Terminal Cover
Couvercle de la borna
Klemmenabdeckung
(Cat 1492-ASPTC1)
WARNING
AVERTISSEMENT
WARNUNG
AVVERTENZA
ADVERTENCIA
To prevent electrical shock, disconnect from power source before installing or servicing.
Avant le montage et la mise en service, couper l'alimentation secteur pour éviter toutes
décharges.
Vor Installations- oder Servicearbeiten Stromversorgung unterbrechen, um Elektroschocks
zu vermeiden.
Per prevenire infortuni, togliere tensione prima dell'installazione o manutenzione.
Desconéctese de la corriente eléctrica, antes de la instalación o del servicio, a fin de
impedir sacudidas eléctricas.
为防止触电,请在电源完全断开后才进行安装或维修
1492-RCD
Copriterminale
Tampa do terminal
Cubierta para terminales
Removal
See note 3
Important Instructions
1. The 1492-ASPTC1 is meant to be inserted ONLY into the
1492-RCD or 1492-SP product families.
2. Align the ears of the Terminal Cover with the terminal screw hole
and push down until the Terminal Cover snaps into place.
3. The 1492-ASPTC1 is not to be removed by hand. Use a flathead
screwdriver to lift up the side of the Terminal Cover until it pops
out of the terminal screw hole.
Insertion
DIR: 10000342159 (Version 00)
Printed in U.S.A.