NTG-3
Instruction Manual
www.rodemic.com
(EMC, LVD)
Introduction
Thank you for your purchase of the NTG-3 precision broadcast-grade shotgun microphone.
The NTG-3 is one of ’s most exciting microphones. It is the result of years of development by engineers, providing the professional broadcast and film industries with an affordable yet uncompromising microphone.
One of the key features of the NTG-3 is its ability to withstand adverse conditions. Using a technology known as RF bias the NTG-3 is almost completely resistant to moisture, making it the only option when recording in any demanding environments where condensation is an issue.
In addition to its very low weight and anti-glare finish, the NTG-3 also features incredibly low self-noise. I’m confident that you won’t find a similar microphone that is this quiet.
When not in use you’ll be able to store the NTG-3 in the weather resistant aluminium anti-roll storage cylinder (standard with purchase), providing additional protection when traveling and storing the NTG-3.
Please take the time to visit www.rodemic.com and register your microphone for a full ten year warranty.
While there you can view studio/field tips and techniques, as well as browse the comprehensive range of accessories for the NTG-3 and other microphones.
Peter Freedman
Microphones
Sydney, Australia
- 2 -
|
Specifications |
Acoustic |
Line Gradient |
Principle: |
|
Directional |
Super-Cardioid |
Pattern: |
|
Frequency |
40Hz - 20kHz |
Range: |
|
Output |
25Ω |
Impedence: |
|
Sensitivity: |
-30dB ± 2dB |
|
(31.6mV/Pa) |
Equivalent Noise: |
13 dBA |
Maximum |
8.2dBu |
Output: |
|
Dynamic Range: |
117dB SPL |
Maximum SPL: |
130dB @ 1kHz |
Signal/Noise: |
81 dB |
Power |
P48 phantom |
Requirement: |
(44-52V min 5mA) |
Output |
3-pin XLR |
Connection: |
|
Net Weight: |
163g |
Dimensions: |
19mm x 255mm |
- 3 -