Robot Coupe R6Y Service Manual

OPERATION MANUAL

FOR

MODELS

R4Y Series A

Serial Numbers-R4YxxxxxxA

and

R6Y Series A

Serial Numbers-R6YxxxxxxA

robot coupe U.S.A., Inc.

P.O. Box 16625, Jackson, MS 39236-6625
280 South Perkins St., Ridgeland, MS 39157
email: [e-mail]
website: www.robotcoupeusa.com

1-800-824-1646

R4Y and R6Y Series A
Operation Manual

I. INTRODUCTION

The Robot Coupe commercial food processor performs a host
of culinary feats. It is designed for high speed and quality
vegetable processing. The Robot Coupe will chop, grind,
puree, mix, or knead using the cutter bowl attachment.

This operators manual is broken down into sections giving
you detailed instructions for assembly and operation of the
continuous feed attachment and the cutter bowl attachment.
Close attention should be paid to all instructions in this manual
to ensure a long life utilization of your food processor.

This manual should be kept within easy access
to all users for reference, and should be read
completely by all first time users of the machine.

Maintaining the food processor in good working condition is
one of the most important measures to be taken. Inspect the
machine and all parts regularly to make sure they are in good
working condition.

I. INTRODUCTION

II. ASSEMBLY/DISASSEMBLY

INSTRUCTIONS

III. OPERATING INSTRUCTIONS

IV. PREVENTIVE MAINTENANCE

GUIDE

V. TROUBLE SHOOTING AIDS

VI. SERVICE AGENCY LISTING

DO NOT operate a machine that has malfunc­tioned in any way.

Discard any food processed at the time of a mal­function and have the machine inspected and repaired at

one of the Robot Coupe Authorized Service Agencies, a list is
provided in the back of this manual. Contact one of these
service agencies for all of your service, parts and accessory
requirements.

CAUTION: Your Robot Coupe comes with a
sharp cutting “S” blade. Always handle with
safety in mind. We suggest that a pair of cut­resistant gloves be worn when handling the “S”
blade.

Machine Specifications:

The Models R4Y and R6Y are equipped with a high speed
motor generating 1 Hp which plugs into a standard 120 volt/
60 Hz, 15 amp power outlet. The full load amperage rating is
12 amps. The machines are supplied with a stainless steel
bowl. The R4Y has a 4 liter bowl and the R6Y has a 6 liter
bowl. The machines are supplied with S-blade and clear plas­tic cover. The machines are equipped with push type on/off
buttons.

R4Y and R6Y Series A
Operation Manual

II. ASSEMBLY/DISASSEMBLY

INSTRUCTIONS

Your Robot Coupe should be placed on a sturdy work surface at a comfortable working height and have a standard 115 volt
power outlet available. Always keep the machine unplugged during assembly and disassembly.

A. CUTTER BOWL ATTACHMENT

ASSEMBLY INSTRUCTIONS

Illustration #1

Become familiar with the part names as you
assemble the unit.

Always use caution and wear cut-resistant
gloves when handling the blade.

Always unplug the machine during
assembly and disassembly.

Illustration #2

1. Unplug the machine.

2. Place the bowl on the motor base assembly with the
handle located just off center, and to the left, as you are
facing the front of the unit.

Bowl Lid

(large tab to

front)

Blade

Assembly

Bowl

Control Panel

(front)

Illustration

#1

Motor Base

Assembly

Illustration

2

3

#2

3. Then, turn the bowl back counterclockwise, locking it
in place.

Illustration #3

4. Place the blade on the motor shaft. Rotate the blade
until it falls into place on the motor shaft. The bottom
blade should be just off of and parallel with the bottom of
the bowl.

4

Illustration

#3

R4Y and R6Y Series A
Operation Manual

Illustration #4

5. Facing the front of the motor base assembly, place the lid
on the bowl with the long tab turned off-center and to the left.

6. Turn the lid back to the right (counterclockwise) until it
locks in place and the long tab is centered over the handle.

7. DO NOT OPERATE THE MACHINE UNLESS
IT IS PROPERLY ASSEMBLED WITH THE LID
CENTERED ON THE BOWL AND THE LONG
TAB LOCKED IN PLACE OVER THE BOWL
HANDLE!

NEVER ATTEMPT TO DEFEAT THE SAFETY
SWITCH MECHANISM.

ALWAYS USE THE OFF SWITCH TO TURN THE
MACHINE OFF.

The Food Processor is now assembled and ready to per­form its desired function.

Illustration #4

5

6

BEFORE CONTINUING YOU SHOULD COM­PLETELY READ THE INSTRUCTIONS CON­TAINED IN THE REST OFF THIS MANUAL.