Robot Coupe R301 ULTRA Service Manual
Robot-coupe USA. Inc.
P.O. Box 16625, Jackson, MS 39236-6625
264 South Perkins St., Ridgeland, MS 39157
e-mail: info@robotcoupeusa.com - website: www.robotcoupeusa.com
Phone : 1-800-824-1646
• R 301 Series D
• R 301 Ultra Series D
SUMMARY
ENGLISH
WARRANTY
IMPORTANT WARNING
INTRODUCTION TO YOUR NEW
R 301 SeriesD•R301Ultra Series D
SWITCHING ON THE MACHINE
• Advice on electrical connections
• Control panel
ASSEMBLY
• Cutter bowl attachment
• Citrus-juicer attachment
• Vegetable preparation attachment
OPERATING INSTRUCTIONS
• Cutter bowl attachment
• Vegetable preparation attachment
CLEANING
• Motor base
• Attachments
• Blade and cutting plates
MAINTENANCE
• Motor seal
• Blade and cutting plates
• Bowl locking washer
TECHNICAL SPECIFICATIONS
• Weight
• Dimensions
• Working height
• Noise level
SAFETY
ACCESSORIES
• Coarse serrated blade
• Fine serrated blade
• Citrus-juicer
TECHNICAL DATA
• Exploded views
• Electrical and wiring diagrams
3
ROBOT COUPE U.S.A., INC. LIMITED WARRANTY
YOUR NEW ROBOT COUPE
PRODUCT IS WARRANTED TO THE
ORIGINAL PURCHASER FOR A
PERIOD OF ONE YEAR FROM THE
DATE OF PURCHASE.
This LIMITED WARRANTY is against
defects in the material and/or
workmanship, and includes labor for
replacement of defective parts,
provided repairs are performed by
an authorized service agency (see
attached list).
The Customer must inform the
Service Agency of the possibility of
warranty coverage and provide a
copy of the dated sales or delivery
receipt BEFORE W ARRANTY REPAIRS
ARE BEGUN.
Replacement parts and accessories
are warranted for ninety (90) days
from the date of purchase when
purchased separately and will be
verified by dated sales receipt OR
packing slip which lists that item.
All par ts or accessories replaced
under warranty must be returned to
the Service Agency.
THE FOLLOWING ARE NOT
COVERED BY THE ROBOT COUPE
U.S.A. INC. LIMITED WARRANTY:
Damage caused by abuse, misuse, drop-
1-
ping, or other similar damage caused by
or resulting from failure to follow assembly, operating, cleaning, user maintenance or storage
instructions.
2-Labor to sharpen and/or replacements for
blades that have become blunt, chipped or worn
after a nor mal or excessive period of use.
3-Materials or labor to replace or repair
scratched, stained, chipped, pitted, dented or
discolored surfaces, blades, knives, attachments
or accessories.
4-Any alteration, addition, or repair that has
not been carried out by the company or an approved service agency.
5-Transportation of the appliance to or from
an approved service agency.
6-Labor charges to install or test new
attachments or accessories (i.e., bowls, plates,
blades, attachments), which have been replaced
for any reason.
7-The cost of changing direction-of-rotation
of three-phase electric motors (Installer is
responsible).
8-SHIPPING DAMAGES. Visible and/or
hidden damage is the responsibility of the freight
carrier. The consignee must inform the carrier
and consignor immediately, or upon discovery in
the case of hidden defects.
KEEP ALL ORIGINAL CONTAINERS AND PACKING MATERIALS FOR CARRIER INSPECTION.
Neither ROBOT COUPE U.S.A., INC. nor its
affiliated companies or any of its distributors, directors, agents, employees, or insurers will be
liable for indirect damage, losses, or expenses
linked to the appliance or the inability to use it.
The ROBOT COUPE U.S.A., INC. warranty
is given expressly and in lieu of all other
warranties, expressed or implied, for merchantability and for fitness toward a par ticular
purpose and constitutes the only warranty
made by ROBOT COUPE U.S.A., INC.
4
IMPORTANT WARNING
WARNING
KEEP THESE INSTRUCTIONS
IN A SAFE PLACE
WARNING: In order to limit accidents such as electric shocks, personal injury or fire, and in order to limit material damage due to
misuse of the appliance, please read these instructions carefully and follow them strictly. Reading the operating instructions will
help you get to know your appliance and enable you to use the equipment correctly. The operation manual should be kept within
easy access to all users for reference and should be read completely by all first time users of the machine.
UNPACKING
• Carefully remove the equipment from the packaging and take out all the boxes or packets containing attachments or specific items.
• WARNING-some of the parts are very sharp e. g.
blades, plates … etc.
INSTALLATION
• We recommend that you install your machine on
a stable solid base at a comfortable working height.
CONNECTION
• Always check that your power supply corresponds to that indicated on the serial number plate
and that it is properly sized.
HANDLING
• Always wear cut-resistant gloves when handling
the cutting plates or the cutter blade.
ASSEMBLY PROCEDURES
• Follow the various assembly procedures carefully
(see page 6) and make sure that all the attachments
are correctly positioned.
USE
• Do not open the feed lead / attachment until
the motor has come to a complete stop.
• Never tamper with, or defeat the purpose of
the locking and safety systems.
• Do not put nonfood objects in the bowl or
vegetable prep openings.
• Always use the food pushers to push the product
into the vegetable preparation attachment openings.
• Do not leave the machine running unattended.
CLEANING
• Always unplug your machine before cleaning.
• Always clean the machine and attachments at
the end of each use.
• Never place the motor unit in water.
• For par ts made of aluminum alloys, use
cleaning detergents suitable for aluminum.
• For plastic parts, do not use detergents that are
too alkaline (i.e., containing too much caustic soda
or ammonia…).
Robot Coupe can in no way be held responsible
for the user’s failure to follow the basic rules of
cleaning and maintenance.
MAINTENANCE
• Always unplug the appliance before servicing.
• Check the seals regularly and ensure that the
safety devices are in good working order.
• It is particularly important to maintain and
check the attachments since cer tain products
contain corrosive agents e.g. citric acid.
• NOTICE
power cord or plug has been damaged.
• If the machine fails to operate as described in
this manual, or if the machine malfunctions in any
way, remove the machine from use and have it
serviced. Additionally, discard all food processed
at the time of the malfunction.
• Contact your local Authorized Service Agency if
something appears to be wrong.
: Never operate the appliance if the
ENGLISH
5
INTRODUCTION TO YOUR
NEW R 301 Series D
• R 301 Ultra Series D
The R 301 Series D / R 301 Ultra Series D is a
versatile machine designed to meet your professional needs. It can perform a number of tasks, as well
as save much in time and labor.
This food processor consists of a bowl assembly and
vegetable preparation attachment. The 3.7 quart
bowl is used for chopping, grinding, pureeing, blending, mixing, and kneading of ingredients
required in most every recipe.
A wide range of cutting plates are available for use
with the vegetable preparation attachment. Cutting
plates are available for slicing, waved slicing,
grating, pulping, and julienne.
A citrus juicer accessory is also available.
Its numerous functions will open the door to a whole
new culinary world.
Thanks to its simple design, all components
requiring frequent handling for maintenance or
cleaning can be easily assembled or removed.
All users should read this operation manual before
operating the machine.
Your R 301 Series D / R 301 Ultra Series D is fitted
with a single phase motor. It comes with a power
supply cord which plugs into a standard
120V/60Hz, 15 Amp grounded power outlet.
• CONTROL PANEL
R 301 Series D / R 301 Ultra Series D
Red knob = Off switch
Green knob = On switch
Black knob = Pulse control
1 speed 1 725 rpm.
ASSEMBLY
• CUTTER BOWL ATTACHMENT
1) With the motor base
facing you, place the
bowl onto the motor
base with the handle
toward the front. Turn
the bowl just off-center
and to the left as you lower it onto the base.
3) Place the blade onto
the motor shaft. Rotate
the blade until it drops
into place. The bottom
blade should be level
with and just of f the
bottom of the bowl.
4) Note the plastic tab
on the bowl lid. Place
the lid on the bowl with
the tab turned to the
front and slightly to the
left of the bowl handle;
then, turn the lid back to
the right until it comes to
a stop with the tab over
the bowl handle.
The device is now ready for use.
• CITRUS-JUICER ATTACHMENT
SWITCHING ON
THE MACHINE
• ADVICE ON ELECTRICAL CONNECTIONS
Before plugging in, check that your power supply
corresponds to that indicated on the machine’s
serial number plate.
WARNING
This appliance must be plugged into an
earthed socket (risk of electrocution).
6
2) Then, turn it back to
the right to lock it the
base. The handle should
cometoastopatthe
front of the motor base.
The bowl, when properly assembled should
be just off and level with
the top surface of the
motor base.
1) and 2) Operate the same way as for the bowl
attachment.
3) Place the basket on
the specific bowl delivered with the citrus juicer
attachment and rotate
until it clicks. You will
notice that the magnet of
the basket is directly
above the magnetic bar / handle.
4) Place the cone onto the motor shaft and it should
drop into place just off the surface of the basket.
Loading...