Rockwell Automation 1414-CHDxxxxx User Manual

Installation Instructions

Space Humidity Transmitter

Catalog Number(s) 1414-CHD30PKDAA,
1414-CHZ30PKRAA, 1414-IHD20GKRAA,
1414-IHZ20GKRAA

About the Space Humidity Transmitter

The Relative Humidity transmitter uses a capacitive type humidity sensor for
reliable, accurate readings.

IMPORTANT

The humidity sensor used in this device is static sensitive.
Anti-static precautions should be followed to prevent damage to
the sensor.

Publication 1414-IN016A-EN-P - October 2005

2 Space Humidity Transmitter

Important User Information

Solid state equipment has operational characteristics differing from those of electromechanical equipment.
Safety Guidelines for the Application, Installation and Maintenance of Solid State Controls (Publication
SGI-1.1 available from your local Rockwell Automation sales office or online at
http://www.literature.rockwellautomation.com) describes some important differences between solid state
equipment and hard-wired electromechanical devices. Because of this difference, and also because of the
wide variety of uses for solid state equipment, all persons responsible for applying this equipment must
satisfy themselves that each intended application of this equipment is acceptable.

In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages
resulting from the use or application of this equipment.

The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many
variables and requirements associated with any particular installation, Rockwell Automation, Inc. cannot
assume responsibility or liability for actual use based on the examples and diagrams.

No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits,
equipment, or software described in this manual.

Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell
Automation, Inc., is prohibited.

Throughout this manual, when necessary, we use notes to make you aware of safety considerations.

WARNING

IMPORTANT

ATTENTION

SHOCK HAZARD

BURN HAZARD

Identifies information about practices or circumstances that can cause an explosion in
a hazardous environment, which may lead to personal injury or death, property
damage, or economic loss.

Identifies information that is critical for successful application and understanding of
the product.

Identifies information about practices or circumstances that can lead to personal injury
or death, property damage, or economic loss. Attentions help you identify a hazard,
avoid a hazard and recognize the consequences.

Labels may be located on or inside the equipment (e.g., drive or motor) to alert people
that dangerous voltage may be present.

Labels may be located on or inside the equipment (e.g., drive or motor) to alert people
that surfaces may be dangerous temperatures.

Publication 1414-IN016A-EN-P - October 2005