R&S®HA-Z5M
LO/IF Line Extender
Manual
(=ÀÛ82)
1350770802
Version 01
About the R&S®HA-Z5M LO/IF line extenderR&S®HA-Z5M
1
About the R&S
®
HA-Z5M LO/IF line
extender
The R&S®HA-Z5M LO/IF Line Extender is especially designed for Rohde & Schwarz
external mixers and signal and spectrum analyzers.
This manual applies to the following devices:
Product name Order number
R&S HA-Z5M 1350.6660.02
Key features
●
LO/IF Line Extender with integrated LO amplifier
●
Measurements with external harmonic mixers at high frequencies with low insertion
loss
●
5m connection cables for increased flexibility in the test setup
2 Preparing for use
The R&S®HA-Z5M is designated for use in industrial, administrative, and laboratory
environments. Use the R&S®HA-Z5M only for its designated purpose. Observe the
usage instructions documented in this manual, as well as operating conditions and performance limits stated in the data sheet. The product documentation helps you use the
R&S®HA-Z5M safely and efficiently. Keep the product documentation in a safe place
and pass it on to subsequent users.
●
Before use, inspect the connectors of the R&S®HA-Z5M for damage. If there is any
damage, contact Rohde & Schwarz for repair.
●
Before use, inspect the connecting cables and their connectors for damage. If
there is any damage, contact Rohde & Schwarz for repair.
●
Always use an appropriate torque wrench when connecting the R&S®HA-Z5M
cables to an instrument to avoid excessive force.
3 Measurement setup
Connect the R&S®HA-Z5M to the R&S spectrum analyzer and the R&S FS-Zxx external mixer as shown below. Use an appropriate torque wrench when connecting the
cables.
2Manual 1350.7708.02 ─ 01
Loading...