Robin EH34, EH30 PARTS LIST

PARTS MANUAL
Models
EH30 / EH34 ENGINES
PUB-EP5505A Rev . 01/00
e-mail: sales@robinamerica.com • www.robinamerica.com
© Copyright 2000 Robin America, Inc.
HOW TO USE THIS MANUAL
Robin engines are identified by MODEL, SPECIFICATION, and CODE NUMBER. For each model there may be many different versions called specifications. Each specification will be unique in some way. The difference may only be the paint color or it may have a different type of PTO or some other significant difference.
In order the identify the correct service part number, it is important to confirm the specifica­tion and code numbers for your engine. The specification and code number together are know as the PRODUCT NUMBER.
All Robin 4 cycle engines have a Product Number label similar to the label illustrated below.
PRODUCT NUMBER LABEL
PRODUCT NUMBER LABEL LOCATIONS
The Product Number Label has a 15 digit alphanumeric string that consists of the SPECIFICATION (SPEC) number (11 digits) and the CODE number (4 digits). Please note the illustration below:
E H 3 0 0
SPEC NO. (11 digits) CODE NO. (4 digits)
PRODUCT NO. (15 digits)
- 3 - '00-01
X X X X
MANUAL LAYOUT
1. SECTION NAME Parts are broadly classified according to their functions.
Refer to the Group Index (table of contents) for respective section name.
2. FIG. No. The FIG. number indexes the reference and part numbers to the illustration. Figure numbers that vary only in the tens place (i.e..: 700 and 710) are in a group of the same section (i.e..:Electrical Device Group).
3. REF. No . The Reference number identifies the part illustration with the corresponding part number in the part list.
4. SUBASSEMBLY SUBASSEMBLY parts of part assembly are listed below the assembly part. The subassembly part reference number is indicated by the number led by "-" such as "-1", "-2".
5. PART NUMBER It is the number assigned for sales unit. Use the PART No. when making an order.
6. DESCRIPTION It is designation of the part.
7. QTY. Quantity of each part used for each product.
8. REMARKS This gives a distinctive feature and/or a supplementary comment for the type, the specification,
and the part concerned. It also shows part number(s) interchangeable for the part.
9. FROM-TO This section shows the CODE No. to indicate the history of progress in which improved parts have been introduced in the product. The FROM-TO CODE No. helps to identify PART No. being employed in the product concerned. See the examples below:
- The part is used in the product irrespective of CODE No. 2101- The part is used in the products with CODE No. of 2101 and after this number.
- 2100 The part is used in the products with CODE No. of 2100 and before this number.
- 4 - '00-01
GROUP INDEX
Group Name Page
CRANKCASE GROUP ............................................................................... 6
CRANKSHAFT GROUP............................................................................ 10
INT AKE and EXHAUST GROUP ............................................................... 12
GOVERNOR GROUP................................................................................ 18
COOLING and ST ARTING GROUP ........................................................... 20
FUEL, LUBRICANT GROUP ..................................................................... 24
ELECTRIC DEVICE GROUP - RECOIL ST ART........................................ 28
ELECTRIC DEVICE GROUP - ELECTRIC STAR T................................... 32
ELECTRIC DEVICE GROUP - 150 WATT CHARGING............................. 40
ELECTRIC DEVICE GROUP - OIL SENSOR............................................ 44
INDEX OF DESCRIPTION SYMBOLS
SYMBOL DESCRIPTION
AY .......................... ASSEMBLY
CP .......................... COMPLETE
EX .......................... EXPORT (from Japan)
FIG.........................FIGURE
FR. ......................... FRONT
".............................. INCH
INCL....................... INCLUDE
~L ........................... LITER
L= ........................... LENGTH (in. mm)
L.H. (LH) ................ LEFT-HAND SIDE
MECH .................... MECHANICAL
NO (NON) .............. NONE
OPT. ....................... OPTIONAL
O.S......................... OVER SIZE
SYMBOL DESCRIPTION
P= .......................... PITCH (in mm)
P.T.O. (PTO) .......... POWER TAKE OFF
REF. .......................REFERENCE
R.H. (RH) ............... RIGHT HAND SIDE
RR. .........................REAR
STD........................STANDARD
SW ......................... SWITCH
T=...........................THICKNESS (in mm)
UN .......................... UNIT
U.S. ........................UNDER SIZE
~V .......................... VOLTAGE
~W ......................... WATT
W/ .......................... WITH
W/O ........................WITHOUT
- 5 - '00-01
SECTION 1 CRANKCASE GROUP
FIG. 100
670
270
-280
-280
EH30 & EH34 - 6 - '00-01
270
SECTION 1 CRANKCASE GROUP
REF. P ART NO. DESCRIPTION QTY. REMARKS FROM-TO FIG.
10 246-10101-31 CRANKCASE 1 EH30, single balancer
246-10101-21 CRANKCASE 1 EH30, double balancer
10 247-10101-31 CRANKCASE 1 EH34, single balancer
247-10101-21 CRANKCASE 1 EH34, double balancer 20 246-14202-03 VALVE GUIDE 2 100 30 044-03500-90 OIL SEAL 1 Ø 35 X Ø 48 X 8 10 0 40 060-03500-10 BALL BEARING 1 10 0 45 060-01500-60 BALL BEARING 1 EH30 from S/N 1023377 100
060-01500-60 BALL BEARING 2 EH30 45 060-01500-60 BALL BEARING 1 EH34
060-01500-60 BALL BEARING 2 EH34 50 031-00600-20 DOWEL PIN 2 100 60 010-50804-30 STUD 2 100 80 040-1 1400-30 PLUG 2 100 90 021-1 1400-20 GASKET 2 100
120 010-50801-20 STUD 1 100 210 246-1 1002-31 MAIN BEARING COVER 1 EH30 from S/N 1023377 100
246-1 1002-21 MAIN BEARING COVER 1 EH30 to S/N 1023376 100
210 246-1 1002-31 MAIN BEARING COVER 1 EH34 from S/N 1029603 100
246-1 1002-21 MAIN BEARING COVER 1 EH34 to S/N 1029602 100
220 044-03500-90 OIL SEAL 1 Ø 35 X Ø 48 X 8 10 0 230 060-03500-10 BALL BEARING 1 100 240 060-01500-60 BALL BEARING 1 EH30 from S/N 1023377 100
060-01500-60 BALL BEARING 2 EH30 to S/N 1023376 100
240 060-01500-60 BALL BEARING 1 EH34 from S/N 1029603 100
060-01500-60 BALL BEARING 2 EH34 to S/N 1029602 100
250 246-45001-01 GOVERNOR GEAR 1 100 260 205-41901-03 GOVERNOR SLEEVE 1 100 270 224-63601-03 OIL GAUGE 2 Includes item -280 10 0
224-63601-03 OIL GAUGE 1 W / OIL SENSOR 100
- 280 021-32000-10 GASKET 2 100 021-32000-10 GASKET 1 W / OIL SENSOR 100
290 246-15101-03 GASKET, bearing cover 1 100 300 001-13084-00 BOLT and WASHER 7 10 0 610 246-13001-31 CYLINDER HEAD 1 EH30 / Vertical spark plug 100
247-13003-01 CYLINDER HEAD 1 EH34 / Vertical spark plug 100 247-13101-1 1 CYLINDER HEAD 1 EH34 / Inclined spark plug, short studs 100
620 247-15001-13 GASKET, cylinder head 1 1 00 630 01 1-01000-40 FLANGE BOLT 4 100 670 239-16302-13 OIL SEAL 1 EH30 to S/N 1023376 100
239-16302-13 OIL SEAL 1 EH34 100
680 246-15501-02 ROCKER COVER 1 100
from S/N 1023377 100
to S/N 1023376 100
from S/N 1029603 100
to S/N 1029602 100
to S/N 1023376 100
from S/N 1029603 100
to S/N 1029602 100
EH30 & EH34 - 7 - '00-01
SECTION 1 CRANKCASE GROUP
FIG. 100
270
-280
-280
EH30 & EH34 - 8 - '00-01
270
SECTION 1 CRANKCASE GROUP
REF. P ART NO. DESCRIPTION QTY. REMARKS FROM-TO FIG.
690 246-16002-13 GASKET, rocker cover 1 10 0 700 031-00600-20 DOWEL PIN 2 100 710 01 1-00600-20 FLANGE BOLT 4 100 720 01 1-01000-20 FLANGE BOLT 1 100 730 224-17101-03 BLIND COVER 1 Recoil start 100 740 001-65081-20 BOLT 2 Recoil start 100 810 246-14301-01 BREATHER COVER 1 100 820 246-14401-01 BREATHER PLATE 1 100 830 246-16006-03 GASKET, breather cover 1 100 840 246-16007-13 GASKET, breather plate 1 10 0 850 246-10801-03 RUBBER PIPE 1 100 860 01 1-00600-30 FLANGE BOLT 2 100
EH30 & EH34 - 9 - '00-01
SECTION 2 CRANKSHAFT GROUP
FIG. 200
Balancer Shaft 1
210
Balancer Shaft 2
EH30 & EH34 - 10 - '00-01
SECTION 2 CRANKSHAFT GROUP
REF. P ART NO. DESCRIPTION QTY. REMARKS FROM-TO FIG.
10 246-20901-01 CRANKSHAFT 1 SAE 1 in. Keyway 200
246-20902-01 CRANKSHAFT 1 SAE 1.125 in. Keyway 200 246-21001-01 CRANKSHAFT 1 SAE PUMP 200 246-21201-01 CRANKSHAFT 1 SAE TAPER 200 246-20201-01 CRANKSHAFT 1 METRIC KEY 25mm 200 246-20903-01 CRANKSHAFT 1 METRIC PUMP 200 246-20701-01 CRANKSHAFT 1 METRIC TAPER 200
40 023-03501-60 SPACER ,T =0.6mm 1 Select 1 piece only 200
023-03501-70 SPACER ,T =0.8mm 1 Select 1 piece only 200 023-03501-80 SPACER ,T =1.0mm 1 Select 1 piece only 200
50 002-18180-00 NUT 1 200 60 003-20180-00 SPRING WASHER 1 20 0 65 003-10180-00 WASHER 1 20 0 70 005-32054-01 WOODRUFF KEY 1 2 00
210 246-24101-13 BALANCER SHAFT 1 1 EH30
246-24101-13 BALANCER SHAFT 1 1 EH34 to S/N 1029602 200
220 246-24102-23 BALANCER SHAFT 2 1 EH30, with 1 balancer from S/N 1023377 200
246-24102-13 BALANCER SHAFT 2 1 EH30, with 2 balancers to S/N 1023376 200 246-24102-23 BALANCER SHAFT 2 1 EH34, with 1 balancer from S/N 1029603 200 246-24102-13 BALANCER SHAFT 2 1 EH34, with 2 balancers to S/N 1029602 200
310 246-22501-00 CONNECTING ROD AY 1 Includes 320, 330 20 0 320 246-23001-03 CONNECTION ROD BOLT 2 200 330 246-23101-13 OIL SCRAPER 1 200 350 246-23301-03 PISTON PIN 1 20 0 360 246-23401-13 PISTON 1 EH30, STD 20 0
246-23402-13 PISTON 1 EH30, oversize 0.25mm 200 246-23403-13 PISTON 1 EH30, oversize 0.50mm 200
360 247-23401-13 PISTON 1 EH34, STD 20 0
247-23402-13 PISTON 1 EH34, oversize 0.25mm 200 247-23403-13 PISTON 1 EH34, oversize 0.50mm 200
370 246-23501-17 PISTON RING SET 1 EH30, STD 2 00
246-23502-17 PISTON RING SET 1 EH30, oversize 0.25mm 200 246-23503-17 PISTON RING SET 1 EH30, oversize 0.50mm 200
370 247-23501-07 PISTON RING SET 1 EH34, STD 2 00
247-23502-07 PISTON RING SET 1 EH34, oversize 0.25mm 200 247-23503-07 PISTON RING SET 1 EH34, oversize 0.50mm 200
380 056-52100-20 CLIP 2 200
to S/N 1023376 200
*** The Balancer Shaft 1 was eliminated on the EH30 and EH34
starting with S/N 1023377 and S/N 1029603 respectively.
EH30 & EH34 - 11 - '00-01
SECTION 3 INTAKE and EXHAUST GROUP
FIG. 300
C
î
NEW STYLE VALVE RETAINER
Collet type EH30 from S/N 1033819 EH34 from S/N 1053613
55
590
580
DETAIL "C"
EXHAUST DEFLECTOR
EH30 & EH34 - 12 - '00-01
SECTION 3 INTAKE and EXHAUST GROUP
REF. P ART NO. DESCRIPTION QTY. REMARKS FROM-TO FIG.
10 246-31701-01 CAMSHAFT 1 300 50 246-33301-03 TAPPET 2 300 55 246-33501-03 COLLET 2 EH30
246-33501-03 COLLET 2 EH34
60 246-3361 1-03 VAL VE SPRING 2 EH30
246-3361 1-03 VAL VE SPRING 2 EH34
70 246-3371 1-03 SPRING RET AINER 2 EH30
246-3371 1-03 SPRING RET AINER 2 EH34 75 020-02000-10 WASHER 2 30 0 80 246-3341 1-03 INTAKE VA L V E 1 EH30 from S/N 1033819 300
246-3341 1-03 INTAKE VA LVE 1 EH34 90 246-3351 1-03 EXHAUST VAL VE 1 EH30
246-3351 1-03 EXHAUST VAL VE 1 EH34
100 005-19041-00 SPRING PIN 1 3 00
1 1 0 246-36201-1 RELEASE LEVER 1 300
120 023-02200-50 SPACER T =0.6mm 1 Select 1 piece only 300
023-02200-60 SPACER T=0.7mm 1 Select 1 piece only 300
023-02200-70 SPACER T=0.8mm 1 Select 1 piece only 300
130 246-36701-03 RETURN SPRING 1 300 200 239-35001-03 ROCKER SHAFT 1 300 210 246-35301-1 1 PUSH ROD 2 300 220 246-36101-10 ROCKER ARM AY 2 300 230 014-90800-21 ADJUSTING SCREW 2 300 240 017-00800-90 NUT 2 300 250 246-36120-03 SPACER 1 3 00 310 246-30101-21 MUFFLER 1 300 320 246-34201-21 MUFFLER COVER 1 30 0 340 246-35201-03 GASKET, muffler 2 300 350 018-00800-10 FLANGE NUT 4 300 360 01 1-00600-10 FLANGE BOLT 3 300 365 001-1 1081-60 BOLT and WASHER AY 1 300 400 246-34001-01 EXHAUST PIPE 1 300 410 010-50803-60 STUD 2 300 500 246-33001-01 INTAKE PIPE 1 300 505 010-50602-30 STUD 2 300 540 246-32901-03 INSULATOR 1 300 550 246-36001-13 GASKET, intake pipe 1 300 555 001-13082-80 BOLT and WASHER A Y 3 300 560 234-35902-03 GASKET 2, insulator 2 3 00 580 015-00400-60 TAPPING SCREW 3 300 590 246-37001-07 EXHAUST DEFLECTOR 1 Includes item 580 3 00
from S/N 1033819 300 from S/N 1053613 300 from S/N 1033819 300 from S/N 1053613 300 from S/N 1033819 300 from S/N 1053613 300
from S/N 1053613 300 from S/N 1033819 300 from S/N 1053613 300
EH30 & EH34 - 13 - '00-01
SECTION 3 INTAKE and EXHAUST GROUP
FIG. 310
C
î
OLD STYLE VALVE RETAINER
Non-Collet type EH30 to S/N 1033818 EH34 to S/N 1053612
590
580
DETAIL "C"
EXHAUST DEFLECTOR
EH30 & EH34 - 14 - '00-01
SECTION 3 INTAKE and EXHAUST GROUP
REF. P ART NO. DESCRIPTION QTY. REMARKS FROM-TO FIG.
10 246-31701-01 CAMSHAFT 1 310 50 246-33301-03 TAPPET 1 310 60 246-33601-03 VALVE SPRING 2 EH30 To S/N 1033818 310
246-33601-03 VALVE SPRING 2 EH34 To S/N 1053612 310
70 246-33701-03 SPRING RETAINER 2 EH30 To S/N 1033818 310
246-33701-03 SPRING RETAINER 2 EH34 To S/N 1053612 310
75 020-02000-10 WASHER 2 31 0 80 246-33401-03 INTAKE V A LVE 1 EH30 To S/N 1033818 310
246-33401-03 INTAKE V A LVE 1 EH34 To S/N 1053612 310
90 246-33501-03 EXHAUST VAL VE 1 EH30 To S/N 1033818 310
246-33501-03 EXHAUST VAL VE 1 EH34 To S/N 1053612 310
100 005-19041-00 SPRING PIN 1 3 10
1 1 0 246-36201-1 1 RELEASE LEVER 1 310
120 023-02200-50 SPACER, T=0.6mm 1 Select 1 piece only 310
023-02200-60 SPACER, T=0.7mm 1 Select 1 piece only 310
023-02200-70 SPACER, T=0.7mm 1 Select 1 piece only 310 130 246-36701-03 RETURN SPRING 1 310 200 239-35001-03 ROCKER SHAFT 1 310 210 246-35301-1 1 PUSH ROD 2 310 220 246-36101-10 ROCKER ARM AY 2 310 230 014-90800-21 ADJUSTING SCREW 2 310 240 017-00800-90 NUT 2 310 250 246-36120-03 SPACER 1 3 10 310 246-30101-21 MUFFLER 1 310 320 246-34201-21 MUFFLER COVER 1 31 0 340 246-35201-03 GASKET, muffler 2 310 350 018-00800-10 FLANGE NUT 4 310 360 01 1-00600-10 FLANGE BOLT 3 310 365 001-1 1081-60 BOLT and WASHER AY 1 310 400 246-34001-01 EXHAUST PIPE 1 310 410 010-50803-60 STUD 2 310 500 246-33001-01 INTAKE PIPE 1 310 505 010-50602-30 STUD 2 310 540 246-32901-03 INSULATOR 1 310 550 246-36001-13 GASKET 2, intake pipe 2 31 0 555 001-13082-80 BOLT and WASHER A Y 3 310 560 234-35902-03 GASKET 2, insulator 2 3 10 580 015-00400-60 TAPPING SCREW 3 310 590 246-37001-07 EXHAUST DEFLECTOR 1 Includes item 580 3 10
EH30 & EH34 - 15 - '00-01
Loading...
+ 33 hidden pages