Rode smartLav+ Specification Sheet

smartLav+

Professional Lapel Microphone

AUSTRALIA

107 Carnarvon st, Silverwater NSW 2128 Australia
Ph: [phone] Fx: [phone]

USA

PO Box 91028, Long Beach CA 90809-1028
Ph: [phone] Fax: [phone]

Features

• Professional Lavalier Mic with TRRS Jack

• Compatible with iOS devices and select Android
devices*

• Operates in conjunction with RØDE Rec app

• Discrete 4.5mm miniature microphone

• Omni-directional condenser capsule

• Removable water resistant pop lter

• Including Lavalier mounting Clip and Pouch

• Designed in Australia

• Kevlar® reinforced cable

Specifications

Acoustic Principle

Permanently Polarised

Condenser

Active Electronics JFET

Polar Pattern Omni-directional

Frequency Range

Output Impedance

Signal To Noise

60 Hz ~ 18 KHz

3k Ω Typical

67 dB

Ratio

Equivalent Noise

27 dB Typical

Clipping SPL 110 dB

Maximum Output 189 mV

Sensitivity -35dB (17.8mV @94dB SPL)

Dynamic Range 83 dB Ty pic a l

Power Requirements

Powered from iPhone TRRS
socket (2.7V)

Output Connection Gold-plated TRRS plug

+5.0

0.0

-2.0

-4.0

-6.0

-8.0

-10.0

-12.0

-14.0

-16.0

-18.0

-20.0

-22.0

-24.0

dB rel. 1V/Pa

Frequency:

500 Hz:
1000 Hz:
4000 Hz:
8000 Hz:

14000 Hz:

Frequency ResponsePolar Pattern

-2.0

-10.0

-25.0

-20.0

Notes

* visit smartlav.com for full
device compatibility list”