Rockwell Automation 1492-CM1771-LD008F User Manual
Digital I/O Conversion Module
(Cat 1492-CM1771-LD008F)
I. Description
This Digital I/O Conversion system provides for the conversion of (1) 1771, 16 point I/O modules to be converted
to (2) 1756, 8 point I/O module and consists of the following:
(1) 1771 Modules (16pt) to (2) 1756 Module (8pt)
(1) Conversion Modules: 1492-CM1771-LD008F
(1) Cable: 1492-CONCAB005S1 (Table 2)
(1) Conversion Mounting Assembly: 1492-MUA… (Table 1)
This conversion is accomplished without the removal of any field wires from the existing 1771 Swing Arm. The
existing 1771 Swing Arm fits directly onto the edge connector of the 1492 Conversion Module. On one end of the
1492 Cable is (1) connector for the Conversion Module. On the other end are (2) Removable Terminal Blocks
(RTBs) for the (2) 1756 I/O modules, as shown in the photo below. The I/O signals are routed through the 1492
Conversion Module and the 1492 Cable to the appropriate terminals on the (2) 1756 I/O modules per the Wiring
Diagrams in Section VI. As standard, both portions of the 1492 Cables are 0.5M long, but we also offer a 1.0M
cable length. Refer to the footnotes in Table 2, Section III for further details.
WARNING
Cable
1492-CONCAB005
S1
Conversion Compatibility
and Product I.D. Label
37-Pin Connector for cable
1492-CONCAB005
S1
1492-CM1771-LD008F Conversion Module
De-energize and lockout any and all power to all I/O field devices connected to the A-B 1771 I/O
chassis, and the power to the 1771 I/O chassis itself. Ensure all power is de-energized and locked out
to any device in the control cabinet where the conversion is to be performed. Ensure work is
performed by qualified personnel.
PN-114280
DIR 10000060091 (Version 01)
Publication 1492-IN038B-EN-E
Printed in U.S.A.
II. Installation
:
The 1492 Conversion Modules must be installed in a 1492 Conversion Mounting Assembly (see Table 1 below). A
complete System Installation Manual ships with the 1492 Conversion Mounting Assembly.
1) Determine the quantity of each type of 1771 I/O modules used in the 1771 I/O Chassis to be converted.
2) Select the applicable 1492 Conversion Modules from Table 2, Section III.
3) Review the Max Slots for I/O and Chassis Width data from the Table 1 below.
4) Select a 1756 I/O Chassis which has enough I/O Slots.
NOTE: (2) I/O slots are required in the 1756 Chassis for conversions where (1) 1771 I/O module converts to (2) 1756 I/O
modules.
5) Select the 1492 Conversion Mounting Assembly which has enough Conversion Module slots.
NOTE: (2) Conversion Module slots are required in the 1492 Conversion Mounting Assembly for conversions where (2)
1771 I/O module convert to (1) 1756 I/O modules.
NOTE: The 1492 Conversion Mounting Assembly has the same Height & Width foot-print as the 1771 Chassis and is
designed to use the same mounting hardware. The combined Depth of the 1492 Conversion Mounting Assembly with the
1756 Chassis mounted on top is 10.25 inches (Controller w/key) or 10.0 inches (Controller w/o key). Dimension drawings
are included in the System Installation Manual that ships with the 1492 Conversion Mounting Assembly.
Table 1: Bulletin 1771 to 1756 Chassis Conversion
1771 Chassis 1756 Chassis Conversion Mounting Assembly
Max
Cat. No.
1771-A1B 4 9.01 12.61
1771-A2B 8 14.01 17.61
1771-A3B1
1771-A4B 16 24.01
Slots
for
I/O
12 19.01
Chassis Width
without
Power
Supply
with
Power
Supply
Cat. No.
1756-A4
1756-A7
1756-A7
1756-A10
1756-A10
1756-A13
1756-A13
1756-A17
Max
Slots
Chassis
for
I/O
12 23.15
12 23.15
16 29.06
Width
3 10.35
6 14.49
6 14.49
9 19.02
9 19.02
Max Slots
Cat. No.
1492-MUA1B-A4-A7 4 9.01
1492-MUA2B-A7-A10 8 14.01
1492-MUA3-A10-A13 12 19.01
1492-MUA4-A13-A17 16 24.01
for
Conversion
Modules
Chassis
Width
oot Notes
1771-A3B is not listed as it is used for 19 inch wide instrumentation panels.
Notice that the 1756 Chassis Width sometimes exceeds the 1771 Chassis Width, with or without the Power Supply. The
Cover-Plate of the 1492 Conversion Mounting Assembly allows the 1756 Chassis to be Left justified, Right justified or
Centered. A complete System Installation Manual ships with the 1492 Conversion Mounting Assembly.
PN-114280
DIR 10000060091 (Version 01)
Publication 1492-IN038B-EN-E
(2)
Loading...