RODE STEREO VIDEOMIC X svmx_datasheet.pdf

Stereo VideoMic X
Professional grade Stereo on-camera microphone
Features
Acoustically matched true condenser capsules
Rycote® Lyre onboard shock mounting
Balanced professional XLR output
Heavy-duty, lightweight aluminium construction
High Pass Filter
9V or Phantom Power (P48 - via miniXLR)
Level adjustment
High Frequency Boost
Included pop shield and wind shield (not shown)
10 Year Warranty*
Specifications
Acoustic Principle Pressure Gradient
Polar Pattern Cardioid
Frequency Rate 40Hz ~ 20kHz
Frequency Range (High Pass Filter)
Variable Level -10, 0, +20dB
Output Impedence 200Ω
Signal to Noise Ratio 82 dBA SPL (as per IEC651)
Equivalent Noise 12 dBA SPL (as per IEC651)
Maximum SPL 143dB SPL
Sensitivity
Dynamic Range 131 dB SPL
Power Requirements
Output Connection (Unbalanced)
4.0 in (102mm)4.6 in (118mm)
Output Connection (Balanced)
Battery Life 30 hours
Weight (No Battery) 300g
AUSTRALIA
107 Carnarvon st, Silverwater NSW 2128 Australia Ph: +61 2 9648 5855 Fx: +61 2 9648 2455
USA
PO Box 91028, Long Beach CA 90809-1028 Ph: +1 562 364 7400 Fax: +1 888 412 4664
0, 75, 150Hz
-32 dB re 1V/Pa (25mV @ 94dB SPL) ± 2dB @ 1kHz
9V alkaline batter y or P48 (via miniXLR)
3.5 Stereo mini jack plug (dual mono), Tip – left channel, Ring – right channel
Mini XLR (TA3F style connector) Pin 1 (Ground), Pin 2 (+), Pin 3 (-).
-2.0
-10.0
90˚ 270˚
: : :
-20.0
180˚
Frequency responsePolar pattern Notes
75Hz HPF
150Hz HPF
High Boost
* Online registration is required for 10 year warranty
Cable not included
Loading...