Rockford Fosgate AudioPhile LP-1, AudioPhile LP-2, AudioPhile 2X-4 Owner's Manual





AUDIO

phile

LP-1 & LP-2 Low Pass Crossovers

2x-4 2-Way Crossover

Owner's Manual

Dear Customer,
Congratulations on your purchase of America’s finest

brand of Crossovers. At Rockford Fosgate we are commit­ted to musical reproduction at its best, and we are pleased
you chose our product. Through years of engineering
expertise, hand craftsmanship and critical testing proce­dures we have created a wide range of products that
reproduce music with all the clarity and richness you
deserve.

For maximum performance we recommend you have
your new Rockford Fosgate product installed by an Au­thorized Rockford Fosgate Dealer, as we provide special­ized training through Rockford Technical Training Insti­tute (RTTI). Please read your warranty and retain your
receipt and original carton for possible future use.

PRACTICE SAFE SOUND™

CONTINUOUS EXPOSURE TO SOUND PRESSURE LEVELS
OVER 100dB MAY CAUSE PERMANENT HEARING LOSS.
HIGH POWERED AUTO SOUND SYSTEMS MAY PRODUCE
SOUND PRESSURE LEVELS WELL OVER 130dB. USE COM-

MON SENSE AND PRACTICE SAFE SOUND.

The serial number can be found on the outside of the box. Please
be sure to record it in the space provided below as your perma­nent record. This will become useful in recovering your product
if ever stolen and serve as verification of your factory warranty.

Serial Number: _________________________________________

Model Number:___________________________________

Introduction

This manual provides information on the features, installa­tion and operation of the Punch AUDIOphile Low Pass
Crossovers (LP-1 and LP-2), and 2-way Crossover (2x-4). We
suggest you save this manual for future reference.

We strongly recommend you have your Authorized Rock­ford Fosgate Dealer install the Crossovers. If you do choose
to install the crossover yourself, please be sure to read the
entire manual before beginning.

– 1 –

Design & Features
Punch Audiophile LP1 and LP2

The Punch AUDIOphile LP-1 and LP-2 passive, two channel,
low pass crossovers are designed to conform to the perfor­mance and standards of the new Punch AUDIOphile woofers,
but will work with all Rockford Fosgate woofers. These low
pass filters are designed to meet the following criteria:

• First order network(s), 6dB / octave at 100Hz for 2Ω / 4Ω loads

• Compact design with screw terminals for input and output

• 200 watt power handling

• Low DC resistance to minimize losses

• Two channel or single channel operation

– 2 –

Punch AUDIOphile 2x-4

The 2x-4 Crossover is designed to be the "link" between
tweeters, and mid-bass and mid-range speakers. This com­pact 2-way crossover is designed to conform to the following
criteria:

• 2-Way Crossover network centered at 4kHz

• Uses Linkwitz-Riley 2nd order transfer function (12dB/
octave)

• Additional tweeter filtering uses a series notch filter cen­tered at 1500Hz to minimize the tweeter's resonant peak

• Also included is an impedance compensation network
(Zobel) that flattens out the gradual impedance rise above
10kHz

• Tweeter protection provided through a special compres­sion circuit

– 3 –

The compression circuit in the crossover consists of an
array of two lamps wired in parallel, whose function is to
monitor the input power to the tweeter. When it sees a
threatening increase in input voltage, it will increase its
resistance. This technique is fast, and virtually undetect­able to the listener. Other manufacturers' tweeter protec­tion is done via circuit breakers, which drastically reduce
tweeter output – very noticeable and distracting for the
listener.

• Small size, accomplished by inductors wound on specially
designed ferrite bobbins

Note: With the second order Linkwitz-Riley network of the
2x-4, an out-of-phase condition can exist in the pass band.
The best performance is usually achieved by placing the
tweeter out-of-polarity with the midrange/woofer. We rec­ommend you start with it wired in this manner, listen,

– 4 –

– 5 –

reverse the polarity, and then listen again. Select the one
which offers the smoothest sounding frequency response.
See the wiring diagrams on pages 12 and 13 for more
information.

Mounting the Crossovers

The LP-1, LP-2, and 2x-4 are secured to relatively flat surfaces
with sheetmetal screws inserted into the mounting holes on
either side of the enclosure.

Input & Output Connectors

The LP-1, LP-2, and 2x-4 feature silver-plated “screw-lok”
terminals which are used to secure both the input and output
speaker wires. The LP-1 and LP-2 accept wire sizes up to 12

gauge.

Wiring the Crossovers

The LP-1 and LP-2 are designed to be wired in series with the
subwoofers being used. Both positive (+) and negative (-)
thruput connectors are provided. For more information, refer
to the diagrams beginning on page 8.
Working with 2Ω and 4Ω woofer loads and crossover fre­quencies of 100Hz will set the inductor values for the LP-1
and LP-2 at 3.5 mH and 6.6 mH respectively.

To place the crossover in “mono mode,”

1. Place a jumper between the left to right positive outputs.

2. Place another jumper between the left to right negative

outputs.

– 6 –

Once the jumpers are in place, mono filter input and output
then become either the left positive (+) and negative (-), or
right positive (+) and negative (-) inputs.

The table below lists the various crossover options available
with the LP-1 and LP-2 filters. The frequencies indicated here
reflect real measurements and not calculations based on
inductor values.

Model Number 2

Ω

Load 4Ω Load 8Ω Load

LP-1 Stereo Mode 100 Hz 200 Hz 400 Hz
LP-1 Mono Mode 50 Hz 100 Hz 200 Hz
LP-2 Stereo Mode 50 Hz 100 Hz 200 Hz
LP-2 Mono Mode 25 Hz 50 Hz 100 Hz

– 7 –

Sample Wiring Diagrams

– 8 –

LP-1 Stereo Mode (2 x 3.5 mH coils)

+

–

–

+

+

–

–

+

L

R

Input

Input

from
amp

Output

To

Woofers

LP-1

– 9 –

+

–

–

+

+

–

–

+

L

R

Input

Jumpers

Output

To

Woofers

Input from

Amp

LP-1

LP-1 Mono Mode

– 10 –

LP-2 Stereo Mode (2 x 6.6 mH coils)

+

–

–

+

+

–

–

+

L

R

Input

Input

from
amp

Output

To

Woofers

LP-2

– 11 –

+

–

–

+

+

–

–

+

L

R

Input

Jumpers

Output

To

Woofers

Input from

Amp

LP-2 Mono Mode

LP-2

– 12 –

2x-4 Crossover Wiring Diagram

+ –

+ –+ –

>

>

>

>

>

>

+ –

+ –

2x-4

Tweeter
Output

Woofer
Output

Input

Input

from

Amplifier

RFA 44/54/64

ND-4

Bandpassing the woofer on a 2x-4

– 13 –

+ –

>

>

+ –

2x-4

Woofer
Output

RFA 44/54/64

>

>

Input
from
Amplifier

400µf

capacitor

Input

Tweeter

Output

ND-4

+ –

+ –

+ –

Warranty Information

Rockford Fosgate warrants all loudspeakers to the original pur­chaser for a period of two (2) years parts and labor, providing the
product was purchased from an Authorized Rockford Fosgate
Dealer. Speakers found to be defective during the warranty
period will be repaired or replaced (with a product deemed to be
equivalent) at Rockford Fosgate’s discretion. Repaired or re­placed speakers will cover the balance of the original warranty
period only. Warranty does not cover abuse or installation error.
If a determination is made that the product has been abused or
is out of the warranty period, it will be repaired, exchanged, and
billed. Parts not covered under warranty will be repaired or
replaced and billed. For speaker boxes, please return the speaker
only. Speakers must be returned prepaid to Grand Rapids, MI.

GENERAL

Electronics and speaker warranties do not cover any appearance
item, any cost or expense related to the removal or reinstallation
of the product, any accessory used in conjunction with the
product, damage to the product resulting from alteration, acci­dent, misuse or abuse, or improper installation. This warranty

does not apply if the parts or labor, which would otherwise be
provided without charge under this warranty, are obtained from
any source other than Rockford Fosgate or an Authorized Rock­ford Fosgate Service Center.

The warranty is the only express warranty and does not create
any implied warranties. Rockford Fosgate limits its obligations
under any implied warranties under state laws to a period not to
exceed the written warranty period. Some states do not allow
limitation on how long an implied warranty lasts, so the above
limitation may not apply. This warranty applies only to products
sold in the United States of America or its possessions. For
warranty outside the U.S.A., please contact the nearest Autho­rized Rockford Fosgate Dealer. This warranty gives the consumer
specific legal rights, and the consumer may have other rights
which vary from state to state.

A defective product must be shipped prepaid to the Authorized
Rockford Fosgate Dealer from which the consumer purchased
the product or to one the addresses below, in the original factory
carton or equivalent. Any shipping loss or damage will be borne
by the consumer or the consumer’s shipper. A consumer return-

ing a product to the factory should call [phone] for a
Return Authorization Number. All shipments shall be clearly
marked with the Return Authorization Number on the outside of
the shipping carton.

Prices are subject to change without notice.

1-800-669-9899.

Rockford Fosgate:
609 Myrtle N.W.

Grand Rapids, MI 49504 (Receiving-speakers)

Rockford Fosgate

A Division of Rockford Corporation

546 South Rockford Drive

Tempe, Arizona 85281 U.S.A.

In U.S.A., [phone]

In Canada, call Korbon [phone]

In Europe, Fax [phone]

MAN-0475
CP-8668 (4/93)