Rockford FNP1414, FNP1514, FNP1614F, FNP1614 Owner's Manual

® ®

car audio

component systems

for

fanatics

operation &operation &

operation &

operation &operation &
installationinstallation

installation

installationinstallation

Dear Customer,
Congratulations on your purchase of the world's finest brand of car audio speakers. At

Rockford Fosgate we are fanatics about musical reproduction at its best, and we are
pleased you chose our product. Through years of engineering expertise, hand craftsman­ship and critical testing procedures, we have created a wide range of products that
reproduce music with all the clarity and richness you deserve.

For maximum performance we recommend you have your new Rockford Fosgate
product installed by an Authorized Rockford Fosgate Dealer, as we provide specialized
training through Rockford Technical Training Institute (RTTI). Please read your
warranty and retain your receipt and original carton for possible future use.

Great product and competent installations are only a piece of the puzzle when it comes
to your system. Make sure that your installer is using 100% authentic installation
accessories from Connecting Punch in your installation. Connecting Punch has
everything from RCA cables and speaker wire to Power line and battery connectors.
Insist on it! After all, your new system deserves nothing but the best.

To add the finishing touch to your new Rockford Fosgate image order your Rockford
wearables, which include everything from T-shirts and jackets to hats and sunglasses.

To get a free brochure on Rockford Fosgate products and Rockford accessories, in the
U.S. call 602-967-3565 or FAX [phone]. For all other countries, call +001-602­967-3565 or FAX [phone].

PRACTICE SAFE SOUND™

CONTINUOUS EXPOSURE TO SOUND PRESSURE LEVELS OVER 100dB

CAUSE PERMANENT HEARING LOSS. HIGH POWERED AUTOSOUND

MAY
SYSTEMS

MAY PRODUCE SOUND PRESSURE LEVELS WELL OVER

130dB. USE COMMON SENSE AND PRACTICE SAFE SOUND.

If, after reading your manual, you still have questions regarding this product,
we recommend that you see your Rockford Fosgate dealer. If you need further
assistance, you can call us direct at 1-800-669-9899. Be sure to have your serial
number, model number and date of purchase available when you call.

The serial number can be found on the outside of the box. Please record it in
the space provided below as your permanent record. This will serve as
verification of your factory warranty and may become useful in recovering your
product if it is ever stolen.

Serial Number: ________________________________
Model Number:________________________________

T

ABLE OF

C

ONTENTS

Introduction................................................................................................1

Package Contents ....................................................................................... 1

Design Features .......................................................................................... 2

Installation Considerations ........................................................................... 4

Mounting Location ...................................................................................... 5

Installation ................................................................................................. 6

Troubleshooting.......................................................................................... 9

Specifications ........................................................................................... 10

Warranty Information ................................................................................ 11

International Information............................................................................ 12

G

ETTING STARTED

Welcome to Rockford Fosgate! This manual is designed to provide information
for the owner, salesperson and installer. For those of you who want quick
information on how to install this product, please turn to the

Section

of this manual or refer to the icons listed below. Other information can

Installation

be located by using the Table of Contents. We, at Rockford Fosgate, have
worked very hard to make sure all the information in this manual is current. But,
as we are constantly finding new ways to improve our product, this information
is subject to change without notice.

I

® ®

N
S
T
A
L
L
A
T

I
O
N

Sections marked

INSTALLATION

include “slam dunk”

wiring connections

TROUBLE-

Sections marked

TROUBLESHOOTING

include recommendations for

curing

installation problems

S
H
O
O
T

I
N
G

I

NTRODUCTION

This manual provides information on the features and installation of the
Fanatic P Systems. We suggest you save this manual for future reference.

We strongly recommend you have your Authorized Rockford Fosgate Dealer
install the Fanatic P System. If you do choose to install the system yourself,
please be sure to read the entire manual before beginning.

P

ACKAGE

C

ONTENTS

FNP1414

(2) FNP1401 Tweeters

Includes 3/4" [20mm] mylar dome tweeter,
flush mount housing, surface mount housing,

wedge mount housing
(2) Tweeter Mounting Brackets
(4) #8 32 x .500 Screws
(4) #8 32 Black Nuts
(8) #8 x .75 Phillips Screws
(2) .110 Female Fast-on Connectors
(2) .110 Male Fast-on Connectors
(2) FNP1404 4" Midrange Speakers
(2) 4" Speaker Grilles
(2) 4" Speaker Grille Rings
(2) “RF” Speaker Grille Logos
(2) FNP142x 2-Way Crossovers
(8) #8 x 1.25 Phillips Screws
(20) 18 Gauge Speaker Wire

FNP1614F

(2) FNP1401 Tweeters

Includes 3/4" [20mm] mylar dome tweeter,

flush mount housing, surface mount housing,

wedge mount housing
(2) Tweeter Mounting Brackets
(4) #8 32 x .500 Screws
(4) #8 32 Black Nuts
(8) #8 x .75 Phillips Screws
(2) .110 Female Fast-on Connectors
(2) .110 Male Fast-on Connectors
(2) FNP1406F 6" Midrange Speakers
(2) 6" Speaker Grilles
(2) 6" Speaker Grille Rings
(2) “RF” Speaker Grille Logos
(2) FNP142x 2-Way Crossovers
(8) #8 x 1.25 Phillips Screws
(20) 18 Gauge Speaker Wire

FNP1514

(2) FNP1401 Tweeters

Includes 3/4" [20mm] mylar dome tweeter,
flush mount housing, surface mount housing,

wedge mount housing
(2) Tweeter Mounting Brackets
(4) #8 32 x .500 Screws
(4) #8 32 Black Nuts
(8) #8 x .75 Phillips Screws
(2) .110 Female Fast-on Connectors
(2) .110 Male Fast-on Connectors
(2) FNP1405 51⁄4" Midrange Speakers
(2) 51⁄4" Speaker Grilles
(2) 51⁄4" Speaker Grille Rings
(2) “RF” Speaker Grille Logos
(2) FNP142x 2-Way Crossovers
(8) #8 x 1.25 Phillips Screws
(20) 18 Gauge Speaker Wire

FNP1614

(2) FNP1401 Tweeters

Includes 3/4" [20mm] mylar dome tweeter,
flush mount housing, surface mount housing,

wedge mount housing
(2) Tweeter Mounting Brackets
(4) #8 32 x .500 Screws
(4) #8 32 Black Nuts
(8) #8 x .75 Phillips Screws
(2) .110 Female Fast-on Connectors
(2) .110 Male Fast-on Connectors
(2) FNP1406 61⁄2" Midrange Speakers
(2) 61⁄2" Speaker Grilles
(2) 61⁄2" Speaker Grille Rings
(2) “RF” Speaker Grille Logos
(2) FNP142x 2-Way Crossovers
(8) #8 x 1.25 Phillips Screws
(20) 18 Gauge Speaker Wire

– 1 –

D

ESIGN FEATURES

4

5

2

3

6

1

8

9

Tweeter

1. 3/4" Mylar Dome Tweeter – To ensure accurate high frequency reproduction,

the tweeter dome must be both light and strong. The Fanatic P Component
Systems use a mylar dome that has extremely low mass and high strength for
smooth high frequency reproduction.

2. Ferrofluid Cooling – This synthetic fluid is held in place in the magnetic gap. It
bathes the voice coil allowing higher power handling and greater reliability.

3. Neodymium Magnet – What good would a tweeter be if it was too big to mount
in your favorite spot? The Fanatic Component Systems use a highly efficient
neodymium magnet to enable a very small tweeter to have very big performance.

7

– 2 –

D

ESIGN FEATURES

Midrange

4. Foam Surround – The specially treated foam surround withstands the

extremes of the automotive environment and “decouples” the cone from
the basket and the mounting surface for superior sound quality.

5. Mica Filled Polypropylene Cone – The ideal cone material would be
infinitely strong, very light and would have very high damping to ensure
great sound quality. The Fanatic P Series Component Systems use a
mica filled polypropylene cone that is strong, light and has high internal
damping to provide excellent reproduction of sound.

6. Cupped Spider – The spider has the job of centering the voice coil and
providing the rear suspension for the speaker. The Fanatic P Component
Systems use a durable cupped spider to ensure great sound with long
life and durability.

7. Large 1" Voice Coil with Anodized Aluminum Former – Just like all
Rockford Fosgate woofers, all Fanatic Component System midrange
drivers use an aluminum voice coil former for more efficient dissipation
of heat. Dissipating the heat is key to long life and high power handling,
so go ahead and crank it up!

Crossover

8. Butterworth Crossover – Features an 18dB per octave high-pass

crossover for the tweeter. The steeper slope of the tweeter crossover
gives better power handling.

9. Optical Compression – This built-in protection circuit limits power to the
tweeter when the “danger” threshold is exceeded. Because it simply
limits power and doesn't shut the tweeter off, this circuit is completely
inaudible.

– 3 –

I

NSTALLATION

Tools Needed

The following is a list of some of the tools necessary for the installation of your
speakers.

Power Drill with assorted bits #2 Phillips Screwdriver
Tape Measure Voltmeter

General

1. For safety, disconnect the negative lead from the battery prior to beginning
the installation.

2. Never run wires underneath the vehicle. Running the wires inside the vehicle
provides the best protection.

3. Avoid running wires over or through sharp edges. Use rubber or plastic
grommets to protect any wires routed through metal.

4. Mount the speakers/crossovers away from electrical sources (other than the
amplifier), i.e., power cables, electronic fuel pumps, vehicle computers,
and other potential noise sources.

5. Mount the speakers/crossovers away from areas of extreme heat or
moisture.

Speakers

1. Make sure there is an area large enough for the speaker to mount. Warning!
Failure to do this can cause damage to the speaker if the speaker frame
is bent during installation.

2. Check to see that the location is deep enough for the speaker(s) and the
location does not interfere with the normal operation of the vehicle.

3. When mounting the speaker(s) in the door of a vehicle, make sure the
speaker(s) do not interfere with either the door or window operation.

4. When mounting the speaker(s) on the rear deck of the vehicle, check the
operation of the rear hatch or trunk lid. Make sure the torsion bars and other
moving parts are not obstructed by the speaker(s) installation.

• Please refer to the Specifications section of this manual for proper mounting
diameter and depth of the speaker(s).

C

ONSIDERATIONS

Crossovers

1. Make sure there is a flat area large enough for the crossover to mount.

2. For best results, mount the crossover(s) next to the amplifier for a decorative
finish to the installation and to provide an easy upgrade (no new wires to
run) for a bi-amp Rockford Fosgate system in the future.

– 4 –

M

OUNTING LOCATION

A solid front stage with a good image is one of the most difficult tasks to achieve
in a vehicle. No car has the optimum listening environment. This makes proper
sound staging very difficult to accomplish. Most speakers tend to be placed
where they will fit easily, as opposed to where they can perform the best.

mounting location of your speakers will have a great effect on the sound quality
of your stereo system. The special care taken to place the speakers will yield
many hours of listening enjoyment in return. Several important recommenda­tions should be followed.

• Place the speakers where they have a direct
path to the listening area.

• For the best integration between the midrange
and tweeter, the tweeter should be placed
less than 2" from the midrange. (Figure 1)

• If you cannot place the tweeter less than 2"
from the midrange, then place the tweeter
more than 7" from the midrange. Placing
the tweeter 2"-7" from the midrange can
cause destructive interference (frequency
response problems) which will affect the
speaker's ability to reproduce the frequency range around the crossover
frequency of the system.

• Whenever possible, place the tweeter directly above or below the midrange
as this maximizes the imaging (point source) capability of the speakers.
(Figure 2)

Figure 1

The

2" or less

Figure 2-A

Figure 2-B

– 5 –