Rockwell Automation MPM User Manual

Installation Instructions

IMPORTANT

SpeedTec-ready DIN Motor/Actuator Connectors

Do not install the O-ring on the SpeedTec-ready DIN motor/actuator connector when you are using the SpeedTec DIN (M7) cable plugs.

SpeedTec DIN (M7) Cable Plug

Threaded DIN (M4) Cable Plug

• 2090-CFBM7Dx-xxAxxx standard and continuous-flex feedback cables.

• 2090-CPxM7DF-xxAxxx standard and continuous-flex power/brake cables.

• 2090-XXNxMF-Sxx standard feedback and power cables.

• 2090-CxxM4DF-xxAFxx continuous-flex feedback, power, and power/brake cables.

Install the O-ring on the SpeedTec-ready DIN motor/actuator connector when you are using the threaded DIN (M4) cable plugs.

SpeedTec-ready DIN Motor/Actuator Connectors

When to Install the O-ring on the SpeedTec-ready DIN Motor/Actuator Connector

If you are using a SpeedTec-ready DIN motor/actuator connector with a threaded DIN (M4) cable plug, install the O-ring on the motor/actuator connector before connecting the M4 cable plug.

See Kinetix® Motion Accessories Specifications Technical Data, publication GMC-TD004, for a circular DIN-connector compatibility overview.

Allen-Bradley, Rockwell Automation, and Kinetix are trademarks of Rockwell Automation, Inc.

Trademarks not belonging to Rockwell Automation are property of their respective companies.

Rockwell Otomasyon Ticaret A.Ş., Kar Plaza İş Merkezi E Blok Kat:6 34752 İçerenköy, İstanbul, Tel: +90 (216) 5698400

Publication 2090-IN047A-EN-P - September 2013 PN-186170