Rode NT1 Kit Specifications

NT1

0˚

M3

Multi Powered 3/4” Condenser Microphone

Incredibly Quiet 1” Cardioid Condenser Microphone

Features

• Large capsule (1”) with gold-plated membrane

• Cardioid polar pattern

• Internal Rycote® Lyre® based capsule shock mounting system

• Ultra-low noise transformerless circuitry

• State-of-the-art surface mount electronics

• Heavy-duty matte black finish

• Gold plated output connectors

• Designed & manufactured in Australia

• Available with RM2 mount (NT1-SINGLE) or with SMR shock mount (NT1-KIT)

• Free 10 year extended warranty*

Specifications

Acoustic Principle Pressure Gradient

Active Electronics JFET impedance converter with

bipolar output buffer

Directional Pattern Cardioid

Frequency Range 20Hz ~ 20kHz

Output Impedence 100Ω

Equivalent Noise 4.5 dBA SPL (as per IEC651)

Maximum Output +8 dBu (1kHz, 1% THD into 1K Ω load)

Sensitivity -29 dB re 1V/Pa

(35mV @ 94dB SPL)
± 2dB @ 1kHz

Dynamic Range 128 dB SPL

Maximum SPL 132 dB SPL

Signal / Noise 90 dBA SPL (as per IEC651)

Power Requirements 24V phantom power

48V phantom power

Output Connection 3 Pin XLR

Balanced output between pin 2 (+),
pin 3 (-) and pin 1 (ground)

Net Weight 395g

-25.0

*After online registration

-2.0

-10.0

90˚ 270˚

:
:
:
:
:

-20.0

180˚

Frequency ResponsePolar Pattern

Australia
107 Carnarvon st, Silverwater NSW 2128 Australia
Ph: [phone] Fx: [phone]

www.rodemic.com

USA
PO Box 91028, Long Beach CA 90809-1028
Ph: [phone] Fax: [phone]