RODE Microphones HS1 User Manual
INSTRUCTION MANUAL
www.rodemic.com
INTRODUCTION
Thank you for investing in the RØDE HS1 Headset microphone.
Whether you’re presenting for television or live on-stage, in a 20,000
seat auditorium or in a house of worship, RØDE has your needs
covered with the reliable and intuitive HS1.
Featuring the pure, clear audio and low handling noise that RØDE is
celebrated for, the HS1 Headset is built to deliver and to last.
Subtle, ergonomic design including three axes of mechanical
adjustment, malleable tube arm and ultra lightweight headband
ensure the perfect fi t for each individual.
Knowing that versatility is paramount in any product, we at RØDE
have developed the MiCon™ connector system which provides
seamless integration between the HS1 Headset and a wide range
of wireless systems.
Please take the time to visit www.rodemic.com and register your
microphone for warranty.
Peter Freedman
RØDE Microphones
Sydney, Australia
- 3 -
- 3 -
FEATURES
ERGONOMIC DESIGN
• Ultra discreet appearance
• Three axes of mechanical adjustment for perfect fi t
• Malleable tube arm and headband for fi ne adjustment
• Ultra lightweight construction for complete comfort
• Right or left side confi guration
• Incorporated cable management system
HIGH QUALITY PERFORMANCE
• Ø3.4 mm (Ø0.144”) miniature microphone
• Corrosion resistant stainless steel tube arm
• Incorporated moisture control belt to minimise sweat
contacting the capsule
• Low handling noise
UNIVERSAL COMPATIBILITY
• RØDE MiCon™ connector system provides seamless
integration with a wide range of wireless systems while
maintaining discreet and unobtrusive appearance
• Gold plated connections
- 4 -
HS1 & ACCESSORIES
1. RØDE HS1 Headset
2. Anti-trauma water resistant storage case
3. Water resistant pop fi lter
4. Mini-furry for high wind protection
5. Shielded, detachable Kevlar® reinforced cable
6. Lapel-style cable management clip
7. Adjustment tools
8. Sanitary cleansing wipes
Compact, interchangeable MiCon™ adaptors available to suit
industry standard wireless systems*
2.
4.
3.
1.
*MiCon™ adaptors sold separately - see rodemic.com/hs1 for a full list of compatibility
- 5 -
- 5 -
5.
6.
8.
7.
SPECIFICATIONS
Acoustic Principle: Permanently polarised condenser
Directional Pattern: Omni-directional (see graph)
Frequency Range: 60 Hz ~ 18 KHz
(see graph)
Output Impedence: 3k Ω Ty pical
Signal To Noise Ratio: 58 dBA
Equivalent Noise: 36 dBA SPL
(per IEC651)
Clipping SPL: 122 dB
Maximum Output: 189 mV**
Sensitivity: -47.2 dB re 1 V/Pa
(21mV @ 94 dB SPL)
± 3 dB @ 1 kHz
Dynamic Range: 86 dB Typical**
Power Requirements: Min 2V ~ Max 5V through RØDE wireless
adaptors
P48 through RØDE XLR adaptor
Output Connection: RØDE MiCon™ connector
- 6 -
FREQUENCY RANGE
20
10
0
-10
dB re 1 V/Pa
-20
-30
20Hz 100 1000 10 000 20 000
POLAR RESPONSE
+5.0
0.0
-2.0
-4.0
-6.0
-8.0
-10.0
-12.0
-14.0
-16.0
-18.0
-20.0
-22.0
-24.0
-25.0
dB rel. 1V/Pa
SPECIFICATIONS
-2.0
-10.0
-20.0
Frequency:
500 Hz:
1000 Hz:
4000 Hz:
** Calculated from maximum SPL peak before clipping.
All measurements are calculated when powered at 5V or P48 (RØDE XLR adaptor)
- 7 -
- 7 -
HS1 STRUCTURE
CABLE
CONTROL TAB
MiCon™
CONNECTION
HEADBAND
RETAINER
MOISTURE
CONTROL BELT
EAR HOOK
MICROPHONE
WITH POP FILTER
RETAINER
CAP
- 8 -
HEADBAND SIZE
ADJUSTMENT TAB
Loading...