phone):
AM and FM (internal speaker)
Trigger
Video Trigger
with activated HMS-3G option
with activated HMS-EMC option
with activated HMS-TG option
Accessories included:
Firmware: ≥ 2.022
Page 8
Trade names are trademarks of the owners
Loading...