Rode Microphones WIRELESS GO User Guide

USER GUIDE

OVERVIEW

The Wireless Go is a compact wireless microphone
system that operates in the 2.4GHz spectrum. The
kit includes a transmitter with an internal microphone
and a reciever with 3.5mm TRS output.

SET UP

Press and hold the power button for 3
seconds to turn on the the RX (receiver).

Press and hold the power button for 3
seconds to turn on the TX (transmitter).

The units will already be paired and start
transmitting audio, the transmitter will
be using the internal microphone.

Clip on the supplied windshield if required
If desired, plug in a compatible external microphone

and the TX will automatically switch the audio input.
Connect the 3.5mm TRS output of the RX to a

camera’s microphone input or similar audio device.

Wireless Go User Guide V01 RØDE MICROPHONES – MAY 2019